2. Lakeshore
  3. 155 AC/DC Current and Voltage Source

Lakeshore 155 AC/DC Current and Voltage Source Operating instructions

  • Hello! I've reviewed the provided document, which is a guide for using Lake Shore rack mounting kits RM-1/2, RM-1, and RM-2. It outlines the necessary steps to mount Lake Shore instruments securely and ensure the correct clearance for proper operation. The document details procedures for attaching rack mount ears and handles. I'm ready to address any specific questions you have about these instructions or the products themselves.
  • What is the required clearance after rack mounting?
    What are the differences between the models?
    What is the first step for rack mounting?
RM-1/2, RM-1, and RM-2
Rack Mounting Instructions
Rev. 3.0 June 15, 2022
A Lake Shore instrument can be rack mounted using the optional Lake Shore rack mount kits. See below for the
different options available.
NOTE: Ensure that there is 1 in (25 mm) clearance on both sides of the instrument after rack mounting.
RM-1: Full-rack instruments
Page 2
RM-1/2: Half-rack instruments, single unit per level
Page 3
RM-2: Half-rack instruments, two units per level
Service
The most direct and efficient means of contacting Lake Shore is to complete the online service request form at
http://www.lakeshore.com/Service/. Provide a detailed description of the problem and the required contact
information. You will receive a response within 24 hours, or the next business day in the event of weekends or
holidays.
If you wish to contact Systems Service by mail or telephone, use the following:
Lake Shore Cryotronics, Inc.
575 McCorkle Blvd.
Westerville, Ohio 43082 USA
Phone: 614-891-2243 (option 6)
Fax: 614-818-1608
e-mail: [email protected]
/