1
2
3
Press ç to open the disc tray and load in a disc, then press the same button again to close
the disc tray.
➜ Make sure the label side of the disc is facing up.
Playback will start automatically. If not pressÉÅ.
To stop playback, press 9.
Playing a disc
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote control) to select tuner source.
Press PROGRAM on the remote control for more than two seconds to program all
available stations in order of waveband.
Press PRESET+/- (¡ / ™ on the remote control control) until the desired preset station
is displayed.
Tip
Detailed playback features and
additional functions are described in the
accompany owner's manual.
PDCC-JS/JW-0733
Notes for remote control:
– First, select the source you wish to control by
pressing one of the source select keys on the remote
control (DISC or TUNER, for example).
– Then select the desired function (
2;
,
í
,
ë
for
example).
C Royal Philips Electronics N.V. 2007
All rights reserved.
http://www.philips.com
QUG_MCD715_93_Eng 2007.8.29, 9:554