ATS MACHINE SAFETY MG-3 Ram Mount Milling Machine Guard User manual

Hello, I'm your chat assistant. I've reviewed the product details for the Milling Machine Guard MG-3. It's a bolt-on guard with features like adjustable arms, a curved lexan shield and optional safety switch. I am ready to answer your questions about this product.
Can the safety switch be added later?

Does the installation require drilling?

What is included with the MG-3 guard?

Is the shield adjustable?

What material is the milling machine guard made of?

Ram Mount Milling Machine Guard

Part # MG-3

Optional safety switch / interlock.

Can be added at a later date also.

Our most popular milling machine guard.

Installed photos.

Features:

•Installs in minutes - Truly bolt-on, no drilling

required to install.

•Front arm swings open to the left 180 degrees

for easy setup and work access

•Heavy duty steel adjustable handles- pull out

and orient 360 degrees

•Articulating arms allow operator to easily

position the shield to fit different workpieces

or fixtures.

•Includes curved lexan shield only. We also

have an optional 3-sided and flat shield.

•All CNC billet aluminum construction, Powder

coated “Safety Orange”

•Made in USA

Bolts directly to the existing threaded hole

(lifting point) on the ram. No drilling into the

machine to install!

We will ask for the brand of your machine or 2

measurements when ordering so that we can supply

you the correct hardware and arms!

Horizontal mounting rail and adjustable

bracket allow the guard to be re-positioned

if tilting the head over at an angle.

The included upper bracket allows the digital readout to be

re-located.

The MG-3 comes with the curved lexan shield, RMS-1.

The Optional flat shield is used when the curved shield is not possible, such as

when using a rotary indexer, or the head is tilted at an angle.

Custom shields available.

INCLUDED

OPTIONAL