2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Power conditioning
  5. Uninterruptible power supplies (UPSs)
  6. Schneider Electric
  7. Smart-UPS
Smart-UPS

Schneider Electric Smart-UPS Installation guide

  • Hello! I've reviewed the user guide for the APC Smart-UPS X 750 VA, 1000 VA, and 1500 VA Rack-Mount 2U devices. This guide provides important safety instructions, installation steps, and details about connecting and using the UPS, including its controllable outlet groups and SmartConnect port. I'm ready to answer any questions you have about setting up or operating your UPS.
  • How often should the battery be replaced?
    What should I do if the UPS indicates a battery over-temperature condition?
    Can I use surge protectors or extension cords with this UPS?
Installation Guide Smart-UPS X 750/1000/1500 VA
Rack-Mount 2U with APC™ SmartConnect Port
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be
followed during installation and maintenance of the Smart-UPS and batteries.
Read these instructions carefully and look at the equipment to become familiar with the device
before trying to install, operate, service or maintain it. The following special messages may appear
throughout this document or on the equipment to warn of potential hazards or to call attention to
information that clarifies or simplifies a procedure.
The addition of this symbol either to a “Danger” or “Warning” safety label indicates that
an electrical hazard exists which will result in personal injury if the instructions are not
followed.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
Product Handling Guidelines
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
<18 kg
<40 lb
18-32 kg
40-70 lb
32-55 kg
70-120 lb
>55 kg
>120 lb
Installation Smart-UPS X 750/1000/1500 VA 120 Vac Rack-Mount 2U2
Safety and General Information
Inspect the package contents upon receipt. Notify the carrier and dealer if there is any
damage.
Read the Safety Guide supplied with this unit before installing the UPS.
• Adhere to all local and national electrical codes.
• This UPS is intended for indoor use only.
• Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive dust
or humidity.
• Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.
• The battery typically lasts for two to five years. Environmental factors impact battery life.
Elevated ambient temperatures, poor quality utility power, and frequent short duration discharges
will shorten battery life.
• Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension
cords.
Battery
*Contact APC by Schneider Electric Worldwide Customer Support to determine the age of the installed battery modules.
CAUTION
RISK OF HYDROGEN SULPHIDE GAS AND EXCESSIVE SMOKE
• Replace the battery at least every 5 years or at the end of its service life, whichever is earlier.
• Replace the battery immediately when the Easy UPS indicates battery replacement is necessary.
• Replace batteries with the same number and type of batteries as originally installed in the equipment.
• Replace the battery immediately when the UPS indicates a battery over-temperature condition, or
when there is evidence of electrolyte leakage. Power off the Easy UPS, unplug it from the AC input,
and disconnect the batteries. Do not operate the Easy UPS until the batteries have been replaced.
Failure to follow these instructions can result in minor or moderate injury and equipment damage.
Installation Smart-UPS X 750/1000/1500 VA 120 Vac Rack-Mount 2U 3
Inventory
All models
(1)
(1)
(4)
(1 pair)
Rack-Mount brackets
(4)
(1)
(1)
(1)
(1)
(2)
(1)
(1)
750/1000 VA models 1500 VA models
(2) (2) (4) (2)
(1 pair)
Models with pre-installed network cards
Im
portant Safety Info
rm
ation
UPS
SA
VETHISGUIDE
T
h
is S
afety Gu
ide co
ntains im
po
r
tan
t in
struction
s th
at sho
uld
b
e fo
l
lowed
du
ring installation
an
d
m
aintenan
ce of the A
PC
T
M
b
y S
chneider
Electric equ
ipmen
t an
d batter
i
es.
It is intend
ed for b
y Sch
neid
er E
lectric custom
er
s who setup, in
stall, relocate, or m
aintain
A
PC
AP
C by S
chneider
Electr
ic equ
ipmen
t.
R
ead
, un
derstand
, and follo
w safety in
stru
ction
s co
ntain
ed in this
m
anu
al. F
ailure to follow safety
ALL
instr
uctio
ns and warning
s co
uld r
esu
lt in
equipm
ent d
am
age, ser
io
u
s inju
r
y, or d
eath.
C
hang
es and m
o
di?
catio
n
s to this unit no
t expr
essl
y ap
pro
ved
by S
chn
eider
Electric C
or
po
ration
co
uld
IT
vo
id the warranty.
Pro
duct Han
dling Guidelines
?
A
dhe
re to
a
ll na
tio
n
al a
nd
local e
lectrical
co
de
s.
?T
his equ
i
pm
e
n
t is fo
r use
in
a re
stricted a
cce
ss loca
tio
n
.
?
All wiring
mu
st b
e p
e
rfo
rm
e
d b
y a
q
ua
li?
e
d e
lectri
cia
n.
?Do
n
o
t work alo
ne
un
d
er h
azard
ou
s co
nd
ition
s.
?
T
his is in
tend
ed
fo
r in
doo
r use o
nly
.
UPS
?
Do
no
t op
era
te this
un
it in
dire
ct sun
ligh
t, in c
onta
ct wi
th ?
uid
s, or whe
re there
is exces
sive
du
st o
r h
u
m
id
ity.
?Be
su
re
the
air ve
n
ts o
n the
a
re n
ot b
locke
d
. Allow adeq
u
ate
sp
a
ce
fo
r prope
r
ve
ntila
tio
n.
UP
S
?
For a with a
fa
ctory in
sta
lled
po
UPSwe
r co
rd, con
nec
t th
e po
we
r ca
bl
e d
ire
ctly to
a wall o
utlet. Do
not use
UP
S
su
rge
p
rote
ctors o
r e
xtens
io
n co
rd
s.
?T
he
eq
ui
pm
e
n
t is he
a
vy. A
lwa
ys p
ractice
sa
fe lifti
ng
te
chn
iq u
e
s a
de
q
uate fo
r the weig
ht
o
f th
e equ
ipm
en
t.
?T
h
e b
atte
rie
s are h
e
avy. R
em
ove
th
e
b
atte
ries be
fore
in
sta
lling
the
a
nd
extern
a
l batte
ry p
acks (s), in a
UPS
X
L
BP
rack.
?
A
lways in
sta
ll s a
t th
e b
otto
m
in
ra
ck-m
o
u
nt c
X
LB
Po
n
?g
u
ra
tio n
s. T
he
m
ust be
instal
le
d a
bo
ve the
s.
UPS
X
L
BP
?A
lwa
ys insta
ll p
erip
he
ral eq
u
ipmen
t ab
ov
e
th
e in rack-m
o
un
t co
n?
g
uration
s.
U
PS
Electrical safety
?Do
n
o
t h
a
ndle a
ny m
e
tallic co
nn
e
cto
r b
efo
re p
owe
r h
as bee
n d
isco
nn
ecte
d.
?
F
or m
o
d
els with a
ha
rdwire
d
in
p
ut, the
co
nn
e
ctio
n to th
e b
ranch
circuit (m
a
ins) m
u
st b
e p
erform
ed
by a q
ua
li?e
d
e
le
ctricia
n.
?2
30
V m
odels
on
ly: In
o
rder to m
a
inta
in co
m
p
lia
n
ce
with th
e d
irective
for pro
du
cts
so
ld i
n E
u
rop
e
, o
u
tpu
t
EM
C
co
rd
s attach
ed
to th
e m
ust
U
PSno
t excee
d
1
0
m
ete
rs in le
n
gth
.
?The
pro
tec
tive
ea
rth con
d
uctor for the
UP
S ca
rrie
s th
e le
akage
cu
rre
n
t from
th
e
loa
d
d
e
vices (co
m
p
ute
r eq
u
ip
me
n
t).
An
in
sula
ted
gro
un
d
co
nd
uc
to
r is to
be
installe
d as
p
a
rt
o
f th
e
bra
nch circu
it th
at
su
p
plies the
. T
he
co
n
du
cto
r
UP
S
mu
st h
a
ve
th
e
sa
m
e
s
ize a
nd insu
latio
n m
a
te
ria l as
the
g
rou
nde
d
a
n
d u
ngrou
n
de
d b
ran
ch ci
rcu
it sup
ply con
ductors.
T
h
e con
duc
tor will typ
ica
lly b
e g
ree
n, with
or w
ith
ou
t a yello
w strip
e.
?
L
ea
kag
e cu
rre
nt for a
p
lu
gg
ab
le
, T
yp
e
A m
ay excee
d
3.5
m
A
whe
n a
sep
ara
te g
ro
u
nd
te
rm
in
a
l is u
sed
.
UP
S
?
T
h
e i
n
put g
ro
u
nd
co
n
du
cto
r m
u
st be
p
ro
p
erly b
o
nd
ed
to p
rote
ctive e
arth a
t th
e
se
rv
ice p
an
e
l.
U
PS
? If th
e in p
u
t p
owe
r is su
pp
lied
by
a
se
pa
rately derived
syste
m
, th
e g
ro
u
nd
c
on
du
cto
r mu
s
t b
e p
rop
erly b
o
nd
ed
U
PS
at the
sup
ply tra
nsfo
rm
er o
r m
oto
r g
e
ne
rato
r set.
<
1
8 kg
<4
0
lb
18
-32
kg
4
0-70 lb
32-55
kg
70-1
20
lb
>
55
kg
>
1
20 lb
su0434a
Installation Smart-UPS X 750/1000/1500 VA 120 Vac Rack-Mount 2U4
Installation
Connect the battery
Tower to rack-mount conversion 750/1000 VA
Rack-mount to tower conversion 1500 VA
Two post rack
Front mount installation 750/1000 VA
CAUTION
DAMAGE TO EQUIPMENT OR PERSONNEL
• The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the equipment.
• Connect the battery after installing the UPS in a rack.
Failure to follow these instructions could result in equipment damage and minor or moderate injury.

su0320a
su0331a
su0332
su0336a
su00335a
su0337a
su0322a
su0356a
Installation Smart-UPS X 750/1000/1500 VA 120 Vac Rack-Mount 2U 5
Center mount 750/1000/1500 VA
Four post rack installation 1500 VA
Use the APC Four Post Rail Kit (included with 1500 VA models only.)
Install the bezel and rotate the logo


su0324a
su0321a
su0323a
su0440a
su0357a
su0442a
Installation Smart-UPS X 750/1000/1500 VA 120 Vac Rack-Mount 2U6
Start Up and Configuration
Overview
Controllable outlet groups
The outlets on the UPS are configured into groups. To configure the controlled outlet features, navigate
to: Main Menu > Control > Outlet1 Control.
EcoStruxure™ Ready Smart-UPS™ Web Portal
The Web Portal allows you to remotely view the status of your
UPS, receive automatic notifications about UPS events, and
firmware updates. Visit smartconnect.apc.com to learn more.
Log onto smartconnect.apc.com or scan the QR code to begin
the registration process. For instructions on how to register
your SmartConnect-compatible UPS, visit smartconnect-
support.apc.com.
By connecting this product to the Internet using the
APC™ SmartConnect Ethernet port, you are agreeing to the
APC™ SmartConnect Terms of Use and Data Privacy Notice, as found at
smartconnect.apc.com/terms-and-privacy. The Schneider Electric Data Privacy Policy can also be found
at smartconnect.apc.com/terms-and-privacy.
120 Vac SmartSlot (except NC models)
External battery pack connector
Outlets
EPO connector
USB port
Serial port
Chassis ground screw
UPS input
Circuit breaker
APCTM SmartConnect Port
SKU Controllable Outlet Group
750 VA 1
1000 VA 1 & 2
1500 VA 1, 2, & 3
Examples of switched outlet groups
10
su1120a
su0359a
Installation Smart-UPS X 750/1000/1500 VA 120 Vac Rack-Mount 2U 7
Electrical connections
Display Interface
Select models are ENERGY STAR® qualified.
For more information on your specific model, visit APC by Schneider Electric web site,
www.apc.com.
CAUTION
HAZARD OF ELECTRICAL SHOCK
• Adhere to all local and national electrical codes.
• Wiring should be performed by qualified electrician.
• Always connect the UPS to a grounded outlet.
Failure to follow these instructions could result in minor or moderate injury.
Online LED
UPS ON/OFF key
On Battery LED
Error Detected LED
Replace Battery LED
Display interface
UP/DOWN arrow keys
ENTER key
ESC key
su0439a
su0343a
APC By Schneider
Electric
© 2021 APC by Schneider Electric. APC, the APC logo, and Smart-UPS are owned by Schneider Electric
Industries S.A.S., or their affiliated companies. All other trademarks are property of their respective
owners.
EN 990-6252B
05/2021
Location of QR Code for Operation Manual
Locate the QR code and scan it for downloading the Operation Manual
/