Luminox XS.3803 Owner's manual

Brand: Luminox

Model: XS.3803

Type: Owner's manual

www.luminox.com

GGM.L002.GMT Ed. 08/15

7 6 1 1 3 8 2 3 9 2 7 0 1

U.S. Navy SEALs

U.S. Air Force F-117 Nighthawk Stealth Jet Pilots

Federal Bureau of Investigation (FBI)

Bureau of Alcohol, Tobacco, and Firearms (ATF)

U.S. Coast Guard

U.S. Secret Service

U.S. Border Patrol

U.S. Underwater Demolition Teams (UDT)

San Francisco SWAT

San Diego SWAT

Las Vegas SWAT

Scott Cassell - Sea Wolves and Undersea

Voyager Project

Heliswiss Switzerland

Luftrettung Christoph 2 Germany

Austrian Military Police

NATO Tigers 313 QN squadron, Netherlands

The Royal Dutch Armed Forces

Singapore Air Force

Nordseetaucher Tunnel construction divers

Special Military Forces Israel

KOPASSUS – Indonesia Special Forces

GEGANA – Indonesia Special Police Forces

…and many other Law Enforcement Groups,

Police and Fire Departments, and other elite

forces around the globe.

CONGRATULATIONS! . . . . . on the purchase of your Luminox timepiece. Highly skilled

craftsmen using the latest technologies and finest materials built your state-of-the-art watch in

Switzerland. You can be assured of many years of enjoyment and accurate timekeeping from

this exceptional timepiece.

Luminox has been the driving force in self-powered illumination Swiss watches since 1989 and

continues to push the design envelope by incorporating classic watch design (form) with state-

of-the-art unparalleled illumination technology for the ultimate in time-at-a-glance readability

(function). Luminox continues to draw from its “real world” experience by making watches for elite

military and civilian organizations such as the following: U.S. Navy SEALs, U.S. Air Force pilots,

ATF, U.S. Border Patrol, Secret Service, FBI, Coast Guard, and many other highly respected groups

of professionals in the field of law enforcement and security.

In addition, we continue to cultivate prestigious partnerships with groups such as the USBSF (US

Bobsled and Skeleton Federation) and USACK (US Canoe and Kayak Association), and have

become the watch of choice for those leading “the active life”.

Thank you for your support of our product and welcome to the “Luminox Club.”

REQUESTED BY AND SUPPLIED TO:

INSTRUCTIONS

QUARTZ MOVEMENTS

To Set the Date with Push Crowns: Pull out the crown one stop. Turn the crown clockwise

until the day/date displayed is the day before the actual date you want to set. (For example, if

today’s date is the 2nd, advance the date wheel to read the 1st). Then pull the crown out to the

second stop and rotate the crown advancing time forward, adjusting the hands until you reach

midnight. Continue to rotate the crown to your current time. If it is in the afternoon, you will

need to rotate the hour hand past 12:00 noon, the midday position. After setting the date, be

certain to push the crown in fully to ensure water resistance!

To Set the Time with Push Crowns: Pull the crown out fully (2 stops); turn in either direc-

tion to set. Push in to restart the watch. After setting the time, be certain to push in the crown

fully to ensure water resistance!

To set the Date or Time with Screw-Down Crowns: Setting the date and time with

a screw down crown watch is the same as above; however to pull out the crown you must first

“unscrew” the crown by turning it in a counter clockwise direction until the crown releases from

the threaded tube. After adjusting the date and/or time, push the crown in and screw down in a

clockwise direction until the crown is sealed in a tight position to ensure water resistance.

To use the Diving Bezel (uni-directional): Rotate the bezel counter clockwise until the

0 on the bezel lines up with the minute hand. Track elapsed time by checking the minute hand

against bezel numbers, not the dial numbers.

Note: For night timing, set the 0 on the bezel at the desired number of elapsed minutes from the

minute hand position. Although the numbers will not be counting down, the 0 mark is the point to

which you are moving. Diving bezels are meant to turn counter clockwise only. Never force the

bezel to rotate clockwise.

Note: Not all Luminox watch models will have a diving bezel.

Setting the 2nd time zone or the 24-hour time display

(in stead of a.m./p.m. time dis play):

Pull out crown B to position 1.

Rotate counter clockwise until the indicator (I) shows the desired time in the 2nd time zone or

the 24-hour scale.

Push in crown B to its normal position.

Using the GMT swivel ring: Pull out crown B to position 1. The number 24 on the outer ring,

rotatable on one or both sides (depending on model) must be set to 12 o’clock. Turn the crown

counter-clockwise until the GMT hand I shows the current time of the second time zone on the outer

ring. Press crown B back to the normal position and no longer adjust the outer ring. You can now

read the second time zone with the GMT hand I on the outer ring at any time.

To Set the 2nd Time Zone (GMT models only)

Water resistance

Luminox watches are water resistant and tested for pressures from 10 to 50 ATM, depending on

the model (as indicated on the case back of your watch), which is equal to a pressure at 100 to

500 meters depth. The water resistance is rated based on laboratory pressure tests comparable to a

swimmer or diver sitting still at that pressure level. However many water-based activities involve a lot

of movement and other environmental changes which may challenge or defeat the water protection

features of a water resistant watch.

Water resistance cannot be permanently guaranteed. Extreme sudden changes in temperature,

accidental shock to the watch, even invisible by eye on crystal, crown or pushers, or exposure

to certain chemicals containing alcohol (suncream etc) causing the gaskets in your watch to dry

out prematurely, might compromise the water resistance of your timepiece.

With the exception of the turning bezel, the crown and/or pushers should not be operated under

water. Before wearing the watch in or under water, please ensure that all moving parts are in

rest position and that the crown has been pushed/ screwed down tightly. After use, your watch

should be rinsed with clear fresh water and then cleaned and dried. Do not under any circum-

stances open the watch by yourself.

GENERAL CARE AND MAINTENANCE GUIDELINES

Like any other piece of equipment, it is recommended that periodic maintenance be perfor-

med on your timepiece. Observing the basic care and maintenance guidelines outlined below,

in conjunction with periodic service center cleanings, should ensure the reliability and prolon-

ged performance of your timepiece.

Cleaning

You should rinse your watch in fresh water occasionally to remove any sediment or other

material that may accumulate on the watch case or underneath the watch bezel during use.

This is especially important after immersion in salt water.

Crystals

Luminox watches are made with tempered mineral glass crystals, or sapphire glass crystals,

depending on the specific model. Sapphire glass crystals are highly scratch resistant; while

mineral glass crystals, though scratch resistant, are softer in composition and may exhibit sur-

face marring over time. A cracked, chipped, or loose crystal should be replaced immediately.

strap and climate that you reside in. It is normal for the leather of your strap to darken with use

over time.

LIMITED WARRANTY

This Manufacturer’s Warranty Covers: Material and manufacturing defects existing at

the time of purchase. Warranty coverage commences only if the warranty certificate is dated

and completed by an Authorized Luminox Retailer. Warranty exceptions are listed below.

Duration of Warranty Coverage: This limited warranty runs for a period two (2) years

from the original date of purchase from an Authorized Luminox Dealer. The warranty on the

Luminox Light Technology (LLT) illumination system i.e. the tiny glass tubes which light up, emplo-

yed in Luminox timepieces runs for a period of 10 years from the date of purchase.

This Manufacturer’s Warranty Does Not Cover: (1) normal wear and tear (or aging)

of band, crystal, bezel, crown, battery, or plating of metal components; (2) damage to your watch

caused by tampering with, misuse or abuse; (3) damage to the watch case or movement caused

by water entering the watch due to improper use or handling; (4) defects or damage to your

watch resulting from battery replacement, service or repairs performed by non-authorized

Luminox service or repair centers. (5) a watch obtained from an unauthorized Luminox dealer/

retailer.

During sudden temperature variations, condensation may appear underneath the crystal of

your watch. This light fogging should dissipate on its own and will not affect the operation of

the movement in your watch.

We recommend that you have the water resistance of your watch inspected every 18-24

months by an Authorized Luminox Dealer.

Battery

All Luminox quartz watches come with a 1.5 volt or Lithium 3 volt battery (depending on the

model). A 1.5 volt battery will last approximately 18-36 months and a 3 volt battery will last

approximately 36-72 months. Most Luminox movements have an EOL (end of life) feature to

indicate limited remaining battery life. When the second hand on your watch stops and then

jumps forward four (4) seconds at a time, it is time to have your battery changed.

Do not under any circumstances open the watch by yourself, please visit an Authorized

Luminox Service Centre.

Leather Straps

If the words “water resistant” are imprinted on the inside of your strap, it has been treated to

resist moisture. The longevity of a leather strap depends on your wearing habits, care of the

SERVICE INFORMATION

If your watch requires service, return it to the Authorized Luminox Service center located in your

country.

To locate an Authorized Luminox Repair Center in your country, please visit www.luminox.com

Please note that for warranty service, the watch to be repaired must be accompanied by the

following items:

• A check or money order in the amount of $15.00 to cover the evaluation and return shipping

charges (applies only to U.S.A.)

• The original Warranty Service Card (affixed to the Sales Information Card), or the Sales

Information Card itself (should you prefer to retain your Warranty Card), which has been

completed by the Authorized Luminox Retailer from whom the watch was purchased.

• The case back of the watch should be legible and not have been manually altered to conceal

or destroy any serial numbers or identifying marks that have been placed on the watch during

the manufacturing process. To ensure warranty coverage, the Warranty Card must be filled

out by an authorized Luminox retailer.

What We Will Do to Correct the Problems: If your watch proves to be defective, we

will (at our option), either repair or replace it.

Limitation of Duration of Implied Warranties; Limitation of Remedies:

THE DURATION OF ANY IMPLIED WARRANTY ON THIS WATCH, INCLUDING BUT

NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS

FOR A PARTICULAR PURPOSE, IS LIMITED TO THE DURATION OF THE LIMITED

WARRANTY STATED HEREIN. IN NO EVENT WILL THE MANUFACTURER BE LIABLE FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES. Some states do not allow limitations on how

long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

Luminox XS.3803 Owner's manual

Luminox XS.3803 Owner's manual

Luminox XS.3803 Owner's manual

Related papers