Symmons 4500-TRM Installation guide

Symmons
Brand
Symmons
Model
4500-TRM
Category
Wall & ceiling mounts accessories
Type
Installation guide

This manual is also suitable for

Symmons 4500-TRM is a shower trim that includes a lever handle and 1 mode showerhead with a standard flow rate of 2.5 gpm. The trim is made from metal and nonmetallic materials plated in a polished chrome finish. It is compliant with ASME A112.18.1 and CSA B125.1 standards and comes with a limited lifetime warranty for residential installations and a 5-year warranty for commercial installations. The trim is easy to install and maintain, and its sleek design will complement any bathroom décor.

Symmons 4500-TRM is a shower trim that includes a lever handle and 1 mode showerhead with a standard flow rate of 2.5 gpm. The trim is made from metal and nonmetallic materials plated in a polished chrome finish. It is compliant with ASME A112.18.1 and CSA B125.1 standards and comes with a limited lifetime warranty for residential installations and a 5-year warranty for commercial installations. The trim is easy to install and maintain, and its sleek design will complement any bathroom décor.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
[email protected]
■
ZV-3058 REV 0 07/31/2014
4500-TRM, 4501-TRM
Canterbury
™
Trim Series
Operation & Maintenance Manual
Model Numbers Specifications
4500-TRM Valve Trim
4501-TRM Shower Trim
Shower trim with lever handle includes 1 mode
showerhead (4-163) with standard 2.5 gpm (9.5 L/min) ow
restrictor. Valve trim with lever handle includes shower
escutcheon only. Components made from metal and
nonmetallic materials plated in standard polished chrome
nish.
Modifications Compliance
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-2.0 2.0 gpm (7.6 L/min) flow restrictor
-442HSB 30" slide bar in place of wall cradle on
hand shower units
-STN Satin nickel finish
-ASME A112.18.1; CSA B125.1
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.
2
Dimensions
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
[email protected]
■
ZV-3058 REV 0 07/31/2014
Measurements
A Ø 2 1/4", 57 mm
B 8 1/2", 216 mm
C
Male 1/2" NPT thread must
be recessed 1/4" from
nished wall
D 7 1/2", 191 mm
E
Reference
77", 1956 mm
F 3 1/2", 89 mm
G
Reference
45", 1143 mm
H 2 13/16", 71 mm
I 3 1/16", 78 mm
J
(Rough-in)
2" ± 1/2", 51 mm ± 13 mm
Notes:
1) All dimensions measured from nominal rough-in (see J as reference).
2) Dimensions are subject to change without notice.
DD
A
G
G
E
E
B
B
J
J
Floor
Floor
CC
HH
I
I
F
F
3
Parts Breakdown
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
[email protected]
■
ZV-3058 REV 0 07/31/2014
Replacement Parts
Item Description Part Number
A
B
Shower Arm
Flange
300
C Showerhead 4-163
D
E
F
H
Plug Button
Set Screw
Handle
Star Washer
T-226
G
K
Mounting Hardware
Shower Escutcheon
T-225
I
J
Lock Nut
Dome Cover
T-19/20-PL
Notes:
1) Append -STN to part number for satin nickel nish.
2) Append -1.5 or -2.0 to showerhead for low ow.
Required for Installation
Adjustable wrench
Phillips head screwdriver
Teon Tape
B
G
C
I
J
K
E
F
H
D
A
4
Installation
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
[email protected]
■
ZV-3058 REV 0 07/31/2014
Note:
For valve body installation, please
see valve body installation guide.
1) Install shower escutcheon (K) to
shower valve. Secure with two
screws (G).
2) Install dome cover (J) to valve and
secure with lock nut (I).
3) Install handle (F) to valve and
secure with screw (E) and star
washer (H).
Attach plug
button (D) to handle.
Note: Handle should be facing the
6 o'clock position.
4) Attach shower arm (A) and
ange (B) to vertical shower pipe
turning clockwise to tighten.
5) Install showerhead
(C)
to shower
arm
(A)
turning clockwise to
tighten.
1
2
G
K
1
2
J
I
1
2
C
A
1
2
3
H
F
D
E
1
2
A
B
5
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Troubleshooting Chart
Problem Cause Solution
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ (800)796-6667 ■ Fax: (800)961-9621
©2014 Symmons Industries, Inc.
■
www.symmons.com
■
[email protected]
■
ZV-3058 REV 0 07/31/2014
1) Turn shower handle counterclockwise approximately
1/4 turn to put valve in cold position.
2) Turn shower handle counterclockwise approximately
1/2 turn to put valve in warm position.
3) Turn shower handle counterclockwise approximately
3/4 turn to put valve in hot position.
Operation
Temperature Control
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Symmons 4500-TRM Installation guide

Symmons
Brand
Symmons
Model
4500-TRM
Category
Wall & ceiling mounts accessories
Type
Installation guide
This manual is also suitable for

Symmons 4500-TRM is a shower trim that includes a lever handle and 1 mode showerhead with a standard flow rate of 2.5 gpm. The trim is made from metal and nonmetallic materials plated in a polished chrome finish. It is compliant with ASME A112.18.1 and CSA B125.1 standards and comes with a limited lifetime warranty for residential installations and a 5-year warranty for commercial installations. The trim is easy to install and maintain, and its sleek design will complement any bathroom décor.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents