Koala Kare 1060-KIT Operating instructions

1060-KIT
Koala Kare
Brand
Koala Kare
Model
1060-KIT
Type
Operating instructions
®®
Replacement End Cap Instructions
P/N 387-KIT, 689-KIT, 692-KIT, 850-KIT
Koala Kare Products A Division of Bobrick
6982 South Quentin St., Centennial, CO 80112-3945
Main 303.539.8300 Toll Free 888.733.3456
Fax 303.539.8399
Koalabear.com
P/N 1013 - March 2017
Tools Required: Flat Head Screwdriver
KB100, KB101
KB102 & KB108
1. If you still have one or both end caps in place, remove them by sliding a thin at head
screwdriver (or similar tool) between the head of the cap and the side of the unit. Discard
the old end caps.
2. Take one of the new end caps and insert it into the
cylindrical recessed area located on the side of the unit.
Push it in with hand pressure until it is snug.
3. Repeat step 2 for the other side of the unit.
End Cap
  • Page 1 1

Koala Kare 1060-KIT Operating instructions

1060-KIT
Koala Kare
Brand
Koala Kare
Model
1060-KIT
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents