D+H Montage ZA Operating instructions

Hello! I've reviewed the provided document concerning the installation of the Rack and Pinion Drive. This document details the mounting process for a turning sash that opens outward, emphasizing bracket compatibility (WK6 and FK-D), weight considerations for the window wing including glass and the importance of observing the slewing range. I'm prepared to address any questions you might have about its installation or features.
What is the weight of glass with 1mm strength?

What brackets are used with the rack and pinion drive?

What should be observed during installation?

99.950.60 1.2/05/03

Mounting Information

D+H Mechatronic AG • Georg-Sasse-Str. 28-32 • D-22949 Ammersbek • Tel. +4940-60565219 • Fax +4940-60565264

FK-D

WK6

FK-D

WK6

Rack and Pinion Drive on a Turning Sash,

opening outward

in connection with brackets WK6 and FK-D

Attention

Observe weight of window wing including glass!

(Glass of 1mm strength has a weight of 2,5kg/m²)

Observe

slewing range

Turning sash closed

(view from the top)

Turning sash opened

(view from the top)