Alula BAT-Connect Quick start guide

ALULA HARDWARE SETUP GUIDE FOR BAT-Connect

Follow these steps BEFORE POWERING THE DEVICE

If you are not a registered dealer with Alula, please visit

www.Alula.com/pro-signup to register, or call 1.888.88.Alula.

You must rst register the customer and device on AlulaConnect.com

Once logged in to AlulaConnect.com, create a new account and register the

BAT-Connect to the account using the following process:

1. Create Customer Account

Enter your customer’s information such as username, password and vital information

2. Register Hardware

Add device “Friendly Name”, i.e. “Smith Home”

Enter MAC ID and CRC found on inside cover of BAT-Connect

STOP!

Follow instructions on reverse side BEFORE POWERING THE DEVICE

47-0068-01 • RevB • 2020-03-24

Tech Support Line • (888) 88-ALULA • (888) 882-5852

alula.net

information (see reverse side)

Connect to panel according to install guide and

site conguration

3 4

Power and verify operation of sensors/zones

and Central Station reporting functions

Download apps for an interactive experience

3. Notication Setting

Set customer’s notication preferences

4. Central Station

Add Central Station connection type, Caller ID

number, and account number