Miller CYLINDER RACKS 301710 AND 301711 User manual

Brand: Miller

Model: CYLINDER RACKS 301710 AND 301711

Type: User manual

1. Safety Symbol Definitions

DANGER! - Indicates a hazardous situation

which, if not avoided, will result in death or seri-

ous injury. The possible hazards are shown in the

adjoining symbols or explained in the text.

DANGER! - Indique une situation dangereuse

qui, si elle n’est pas évitée, entraînera la mort ou

des blessures graves. Les éventuels risques sont

représentés par les symboles joints ou expliqués

dans le texte.

Indicates a hazardous situation which, if not

avoided, could result in death or serious injury.

The possible hazards are shown in the adjoining

symbols or explained in the text.

Indique une situation dangereuse qui, si elle n’est

pas évitée, entraînera la mort ou des blessures

graves. Les éventuels risques sont représentés

par les symboles joints ou expliqués dans le

texte.

NOTICE –

�

AVIS –

�

Indicates statements not related to personal

injury.

Indicates special instructions.

Signale des consignes non associées aux dom-

mages corporels.

Fournit des instructions spéciales.

Beware of electric shock from wiring. Stop engine

and disconnect negative (-) cable from battery be-

fore installing this kit. Reinstall all panels and

covers.

Attention aux chocs électriques des câbles. Arrê-

ter le moteur et débrancher le câble négatif de la

batterie avant d’installer cet ensemble. Réinstal-

ler tous les panneaux et couvercles.

Falling equipment can injure, and damage equip-

ment. Use lifting eye to lift unit and properly in-

stalled accessories only, NOT gas cylinders. Do

not exceed maximum lifting eye weight rating. Lift

and support unit only with proper equipment and

correct procedures. Follow the guidelines in the

Applications Manual for the Revised NIOSH Lift-

ing Equation (Publication No. 94-110) when man-

ually lifting heavy parts or equipment.

Oversized cylinder can cause tipping. Properly in-

stall and secure all equipment onto cart before

using cart. Always secure or remove any tools

stored on cart before moving unit. Do not lift cart

in any manner when equipment and cylinder(s)

are installed - use handles to move cart. Do not

overload handles with cables - use standard 10 to

15 foot cables as maximum lengths.

Un appareillage en chute peut blesser le person-

nel et endommager d'autres appareils. Utiliser

l'anneau de levage pour lever l'appareil et les ac-

cessoires correctement installées seuls, PAS les

bouteilles de gaz. Ne pas dépasser le poids nomi-

nal maximal de l'œilleton Soulever et soutenir

l'appareil avec le matériel et les procédures ap-

propriées. Lors du levage de pièces ou d'équipe-

ments lourds, suivre les recommandations de la

dernière révision du manuel des applications de

levage du NIOSH (Publication No. 94-110).

Les bonbonnes surdimensionnées peuvent cau-

ser les renversements. Installer et assujettir adé-

quatement tout l’équipement sur le chariot avant

d’utiliser ce dernier. Toujours assujettir ou retirer

les outils rangés sur le chariot avant de déplacer

l’unité. Ne jamais soulever le chariot, peu importe

la manière, lorsqu’il contient de l’équipement et

des bouteilles - utiliser les poignées pour dépla-

cer le chariot. Ne pas surcharger les poignées

avec des câbles - utiliser des câbles standard de

3 à 4,5 m (10 à 15 pi).

Wear safety glasses with side shields.

Porter des lunettes de sécurité avec écrans

latéraux.

CALIFORNIA PROPOSITION 65 WARNINGS

WARNING: Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

PROPOSITION CALIFORNIENNE 65

AVERTISSEMENTS

AVERTISSEMENT : cancer et troubles de la re-

production - www.P65Warnings.ca.gov.

ORIGINAL INSTRUCTIONS – PRINTED IN USA © Miller Electric Mfg. LLC 2023-08

2023-08 OM-293679B

OWNER’S MANUAL

Cylinder Racks 301710 and 301711

OM-293679 Page 2

2. Assembling Shielding Gas Cylinder Rack (301711)

Remove and discard

existing hardware

before installing tray.

293017

OM-222 Page 1

allen_wrench

NGO’s

tools/

flathead philips head wrench

pliers knife

heavy-duty workclamp light-duty workclamp wirecutter frontcutter

allen_set

needlenose steelbrush nutdriver chippinghammer

solderiron stripcrimp

drill

torque wrench socket wrench

hammer awl file

crimper

paintbrush

feelergauge flashlight ruler

toothbrush

greasegun

qtip (swab) vicegrip

handream

punch

filterwrench

strapwrench airgun

solvent pinextractor eprompuller pipewrench

torque screwdriver

crescent wrench

3/8, 1/2 in.

OM-222 Page 1

allen_wrench

NGO’s

tools/

flathead philips head wrench

pliers knife

heavy-duty workclamp light-duty workclamp wirecutter frontcutter

allen_set

needlenose steelbrush nutdriver chippinghammer

solderiron stripcrimp

drill

torque wrench socket wrench

hammer awl file

crimper

paintbrush

feelergauge flashlight ruler

toothbrush

greasegun

qtip (swab) vicegrip

handream

punch

filterwrench

strapwrench airgun

solvent pinextractor eprompuller pipewrench

torque screwdriver

crescent wrench

OM-222 Page 1

allen_wrench

NGO’s

tools/

flathead philips head wrench

pliers knife

heavy-duty workclamp light-duty workclamp wirecutter frontcutter

allen_set

needlenose steelbrush nutdriver chippinghammer

solderiron stripcrimp

drill

torque wrench socket wrench

hammer awl file

crimper

paintbrush

feelergauge flashlight ruler

toothbrush

greasegun

qtip (swab) vicegrip

handream

punch

filterwrench

strapwrench airgun

solvent pinextractor eprompuller pipewrench

torque screwdriver

crescent wrench

3/8, 1/2 in.

Item No. Dia. Mkgs. Part No. Description Quantity

1 602154 Screw, 250−20x .50 Hexwhd.50d Stl Pld Slffmg Tap−rw 6

2 293681 Bracket Assy, Support Tank 1

3 188441 Chain, Weldless 2/0 X 31.000 Bright Zinc Pld 1

4 293682 Assy, Cylinder Bracket 1

OM-293679 Page 3

3. Assembling LP Gas Cylinder (301710)

Side View − Latch Closed

Remove and discard

existing hardware be-

fore installing tray.

Adjust latch tension

so tank is secure.

LP Tank

Side View − Latch Open

293017

678

OM-222 Page 1

allen_wrench

NGO’s

tools/

flathead philips head wrench

pliers knife

heavy-duty workclamp light-duty workclamp wirecutter frontcutter

allen_set

needlenose steelbrush nutdriver chippinghammer

solderiron stripcrimp

drill

torque wrench socket wrench

hammer awl file

crimper

paintbrush

feelergauge flashlight ruler

toothbrush

greasegun

qtip (swab) vicegrip

handream

punch

filterwrench

strapwrench airgun

solvent pinextractor eprompuller pipewrench

torque screwdriver

crescent wrench

3/8, 1/2, 9/16 in.

OM-222 Page 1

allen_wrench

NGO’s

tools/

flathead philips head wrench

pliers knife

heavy-duty workclamp light-duty workclamp wirecutter frontcutter

allen_set

needlenose steelbrush nutdriver chippinghammer

solderiron stripcrimp

drill

torque wrench socket wrench

hammer awl file

crimper

paintbrush

feelergauge flashlight ruler

toothbrush

greasegun

qtip (swab) vicegrip

handream

punch

filterwrench

strapwrench airgun

solvent pinextractor eprompuller pipewrench

torque screwdriver

crescent wrench

OM-222 Page 1

allen_wrench

NGO’s

tools/

flathead philips head wrench

pliers knife

heavy-duty workclamp light-duty workclamp wirecutter frontcutter

allen_set

needlenose steelbrush nutdriver chippinghammer

solderiron stripcrimp

drill

torque wrench socket wrench

hammer awl file

crimper

paintbrush

feelergauge flashlight ruler

toothbrush

greasegun

qtip (swab) vicegrip

handream

punch

filterwrench

strapwrench airgun

solvent pinextractor eprompuller pipewrench

torque screwdriver

crescent wrench

3/8, 1/2, 9/16 in.

Assembly:

Slide tubing onto LP gas hose.

Route LP gas hose through hole in plastic

base cover.

Route LP gas hose from tank through

clamp before tightening hardware.

Item No. Dia. Mkgs. Part No. Description Quantity

1 295613 Assy, LP Tank Mtg Tray 1

2 221382 Latch, Strap LP Tank 1

3 221381 Strap, LP Tank 1

4 222350 Nut, Latch,Strap Lp Tank 1

5 602154 Screw, 250−20x .50 Hexwhd.50d Stl Pld Slffmg Tap−rw 4

6 087318 Clamp, Stl Cush 1.000 Dia X .406 Mtg Hole 1

7 010910 Washer, Flat .406idx0.812odx.065t Stl Pld Ansi.375 4

8 601871 Nut, 375−16 .68hex .25h Stl Pld 4

255131 Hose, W/Fittings LP Gas 1

221283 Tubing, Corrugated Plastic Slit 1.000 Dia X 36.000 1

170630 Label, Warning LP Gas Burns Or Explodes Easily 1

Notes

Miller CYLINDER RACKS 301710 AND 301711 User manual

Brand: Miller

Model: CYLINDER RACKS 301710 AND 301711

Type: User manual

Download PDF

report

in other languages

français: Miller CYLINDER RACKS 301710 AND 301711 Manuel utilisateur

Miller CYLINDER RACKS 301710 AND 301711 User manual

Miller CYLINDER RACKS 301710 AND 301711 User manual

in other languages

Related papers

Other documents