CANNONDALE USA (CUSA)
Cannondale Bicycle Corporation
172 Friendship Road
Bedford, Pennsylvania 15522
(Voice): 1-800-BIKEUSA
(Fax): 814-623-6173
URL: http//www.cannondale.com
CANNONDALE AUSTRALIA (CA)
Unit 6, 4 Prosperity Parade
Warriewood N.S.W 2102
Australia
Phone(02)9979 5851
Fax(02)9979 5688
CANNONDALE JAPAN (CJ)
12-5 Harayamadai
5-cho Sakai City
Osaka, Japan 590-0132
(Voice): 011.81.722.99.9399
(Fax): 0722-93-6166
CANNONDALE EUROPE (CE)
mail: Postbus 5100
visits: Hanzepoort 27
7570 GC Oldenzaal
Netherlands
(Voice): +31 541 573580
(Fax): 31-5415-14240
This document online at: http://www.cannondale.com/bikes/tech/
All information and specifi cations are subject to change for product
improvement without notice.
© 2004 Cannondale Bicycle Corporation - All Rights Reserved
Publication Title Publication No.
Gemini DH
Brake Link Seals
05030A.PDF
1
3
a
a
3
4
2
1
262
5 N•m
(44 In•Lbs)
5
6
Adding Brake Link Seals
The addition of U-Cup seals (1) to
the rear Gemini DH brake link arm
assembly can reduce noise caused
by vibration (rattle) and can extend
bearing (4) life.
To install, remove the bolt (5)
and slide the link assembly down
out from the carrier (6). Wipe
the bearing (4) clean and cover it
with some bearing grease to help
prevent water intrusion. Position
the small spacers (3) against the
bearing followed by the seals with
the open side (a) facing the bearing.
Reinsert the link end with seals
between the carrier and tighten
the bolt.
GREASE
GREASE
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Cannondale GEMINI Operating instructions
-
-
-
-
-
-
-
-
Cannondale Hollowgram Si SL Cranks Operating instructions
-