Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To find the latest information contact
your Öhlins distributor. Please
consult your Öhlins dealer if you
have any questions regarding the
contents in this document.
gif 5k01
Mounting Instructions
Part no. MI_GIF5K01_0
Issued 2011-09-20
Set-up Data
Damping Adjuster 22±10 clicks
Available range 5-30 clicks
Installed Spring
Part No Rate Length
01095-44 120N 180mm
Spring Position
Rec. Spring Position 32±5 mm
Adjust spring position with the shock absorber
on the vehicle. Manufacturing tolerances (on
vehicle) and weight balance may vary.
Mounting Instructions
Mount the shock absorber with the adjuster up.
Note!
On some vehicle models you may need to add washers
between the ball joint spacers and chassis. Manufacturing
tolerances on the chassis may vary.
Spring Position
Cylinder
head
Lock nut
measure
Ginetta G20 front
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Ohlins GIF6K01 Mounting Instruction
-
-
-
-
-
-
-
-
-
