WIRE BRUSH SAFETY
During operation, brush filaments will break off due to
wear and fly out from the brush with great force along with
materials removed from the workpiece. This can cause
serious injury for the operator and others in the work area
(up to 50 feet or farther from the operation). To reduce
the risk of serious injury from flying wires and debris, the
operator and others in the area must wear safety goggles
with side shields or face shield and protective clothing.
WARNING
To prevent serious injury:
1. Do not use with tool rated higher than 12,500 RPM.
2. Wear ANSI-approved safety goggles or face shield,
and heavy-duty work gloves during installation and use.
Loose wires forcefully thrown during use.
3. Inspect before installing and every use; do not use if wires
are loose, damaged, or worn. If wires come loose or are
missing, discontinue use immediately and discard wheel.
4. Use as intended only. Use on tool with spindle that
matches arbor and guards appropriate for wire wheels.
Avoid applying heavy pressure to prevent wire breakage.
5. Disconnect tool from power before installing.
6. Keep away from children. 20i
SAVE THESE WARNINGS
WIRE BRUSH SAFETY
During operation, brush filaments will break off due to
wear and fly out from the brush with great force along with
materials removed from the workpiece. This can cause
serious injury for the operator and others in the work area
(up to 50 feet or farther from the operation). To reduce
the risk of serious injury from flying wires and debris, the
operator and others in the area must wear safety goggles
with side shields or face shield and protective clothing.
WARNING
To prevent serious injury:
1. Do not use with tool rated higher than 12,500 RPM.
2. Wear ANSI-approved safety goggles or face shield,
and heavy-duty work gloves during installation and use.
Loose wires forcefully thrown during use.
3. Inspect before installing and every use; do not use if wires
are loose, damaged, or worn. If wires come loose or are
missing, discontinue use immediately and discard wheel.
4. Use as intended only. Use on tool with spindle that
matches arbor and guards appropriate for wire wheels.
Avoid applying heavy pressure to prevent wire breakage.
5. Disconnect tool from power before installing.
6. Keep away from children. 20h
SAVE THESE WARNINGS
WIRE BRUSH SAFETY
During operation, brush filaments will break off due to
wear and fly out from the brush with great force along with
materials removed from the workpiece. This can cause
serious injury for the operator and others in the work area
(up to 50 feet or farther from the operation). To reduce
the risk of serious injury from flying wires and debris, the
operator and others in the area must wear safety goggles
with side shields or face shield and protective clothing.
WARNING
To prevent serious injury:
1. Do not use with tool rated higher than 12,500 RPM.
2. Wear ANSI-approved safety goggles or face shield,
and heavy-duty work gloves during installation and use.
Loose wires forcefully thrown during use.
3. Inspect before installing and every use; do not use if wires
are loose, damaged, or worn. If wires come loose or are
missing, discontinue use immediately and discard wheel.
4. Use as intended only. Use on tool with spindle that
matches arbor and guards appropriate for wire wheels.
Avoid applying heavy pressure to prevent wire breakage.
5. Disconnect tool from power before installing.
6. Keep away from children. 17e
SAVE THESE WARNINGS
-
1
-
2
-
3
WARRIOR 47927 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
WARRIOR 42858 Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Bauer 64856 Owner's manual
-
Hercules Item 57348-UPC 792363573481 Owner's manual
-
Chicago Electric 62766 Owner's manual
-
Drill Master Item 60625 Owner's manual
-
-
-
-
-
-