Petsafe HPA11-10967, HPA11-11599, HPA11-11600, HPA11-11601, PPDS-11 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Petsafe HPA11-10967 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Freedom Door
Installation Guide and Template
Small
Medium
Large
Extra Large
Small
Medium
Large
Extra Large
Tools required:
Jigsaw Screwdriver
Drill Tape measure
5
/
16
" drill bit Ruler
Pencil Hacksaw
Drill holes for small door
Drill holes for medium door
Drill holes for large door
Radio Systems Corporation • 10427 Electric Avenue • Knoxville, TN • 37932 • 1-800-732-2677 • www.petsafe.net • ©Copyright 2007, Radio Systems Corporation
408-028/2
1
3
4
5
(X)
(X)
1a
1b
2
3
4
5
Preparing your house door Installing your pet door
Sleeve
Screw
Drill holes for extra large door
From the house interior,
position required
template base at chest
height marked on door
(X). Drill holes as
indicated.
Remove template. Cut
between holes using
jigsaw.
Hold inner pet door
frame in position. Mark
screw holes with a
pencil.
Remove inner pet door
frame. Drill holes as
indicated.
Measure pet chest
height. Mark height on
your door (X).
Insert the sleeves into
the 4 key-hole slots.
Ensure angled edges of
sleeve heads are in
position as indicated.
From the house
exterior, hold bottom
screw sleeves as
indicated.
Note:
Tape can be used
to hold screws in place.
Fit outer frame by
inserting bottom screw
sleeves first. Tilt frame
forward as indicated,
until flush with outer
door surface.
From the house interior
fit inner frame.
Measure your door
thickness. Cut screws to
suitable length. Using
screws that are too long
may damage front
frame. Do not over
tighten.
2
Fitting your flexible flap
2. Attach all nuts.
1 2 3 4
1. The flexible flap is adjustable to
fit into frame correctly.
3. HORIZONTAL ADJUSTMENT.
Move flap left or right to adjust
position. Tighten nuts when
correct.
4. VERTICAL ADJUSTMENT
Move flap up or down to adjust
position. Tighten nuts when
correct.
To get the most protection out of your limited warranty, please register your product within 90 days at www.petsafe.net. By registering, you will enjoy the
product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. Additionally, you will not have to
save your product receipt as registering serves as proof of purchase. Most importantly, PetSafe will never give or sell your valuable information to anyone.
/