Acer P1270 Quick start guide

Type
Quick start guide

This manual is also suitable for

S-Video Output
RS232
DVD player,
Set-top Box,
HDTV receiver
DVD player
VGA
Video Output
VGA
Internet
R B G
HDTV adapter
RS232
HDMI
HDMI
D-Sub
D-Sub
D-Sub
D-Sub
USB
Y
Y
R B G
USB
1
2
3
4
5
6
7
8
9
10
11
9
2
1
3
4 5 6
7
8
10
mo le x
E62405SP
R
INSTALLATION
INTERFACE CONNECTOR
Note: Connector interface is subject to model’s specifications
Bahasa Indonesia
PEMASANGAN
Menghubungkan ke komputer
1. Pastikan projektor dan komputer
dalam keadaan tidak menyala.
2. Hubungkan satu ujung kabel VGA
dengan konektor “VGA IN” pada
projektor, lalu hubungkan ujung
lainnya dengan konektor VGA pada
computer kemudian kencangkan
bautnya.
3. Hubungkan satu ujung kable daya
dengan soket daya AC pada projektor,
lalu hubungkan ujung lainnya dengan
sumber listrik.
Menyalakan Projektor
1. Buka tutup lensa.
2. Nyalakan projektor terlebih dahulu
kemudian baru nyalakan komputer.
3. Sesuaikan posisi, fokus, dan zoom.
4. Mulailah presentasi.
Mematikan Projektor
1. Tekan tompol daya dua kali.
2. Jangan cabut kabel daya AC dari
sumber listrik sebelum kipas projektor
mati.
KONEKTOR PENGHUBUNG
Memulai dengan Cepat
1. Kabel Daya
2. Kabel VGA
3. Kabel Video Composite
4. Kabel USB
5. VGA to Component/HDTV Adapter
6. Kabel S-Video
7. Kabel Audio Jack/Jack
8. Kabel RS232
9. Kabel HDMI
10. 3 kabel komponen RCA
11. Kabel LAN
Catatan: Interface konektor tergantung pada spesifikasi
model
English
INSTALLATION
Connecting to a Computer
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable
to the “VGA IN” connector on the
projector; connect the other end to
the VGA connector on the computer
and tighten the screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to an
electrical outlet.
Powering On the Projector
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run you presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut
down.
INTERFACE CONNECTOR
Quick Start
1. Power Cord
2. VGA Cable
3. Composite Video Cable
4. USB Cable
5. VGA to Component/HDTV Adapter
6. S-Video Cable
7. Audio Cable Jack/Jack
8. RS232 Cable
9. HDMI Cable
10. 3 RCA Component Cable
11. LAN Cable
Note: Connector interface is subject to model’s specifications
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Acer P1270 Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI