mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, ie. if a child attempts
to climb on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
that dierent wall materials may require dierent fixing devices from
those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
nutbolt dowel 4”35 screw 3”12 screw
A B CD E
F G HIJ
K L MN O
CL CR DL DR
HARDWARE SUPPLIED
62x 62x 32x 22x 42x
spacerclip 4”12 screw 4”35 screw wall plug
5x 5x 2x 2x 2x
4”14 screwhinge bracket 3”14 screw 3.5”12 screw
4x 24x 12x 12x 10x
slideslide slide slide
3x
P
wall anchor
2x 3x 3x 3x
Avoca
Buet
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Avoca
Buet
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
1 2
Attach 6 x bolts (A) and 3 x rail (CL) to panel [4] as shown. secure with
12 x screws (E). Tighten with a screwdriver.
Attach 6 x bolts (A) and 3 x rail (CR) to panel [5] as shown.secure with
12 x screws (E). Tighten with a screwdriver.
EE
CL
A
A
A
A
A
A
A
A
x3
EE E
CR
x3 E
Avoca
Buet
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
3 4
Attach 8 x bolts (A) to panels [2] and [3], 14 x bolts (A) to panel [7], 8 bolts to
panel [10] as shown. Tighten with a screwdriver.
Attach 4 hinge (K) to panels [12] as shown and
secure with 8 x screws (L). Tighten with a screwdriver.
Attach 12 x bolts (A) to panels [13]. Tighten with a screwdriver.
A
K
L
A
A
K
L
A
A
A
A
A
A
A
A
A
AA
A
A
A
A
A
A
A
A
A
A
Avoca
Buet
K
L
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
56
Attach 8 x bolts (A) to panels [1] as shown. Attach 5 x clips (F)
and 5 x spacers (G) to panels [1] and [8] and secure with 10 x screws (O).
Tighten with a screwdriver.
Attach assembled frames together as shown and secure with 8 x nuts
(B). Tighten with a screwdriver.
B
F
BACK!
O
x5 x5
B
B
B
G
F
Avoca
Buet
B
F
F
F
P
H
P
H
A
A
A
A
A
A
A
A
F
O
O
O
O
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
78
Attach assembled frames together as shown and secure with 2 x nuts
(B) and 2 dowels {C}. Tighten with a screwdriver.
Attach assembled frames together as shown and secure with 2 x nuts
(B) and 2 dowels {C}. Tighten with a screwdriver.
B
B
B
B
C
CC
C
Avoca
Buet
B
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
9
Attach assembled frames together as shown and secure with 4 x nuts
(B) 2 x screws {D} and 2 dowels {C}. Tighten with a screwdriver.
10
Attach assembled frames together as shown and secure with 4 x nuts (B)
2 x dowels {C}. Tighten with a screwdriver.
B
B
B
B
B
B
CC
D
D
Avoca
Buet
B
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
11 12
Slide panels [19] into position as shown. Attach panel [7] to assembled frame as shown, secure with 8 x screws (D) and 8
dowels {C} , Tighten with a screwdriver.
D
D
D
D
D
D
D
D
C
C
C
C
Avoca
Buet
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
13
Attach panels [10] and [11] together as shown and secure with
8 x nuts (B) and 8x dowels {C}. Tighten with a screwdriver.
14
Attach assembled frames together as shown and secure with 14 x nuts (B).
Tighten with a screwdriver.
BB
B
B
B
B
C
B
C
B
C
B
B
B
C
C
C
C
C
Avoca
Buet
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
15
Slide panel [18] into position as shown.
16
Attach panel [1] as shown secure with 8 x nuts (B) and 8 x dowels (C). Tighten
with a screwdriver.
B
C
C
C
C
C
C
B
B
B
B
B
B
B
Avoca
Buet
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
17
Attach 12 x braket (M) as shown and secure with 12 x screws (N). Tighten with a
screwdriver.
18
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the 2 x wall anchors (P).
Fasten to the wall using 2 x wall plugs (J) and 2 x screws (I). Attach
panel [12] to assembled frame and secure with 16 x screws (L).
Tighten with a screwdriver.
x12
K
K
M
N
M
M
M
M
M
M
M
M
M
M
x4
K
L
K
x2
PPI
J
K
P
Avoca
Buet
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
19
Attach panels [14], [15], [16] together as shown, secure with 12 x screws {D}.
Slide panel [17] into position as shown.
20
Attach panels [13] with 12 x nuts {B}. Tighten with a screwdriver.
Attach 3 x rail (DL) and 3 x rail (DR) as shown and secure
with 18 x screws (E). Tighten with a screwdriver.
B
B
D
D
EEEEEE
DL DR
Avoca
Buet
B
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
21
Slide assembled drawers into position as shown.
You’re done, enjoy!
Avoca
Buet
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI