2. ASA Electronics
  3. MOOMBACAM1

ASA Electronics MOOMBACAM1 Operating instructions

  • Hello! I have reviewed the Work Instruction for the Camera Kit MOOMBACAM1. It provides a step-by-step process for assembling the Camera kit, from gathering parts to final inspection. I'm ready to answer your questions about it.
  • What is the first step in this work instruction?
    What should be placed in the box?
    What needs to be done after placing parts in box?
    What is the final step in this work instruction?
Date: 6/19/2023
Written By
Doc. Revision: A R. Priddy
Revision Date: Approved By
ASA Model #: MOOMBACAM1 Joe Caban
Work Instruction: MOOMBACAM1
1. Pull parts per JDE work order
2. Place parts and packing bubbles in the box
3. Put label on the outside of the box.
4. Get First article inspection.
6/19/2023 1
/