2. Precision Mounting Technologies
  3. AS9.C080.100

Precision Mounting Technologies AS9.C080.100 User guide

  • Hello! I've reviewed the user guide for the Precision Mount Technologies enclosure designed for Dell OptiPlex Micro PCs and the DW316 optical drive. The guide provides step-by-step instructions for installing these components into the enclosure and highlights features such as VESA mounting. I'm ready to answer your questions about the installation process or the features of the product.
  • What is included in the package?
    What is the purpose of this enclosure?
    What other devices are required?
515 58th Ave SE, Calgary, Alberta, T2H 0P7
1-888-869-7652 | [email protected]
WWW.PRECISIONMOUNTS.COM
DELL OPTIPLEX ENCLOSURE USER GUIDE
INSTALLATION ITEMS REQUIRED:
DESCRIPTION
Dell OptiPlex Enclosure (Included)
6-32 Thumbscrew (Included)
Zip tie (Included)
Dell DW316 Optical Drive (with USB cable) (not included)
Dell OptiPlex 5000 Micro (not included)
QTY
1
1
3
1
1
Description
Part Number
ENCLOSURE FOR DELL OPTIPLEX MICRO OPTICAL
DISK DRIVE
AS9.C080.100
Dell OptiPlex Enclosure
6-32 Thumbscrew
PACKAGE CONTENTS
Zip tie
515 58th Ave SE, Calgary, Alberta, T2H 0P7
1-888-869-7652 | [email protected]
WWW.PRECISIONMOUNTS.COM
INSTALLATION PROCEDURE
Step 1: Lay the enclosure on a flat
surface as shown Step 2: Place the DW316 optical drive in the pocket
upside down as shown. The tray should face the
front side of the enclosure
Front side
Step 3:
Invert and slide the OptiPlex into the enclosure on top
of the optical drive as shown. Note that the USB cable
is connected to both devices before fully inserting the
OptiPlex
Step 4:
Fasten the retaining Thumbscrew
Step 5:
The VESA 100 holes on the OptiPlex are
available for mounting to compatible equipment
VESA
holes
Step 6:
Connect remaining cables and installation is now
complete
/