Topeak TT2548 Owner's manual

Topeak
Brand
Topeak
Model
TT2548
Type
Owner's manual
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture. All warranties will be
void if the product is damaged due to user crash, abuse, system alteration, modication, or used in any way not intended as described in this manual.
* The specications and design are subject to change without notice. Please contact your Topeak dealer with any questions. For USA customer service call: 1-800-250-3068 / www.topeak.com
GB
User's Guide
Link 11 Folding Chain Tool
HOW TO REPLACE CHAIN PIN
INSTALLATION INSTRUCTION FOR CAMPAGNOLO® 11-SPEED HOLLOW CHAIN PIN
3
5
2
1
4
Copyright © Topeak, Inc. 2012 M-TT2548-GB 11/12
WARRANTY
WARNING
1. When pressing in the chain pin, push down
on the top of the chain to keep it fully
engaged in the chain tool cradle. Make sure
the press pin of the chain tool is centered
against the chain pin.
MAINTENANCE
1.
2.
Lubricate and maintain tool with Teon®
based lubricant when needed.
To prevent rusting, keep tool dry.
2.
After pressing the special replacement pin into Campagnolo® 11-Speed chain and breaking o the guide portion,
the break o end of the chain rivet is required to be peened to prevent chain failure.
Press out old chain
pin and replace with
new chain pin.
Remove chain hook from lever. Hook chain and hold the target
chain rivet in center position.
Snap o new chain pin guide.
Thread in the
Adjusting Knob.
Fits multi-speed chains, including Campagnolo® 11 speed.
1. Chain Tool Grip
2. Rivet Anvil of hollow pin
3. Adjusting Knob and
Chain Pin Breaker
4. Lever with 4mm Allen Key
5. Chain Hook
HOW TO STORE LINK 11 FOLDING CHAIN TOOL
* Campagnolo® is a registered trademark of Campagnolo S.r.I. * Teon® is a registered trademark of DuPont.
1
12
23
4
Before After
3/4 Turn
Use Primary Chain Link Fence to install
or remove chain pin. Use Secondary
Chain Link Fence to loosen sti links.
Primary Chain
Link Fence
Secondary
Chain Link Fence
Target
chain rivet
Inspect chain
rivet again and
be sure chain
links can bend
freely after
replacement.
Press chain pin as
little as necessary to
loosen the sti link.
  • Page 1 1

Topeak TT2548 Owner's manual

Topeak
Brand
Topeak
Model
TT2548
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents