Edirol PR-80 Owner's manual

Brand: Edirol

Model: PR-80

Category: Musical Instruments

Type: Owner's manual

Information

When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor

in your country as shown below.

As of August 20, 2004 (EDIROL-2)

ASIA

TAIWAN

ROLAND TAIWAN

ENTERPRISE CO., LTD.

Room 5, 9fl. No. 112 Chung Shan

N.Road Sec.2, Taipei, TAIWAN,

R.O.C.

TEL: (02) 2561 3339

CHINA

Roland Shanghai Electronics Co.,Ltd.

5F. No.1500 Pingliang Road

Shanghai 200090, CHINA

TEL: (021) 5580-0800

Roland Shanghai Electronics Co.,Ltd.

(BEIJING OFFICE)

10F. No.18 Anhuaxili

Chaoyang District, Beijing 100011

CHINA

TEL: (010) 6426-5050

Roland Shanghai Electronics Co.,Ltd.

(GUANGZHOU OFFICE)

2/F., No.30 Si You Nan Er Jie Yi

Xiang, Wu Yang Xin Cheng,

Guangzhou 510600, CHINA

TEL: (020) 8736-0428

AUSTRALIA

Roland Corporation

Australia Pty., Ltd.

38 Campbell Avenue

Dee Why West. NSW 2099

AUSTRALIA

TEL: (02) 9982 8266

CENTRAL/LATIN

AMERICA

CZECH REP.

K-AUDIO

Kardasovska 626.

CZ-198 00 Praha 9,

CZECH REP.

TEL: (2) 666 10529

DENMARK

Roland Scandinavia A/S

Nordhavnsvej 7, Postbox 880,

DK-2100 Copenhagen

DENMARK

TEL: 3916 6200

FINLAND

Roland Scandinavia As,

Filial Finland

Elannontie 5

FIN-01510 Vantaa, FINLAND

TEL: (0)9 68 24 020

GERMANY

Roland Elektronische

Musikinstrumente HmbH.

Oststrasse 96, 22844 Norderstedt,

GERMANY

TEL: (040) 52 60090

GREECE

STOLLAS S.A.

Music Sound Light

155, New National Road

Patras 26442, GREECE

TEL: 2610 435400

HUNGARY

Roland East Europe Ltd.

Warehouse Area ‘DEPO’ Pf.83

H-2046 Torokbalint, HUNGARY

TEL: (23) 511011

BRAZIL

Roland Brasil Ltda

Rua San Jose, 780 Sala B

Parque Industrial San Jose

Cotia - Sao Paulo - SP, BRAZIL

TEL: (011) 4615 5666

OTHERS incl. MEXICO

Roland Audio Development

Corp.

14830 Desman Rd.

La Mirada, CA 90638

U.S.A.

Tel: 1-714-521-8000

email : [email protected]

AUSTRIA

Roland Elektronische

Musikinstrumente HmbH.

Austrian Office

Eduard-Bodem-Gasse 8,

A-6020 Innsbruck, AUSTRIA

TEL: (0512) 26 44 260

BELGIUM/FRANCE/

HOLLAND/

LUXEMBOURG

Roland Central Europe N.V.

Houtstraat 3, B-2260, Oevel

(Westerlo) BELGIUM

TEL: (014) 575811

EUROPE

IRELAND

Roland Ireland

G2 Calmount Park, Calmount

Avenue, Dublin 12

Republic of IRELAND

TEL: (01) 4294444

ITALY

Roland Italy S. p. A.

Viale delle Industrie 8,

20020 Arese, Milano, ITALY

TEL: (02) 937-78300

NORWAY

Roland Scandinavia Avd.

Kontor Norge

Lilleakerveien 2 Postboks 95

Lilleaker N-0216 Oslo

NORWAY

TEL: 2273 0074

POLAND

MX MUSIC SP.Z.O.O.

UL. Gibraltarska 4.

PL-03664 Warszawa POLAND

TEL: (022) 679 44 19

PORTUGAL

Roland Iberia, S.L.

Portugal Office

Cais das Pedras, 8/9-1 Dto

4050-465, Porto, PORTUGAL

TEL: 22 608 00 60

ROMANIA

FBS LINES

Piata Libertatii 1,

535500 Gheorgheni, ROMANIA

TEL: (266) 364 609

RUSSIA

MuTek

3-Bogatyrskaya Str. 1.k.l

107 564 Moscow, RUSSIA

TEL: (095) 169 5043

SPAIN

Roland Iberia, S.L.

Paseo García Faria, 33-35

08005 Barcelona SPAIN

TEL: 93 308 10 00

SWEDEN

Roland Scandinavia A/S

SWEDISH SALES OFFICE

Danvik Center 28, 2 tr.

S-131 30 Nacka SWEDEN

TEL: (0)8 702 00 20

SWITZERLAND

Roland (Switzerland) AG

Landstrasse 5, Postfach,

CH-4452 Itingen,

SWITZERLAND

TEL: (061) 927-8383

UKRAINE

TIC-TAC

Mira Str. 19/108

P.O. Box 180

295400 Munkachevo, UKRAINE

TEL: (03131) 414-40

UNITED KINGDOM

Roland (U.K.) Ltd.

Atlantic Close, Swansea

Enterprise Park, SWANSEA

SA7 9FJ,

UNITED KINGDOM

TEL: (01792) 702701

U. S. A. / CANADA

EDIROL Corporation

North America

425 Sequoia Drive, Suite 114

Bellingham, WA 98226

U. S. A.

TEL: (360) 594-4273

FAX: (360) 594-4271

http://www.edirol.com/

EUROPE

EDIROL (Europe) Ltd.

Studio 3.4 114 Power Road

London W4 5PY

U. K.

TEL: +44 (0)20 8747 5949

FAX:+44 (0)20 8747 5948

http://www.edirol.com/europe

Deutschland

TEL: 0700 33 47 65 20

France

TEL: 0810 000 371

Italia

TEL: 02 93778329

AUSTRALIA

Thank you for your purchase of the PR-80 Realtime Video Presenter.

201b

Before using this unit, carefully read the sections entitled:“USING THE UNIT

SAFELY” (DV-7DL PRO Owner’s Manual P.4), and “IMPORTANT NOTES” (DV-7DL

PRO Owner’s Manual p.6). These sections provide important information concerning

the proper operation of the unit. Additionally, in order to feel assured that you have

gained a good grasp of every feature provided by your new unit, Owner’s manual

should be read in its entirety. The manual should be saved and kept on hand as a

convenient reference.

Owner’s Manual

03892556 ’05-1-1KS

Owner’s Manual

To resize thickness, move all items on the front cover

and center registration marks to left or right

206j

* Windows® is known officially as: “Microsoft® Windows® operating system.”

207

* Apple and Macintosh are registered trademarks of Apple Computer, Inc.

209

* Mac OS is a trademark of Apple Computer, Inc.

220

* All product names mentioned in this document are trademarks or registered trademarks of their

respective owners.

237

* V-LINK ( ) is a trademark of Roland Corporation.

202

without the written permission of ROLAND CORPORATION.

The features of the Presenter

Described in the "PR-80 Owner's Manual" (this document).

Play Back High-Quality Video in Real Time

You can play back and switch high-quality DV-format video images in real time.

A Variety of Realtime Effects

Use a variety of video effects in real time, including switching effects for smooth transitions between

video images, control of playback speed, resetting of retrigger points, and more.

A variety of External Control Functions

Not only can you use the keyboard and mouse, you can select from a number of different ways to

control the PR-80. You can use the RS-232C port, optional touch screen, or use the optional DV-7DLC

controller, a UM-1 or other UM Series USB MIDI interface, or the PCR-50 MIDI keyboard.

Dual-stream Playback

You can play back two pieces of video material at the same time for cross-dissolving or mixing.

Effects

Real-time effects such as Vertical Split and Colorize are built in.

Masking

You can use title masks to cut out any shape you want from the final video output.

A Variety of Ways to Connect

You can use the V-LINK function to exhibit video during musical performances, create virtual clips

of live video sources with the V-4 (video mixer) control, use the Presenter Control for simple and easy

coordination of multiple PR-80s and DV-7PRs, work with multichannel audio sources with the AR

(Roland AR Series control), and more.

Can Be Used with a Removable Hard Disk

You can use an optional removable hard disk (DV-HD Series) for transport and backup of your video

data. This data is also mutually compatible with data from DV-7 Series devices.

Import Video Material Created on Computers

Using the CD-ROM or network functions and a digital video connection, you can import video

material created on computers.

Simple Sequencer Function

You can play multiple clips in a specified sequence, or have a specified clip play automatically upon

startup.

Automatic Operations with the Scheduler

You can use the Scheduler to have the PR-80 automatically perform a variety of functions, such as playing back data, stopping,

synchronizing times over a network, or starting up at a predetermined time.

To resize thickness, move all items on the front cover

and center registration marks to left or right.

For the USA

DECLARATION OF CONFORMITY

Compliance Information Statement

Model Name :

Type of Equipment :

Responsible Party :

Address :

Telephone :

PR-80

Realtime Video Presenter

Edirol Corporation North America

425 Sequoia Drive, Suite 114, Bellingham, WA 98226

(360) 594-4273

Before Using the PR-80

PR-80: Realtime Video Presente

962a

* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior

notice.

Supported TV Systems

NTSC or PAL

(Differing according to regional specifications)

Video Format

DV Format

Audio Format

PCM (16 bits, 48 kHz)

Input/Output Connectors

Front

Video Input/Output

DV Jack (i.LINK):

4-pin type (conforms to IEEE1394)

Audio Output

Headphones Jack: Stereo 1/4 inch phone type

Rear

Video Input/Output

DV Jack (i.LINK):

4-pin type (conforms to IEEE1394)

Video Input

S-Video: 4-pin mini DIN type

(Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms)

Composite: RCA phono type

(1.0 Vp-p, 75 ohms)

Audio Input (L, R)

RCA phono type

Video Output

S-Video output: 4-pin mini DIN type

(Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms)

Composite: RCA phono type

(1.0 Vp-p, 75 ohms)

BNC type

(1.0 Vp-p, 75 ohms)

Audio Output (L, R)

RCA phono type

Storage Devices

Internal Hard Disk Drive

80 GB (for system program and data storage)

Expansion Slot

Removable Hard Disk: 1 slot (for optional DV-HD series)

CD-ROM Drive

Control Interfaces

• PS/2: 6-pin mini DIN type x 2 (for mouse and

keyboard)

• LAN Port: 10/100 Base-T x 1

• Serial Port: RS-232C x 1

• USB: A type x 4 (for optional controller, card

reader, and MIDI interfaces)

Display Output

HD DB-15 type (Analog RGB, resolution 1024 x 768 fixed)

Power Supply

AC 117 V, AC 230 V, AC 240 V (50/60 Hz)

AC 220 V (60 Hz)

Power Consumption

90 W

Dimensions

360 (W) x 420 (D) x 130 (H) mm

14-3/16 (W) x 16-9/16 (D) x 5-1/8 (H) inches

Weight

8.5 kg / 18 lbs 12 oz

Accessories

Mouse (PS/2)

Mouse Pad

DV Cable

Power Cord

DV-7DLC Template Sheet

Owner's Manual

Options

Video Editing Controller: DV-7DLC

Removable Hard Disk: DV-HD120

USB Card Reader: DL-CR1

Main specifications

Before Using the PR-80

Editor Features

These are described in the "DV-7DL PRO Owner's Manual."

The PR-80 is equipped with the editing features of the DV-7DL PRO, and lets you use them to edit

video.

Direct Linear Editing

This unit has a wide range features that let you perform editing intuitively, and despite being a non-

linear editing device, it makes it possible for you to carry out direct linear editing with with the feel

of a linear editing system.

A Simple, Easy-to-understand Digital-Video Editing Unit

This unit boasts video-editing features that enable even first-time users to get started right away.

Intuitive A/B Roll Editing

The unit features an A/B roll editor that lets you switch intuitively between pieces of video material.

When you use the optional DV-7DLC, you can perform A/B roll editing with a linear-editing feel.

Nonstop Editing Features

This unit is equipped with nonstop editing features that let you edit a sequence as you play it back.

For instance, you can perform such editing operations as inserting video, titles, and narration without

stopping sequence playback.

Real-time Processing

Real-time processing features let you carry out video editing with versatile effects (dissolve and

wipe), titles, and even two-picture compositing such as picture-in-picture and double exposure,

without having to render.

High-quality Audio Processing

Roland's audio-processing technology lets you perform high-quality audio processing. You can

apply such audio effects as a four-band equalizer and compressor.

Create Sophisticated Titles with Ease

•A Rich Array of Text Embellishments

You can enhance text with such embellishments as edge, shadow, and see-through text. The unit also

comes with 22 font styles, enabling you to create titles perfectly matched to the mood and

atmosphere.

•A Wide Range of Shape-drawing Features

In addition to creating text, you can also draw circles, squares, and opacity, as well as lines and

curves. By combining these shapes, you can create titles that are even more expressive.

• Capture Video from External Sources

You can capture photographs shot with a digital camera as well as graphics from other external

sources by using CD-ROMs and the optional DL-CR1 memory-card reader.

• Create Rolling and Crawling Titles

You can easily use the Titler to create rolling and crawling titles. It's also possible to capture text files

from a computer.

PR-80_e.book 3 ページ２００５年１月６日　木曜日　午後９時２２分

Contents

Before Using the PR-80 ..........................................................................2

Contents ..................................................................................................4

Before Using the PR-80 ..........................................................................6

About This Manual .................................................................................................................................... 6

When First Operating the PR-80 ................................................................................................... 6

Other Notes ................................................................................................................................................. 7

About the Hard Disk ...................................................................................................................... 7

About the Shortcut Keys ................................................................................................................ 7

About the DV-7DLC Templates.................................................................................................... 7

Names of Things and What They Do ...................................................................................................... 8

Front Panel ....................................................................................................................................... 8

Rear Panel......................................................................................................................................... 9

Setting Up and Connecting Equipment ................................................................................................ 10

Instructions for Connecting Digital Video Devices Equipped with DV Connectors.......... 11

Connecting to a Computer Over a Network............................................................................. 12

Examples of Using and Connecting the PR-80..................................................................................... 13

Usage Examples ............................................................................................................................ 13

Connection Examples ................................................................................................................... 15

Working with the Keyboard and Mouse .............................................................................................. 22

About the Keyboard and Included Mouse................................................................................ 22

About Operations with the Mouse ............................................................................................. 22

Introduction to Use of the PR-80 .........................................................24

How the PR-80 is Organized .................................................................................................................. 24

Selector............................................................................................................................................ 24

Presenter......................................................................................................................................... 24

Editor .............................................................................................................................................. 24

Basic Workflow......................................................................................................................................... 25

What is V-LINK? ...................................................................................................................................... 32

Names of Things in Screens/What They Do........................................................................................ 33

Selector............................................................................................................................................ 33

Play Mode ...................................................................................................................................... 33

Edit Mode....................................................................................................................................... 37

Utility .............................................................................................................................................. 40

System Preferences ....................................................................................................................... 41

Turning the Power On and Off .............................................................................................................. 43

Turning On the Power.................................................................................................................. 43

Turning Off the Power ................................................................................................................. 44

Creating and Opening Projects............................................................................................................... 45

What is a Project? .......................................................................................................................... 45

The Relationship Between Materials, Clips, and Palettes ....................................................... 45

Creating Projects ........................................................................................................................... 45

Opening Projects ........................................................................................................................... 46

To Copy or Delete a Project ......................................................................................................... 47

Playing Back Clips.................................................................................................................................... 48

Using the Mouse to Play Back Clips........................................................................................... 48

About the Video Output Monitor Display ................................................................................ 49

Switching the Palette .................................................................................................................... 51

Transition Effects........................................................................................................................... 52

Dual Stream.................................................................................................................................... 53

Effects.............................................................................................................................................. 54

Color Correction............................................................................................................................ 55

Masking .......................................................................................................................................... 56

Color Bar......................................................................................................................................... 57

Turning Loop Playback On and Off........................................................................................... 58

Assigning Materials to Palettes .............................................................................................................. 59

PR-80_e.book 4 ページ２００５年１月６日　木曜日　午後９時２２分

Contents

Saving Projects .......................................................................................................................................... 61

Using V-LINK ........................................................................................................................................... 62

Practical Use of the PR-80 ...................................................................64

Making the Settings for the Project........................................................................................................ 64

Editing Palettes.............................................................................................................................. 65

Making the Palette Settings ......................................................................................................... 66

Editing Clips .................................................................................................................................. 67

Making the Clip Settings.............................................................................................................. 70

Changing Material Settings ......................................................................................................... 76

Setting Automatic Playback ........................................................................................................ 77

Importing Materials ................................................................................................................................. 78

Importing Materials from Another Project ............................................................................... 78

Capturing Video from a Video Deck or Other Device ............................................................ 79

Importing Video from an Editor Library................................................................................... 80

Importing Materials Created with a Computer........................................................................ 81

Importing Masks Created on a Computer ................................................................................ 83

Organizing Projects.................................................................................................................................. 84

Copying Projects ........................................................................................................................... 84

Deleting Projects............................................................................................................................ 85

Using Scheduler to Control Presenter ................................................................................................... 86

Starting the Scheduler .................................................................................................................. 86

Creating a Schedule ...................................................................................................................... 87

Deleting a Schedule ...................................................................................................................... 87

Activating Scheduler .................................................................................................................... 87

Controlling Presenter with MIDI ........................................................................................................... 88

Using MIDI Devices...................................................................................................................... 88

Using Other Devices to Control Presenter.......................................................................................... 100

Using a DV-7DLC ....................................................................................................................... 100

Using the RS-232C Connector ................................................................................................... 105

Using a Touch Panel Display .................................................................................................... 105

Controlling Other Devices with the PR-80 ......................................................................................... 106

Controlling Another Presenter.................................................................................................. 106

Controlling the V-4 ..................................................................................................................... 107

Controlling AR Series Devices .................................................................................................. 110

Making the System Settings.................................................................................................................. 111

Eliminating Flicker in the Operational Display...................................................................... 111

Automatically Starting Up Presenter ....................................................................................... 112

Using an External Power Switch to Turn the Power On and Off ........................................ 112

Making the Network Settings ................................................................................................... 113

Making the Touch Panel Display Settings............................................................................... 116

Other System Settings................................................................................................................. 116

Specifications......................................................................................117

Keyboard shortcut keys......................................................................................................................... 117

When using the Play Mode of Presenter ................................................................................. 117

When using the Edit Mode of Presenter.................................................................................. 117

MIDI implementation (Presenter)........................................................................................................ 118

RS-232C Command Reference (Presenter).......................................................................................... 131

Command Overview .................................................................................................................. 131

About the Protocol ...................................................................................................................... 131

Commands Sent from an External Device to the Presenter.................................................. 132

Commands Sent from the Presenter to an External Device.................................................. 136

About the Removable Hard Disk......................................................................................................... 138

Precautions to Note When Using Disks................................................................................... 138

Instructions for Installing the Hard Disk................................................................................. 139

Index.....................................................................................................140

PR-80_e.book 5 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

About This Manual

This Owner’s Manual contains the following sections.

Before Using the PR-80

This section includes cautionary notes regarding use of this device, descriptions of the front and rear

panels, and examples showing different ways to set up and connect the device.

Introduction to Use of the PR-80

This section goes over the procedural sequences used in operating the PR-80, provides descriptions

of the different screens, and explains how to use the PR-80 to play back video images.

Practical Use of the PR-80

This section explains how to control the PR-80 with external devices and provides detailed

instructions for using the PR-80’s functions, allowing you to gain full control of the device.

Reference

This section contains the MIDI Implementation, device specifications, and other data for the PR-80.

When First Operating the PR-80

• If operating the PR-80 for the first time, please read “Basic Workflow” (p. 25). This section

provides a general overview of operations using the PR-80, from turning on the power to playing

back and loading prepared data, in a manner that allows an easy grasp of how the PR-80 works.

• Most of the procedures involve using the mouse or keyboard while viewing the PR-80’s screens.

If you find you do not understand something during an operation, you can check the buttons

and features by referring to the descriptions of the various screens in “Names of Things and

What They Do” (p. 8).

PR-80_e.book 6 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Other Notes

About the Hard Disk

The PR-80 uses a hard disk for saving video and storing the system. Hard disks do have a limited

lifetime, and thus are considered a consumable item. Depending on how the unit is handled, the hard

disk may reach the end of its service life sooner than expected. Please be sure to observe the following

points to prevent loss of your important creations.

• Back up your projects by using a removable hard disk (DV-HD Series).

• As much as possible, stop playback and keep access to the hard disk to a minimum whenever

playback of video images is not required.

• If the unit is moved frequently, save projects to an optional removable hard disk (DV-HD Series),

and transport the hard disk separately from the PR-80, in the box that it came in when

purchased.

For more information regarding the removable hard disk (DV-HD Series), read “About the

Removable Hard Disk” (p. 138).

About the Shortcut Keys

You can reconfigure the shortcut keys used for the PR-80’s keyboard shortcuts. Although this manual

explains the keyboard shortcuts that use the Ctrl key, if the shortcut keys have been changed by

means of the system environment settings (p. 41), you’ll need to substitute the names of the shortcut

keys you have set while reading these explanations.

About the DV-7DLC Templates

The DV-7DLC template included with this unit makes it easier to understand the functions assigned

to the buttons when the optional DV-7DLC is used with the PR-80. Remove the detachable sheet on

the back of the template and apply the template to the DV-7DLC control panel, then remove the

protective sheet from the template’s front surface.

PR-80_e.book 7 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Names of Things and What They Do

Front Panel

fig.frontpanel.eps

a. CD-ROM Drive and Eject Button

Used for loading data from CD-R/CD-RW disks

containing material created using computers and from

future upgrade CD-ROMs. Press the eject button to

open the disk tray.

b. Hard Disk Bay

The optional removable hard disk (DV-HD Series) is

inserted here. In addition to the internal hard disk, use

of the removable hard disk allows you to store projects

on dedicated disks, back up data, and manage your

data in the most suitable manner.

* You cannot make use of the internal hard disk and the

removable hard disk simultaneously on the same project.

* Always turn off the power to the PR-80 before inserting

or removing the removable hard disk.

* For a detailed explanation of how the removable hard disk

is installed, refer to “About the Removable Hard Disk”

(p. 138).

c. Mic Jack [MIC IN] and Level Knob

[LEVEL]

You can connect a microphone to the MIC IN jack

[MIC IN] and the LEVEL control [LEVEL and use it

with the Editor. With the Editor, you can perform post-

recording or record narration for the sequence you're

editing.

d. DV2 Connector

Digital video input/output. Connect DV devices here.

* The transition effects and output fader are not applied to

the digital video output.

e. USB Connector

Connect an optional remote controller (DV-7DLC),

MIDI interface (UM-1/UM-1S/UM-2/UM-4/UM-

550/UM-880), or a MIDI keyboard (PC-300/PCR-30/

PCR-50).

Connect devices here only when the PR-80’s power is

turned off. You can connect to either of the two

connectors. However, you cannot connect two remote

controllers simultaneously.

f. Headphone Jack [PHONES] and

Volume Knob [LEVEL]

Jack for connecting headphones and knob for

adjusting the headphone volume level.

g. Hard Disk Indicator

Lights when the hard disk is being accessed.

h. POWER Indicator

Lights when the PR-80’s power is on.

i. [POWER] Button

Button for turning on the power to the PR-80.

ihgf

b c

PR-80_e.book 8 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Rear Panel

fig.rearpanel.eps

a. AC Socket

Connect the included power cord here. The selector

switch on the right of this connector must be switched

to match the power supply voltage in the region where

the PR-80 is being used.

b. LAN Connector

Connect a networking cable here. For more detailed

information, refer to “Making the Network Settings”

(p. 113).

c. OUTPUT Jacks [OUTPUT:S-VIDEO,

VIDEO, BNC (COMPOSITE), and

AUDIO]

These are the video and audio output jacks. You use

them to connect such equipment as a television for

monitor use, video projector, power amp, and the like.

d. Input Connectors [INPUT: S-VIDEO,

VIDEO, AUDIO]

Connectors for input of video and audio signals. Use

for connecting video devices and other such

equipment.

e. Mouse Connector [MOUSE]

Use for connecting the included mouse. Make sure the

power to the PR-80 is turned off before connecting.

f. Keyboard Connector [KEYBOARD]

Use for connecting the keyboard. Make sure the power

to the PR-80 is turned off before connecting.

g. USB Connector

Connect an optional remote controller (DV-7DLC),

MIDI interface (SMPU-64/UM-1/UM-1S/UM-1X/

UM-1SX/UM-2/UM-2E/UM-2C/UM-4/UM-550/

UM-880), or a MIDI keyboard (PCR-30/PCR-50/PCR-

80/PC-300) here.

Connect devices here only when the PR-80’s power is

turned off. You can connect to either of the two

connectors. However, you cannot connect two remote

controllers simultaneously.

h. RS-232C Connector [RS-232C]

Use this connector to connect the PR-80 and a

computer and use the connection to exchange signals

between the two devices. For more detailed

information, refer to “Using the RS-232C Connector”

(p. 105).

* You can also use this to connect a touch panel display. In

this case, RS-232C commands cannot be used for control

functions. For more details, refer to “Using a Touch

Panel Display” (p. 105). For more on the touch panel

displays that can be used, contact your dealer.

i. Display Connector [DISPLAY OUT]

Connect the display here. Use an XGA-compatible

display (1024 x 768) equipped with a D-sub 15-pin

connector.

j. DV1 Connector [DV 1]

Digital video input and output connector. Connect

digital video devices here.

* The transition effects and output fader are not applied to

the digital video output.

aa b c d

gf h ie j

PR-80_e.book 9 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Setting Up and Connecting Equipment

Start by connecting the devices you will be using, such as video and audio devices used for output

and monitoring and the displays used for your operations. Whenever connecting devices, always be

sure to have the power turned off first. Connecting equipment with the power turned on may cause

malfunctioning and other problems.

The PR-80 comes with a DV (digital video) cable for use in connecting video devices equipped with

DV connectors to the PR-80’s DV connector. Use the included DV cable when connecting to the DV

connector. When connecting video tape recorders to the S-Video or video (composite) connectors, use

a commercially available video cable.

We recommend connecting to the S-Video connector if a VCR equipped with an S-Video connector

is to be connected to an analog connector. This provides higher quality video than that available with

the normal (composite) video connector.

fig.connection.eps

921

• To prevent malfunction and/or damage to speakers or other devices, always turn down the

volume, and turn off the power on all devices before making any connections.

Mouse

Keyboard

AC power outlet

Display for monitor/output

Video

Audio

S-Video connectorRCA pin connector

Display for operation

VGA cable

PR-80_e.book 10 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Instructions for Connecting Digital Video Devices Equipped with DV

Connectors

When connecting digital video devices equipped with DV connectors, use the included DV cable and

connect as shown in the following figure.

fig.connection.DV.eps

• Electromagnetic interference produced by using the PR-80 near a television or radio may cause

unevenness in the TV screen picture color or produce noise in the radio.

• If connecting to a computer's IEEE1394 connector (also called i.LINK or FireWire), be sure to use

a DV cable that is compatible with your computer.

Other device

(such as a video deck)

Front Panel

Rear panel

DV Input/Output

Connector

DV Input/Output

Connector

DV Input/Output

Connector

the included DV cable

PR-80_e.book 11 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Connecting to a Computer Over a Network

Connect using a LAN cable. Connecting to the computer over a network allows you to copy data from

the computer to the PR-80 and access a network time server to adjust the PR-80’s timing.

Whenever making these connections, always make sure that the power for all devices is turned off.

Connecting equipment with the power turned on may cause malfunctioning and other problems

fig.connection.LAN.eps

Rear panel

Router, hub, etc.

LAN cable

LAN Connector

ComputerComputer

LAN Connector

PR-80_e.book 12 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Examples of Using and Connecting the PR-80

Usage Examples

Presenting Video Performances on Stage

You can utilize the PR-80’s high-quality video and superb responsiveness to add the effects of video

to concerts and other stage events.

fig.stage.eps

Exhibits and Other Presentations

You can insert still images, video, narration, and other material as clips, with no need to make

changes to the material and with full freedom to play the clips at whatever point desired.

fig.presentation.eps

Projector

Video camera, etc.

PR-80

V-Synth

V-4

Projector

Power amplifier

PR-80

Speakers

DV-7DLC

PR-80_e.book 13 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Video at Facilities

It’s a breeze to set up a system that allows visitors to museums or individual booths at conventions

and the like to see and hear video and audio descriptions when they want. You can also use the

Scheduler to have video play automatically.

fig.equipment.eps

Display

PR-80

Power amplifier

Speakers

Power amplifier

Speakers

Power amplifier

Speakers

Touch panel

display

AR-3000

PR-80_e.book 14 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Connection Examples

Standalone Use

The PR-80 is controlled with the keyboard and mouse. For more detailed information, refer to

“Playing Back Clips” (p. 48).

fig.standalone.eps

Using the PR-80 with the Optional DV-7DLC

Using the DV-7DLC provides the kind of operability you can get only with a dedicated controller.

For more detailed information, refer to “Using a DV-7DLC” (p. 100).

fig.with.dv7c.eps

PR-80

Speakers

Power amplifier

Display for operation

Display

Keyboard

Mouse

PR-80

Speakers

Power amplifier

Display for operation

Display

Mouse

DV-7DLC

PR-80_e.book 15 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Using the PR-80 with MIDI

Using the optional UM-1 or other USB compatible (UM Series) MIDI interface enables you to control

MIDI devices with MIDI signals. Additionally, you can connect a V-LINK compatible device and use

the V-LINK feature to enjoy a variety of video effects that bring visual element of expression to your

performances.

For more detailed information, refer to “Using V-LINK” (p. 62) and “Using MIDI Devices” (p. 88).

fig.with.um1.eps

PR-80

UM-880

MIDI

USB

MIDI

PR-80

UM-1

V-Synth

Display

Mouse

PR-80_e.book 16 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

You can use a MIDI keyboard to control the switching of effects with retrigger playback and velocity,

control the playback speed, and produce other advanced playback effects intuitively.

fig.with.midikey.eps

You can also use an optional PCR-50 or other USB keyboard (PCR Series or PC-300), connecting the

keyboard directly to the PR-80 with no MIDI interface necessary.

fig.with.pc300.eps

PR-80

Display for operation

UM-1

Projector

Keyboard

Mouse

V-Synth

PR-80

Display for operation

PCR-50

USB

Projector

Keyboard

Mouse

PR-80_e.book 17 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Using the RS-232C Connector

Connecting with the RS-232C cable allows you to control the PR-80 with a computer or other external

control device. For more detailed information, refer to “Using the RS-232C Connector” (p. 105).

fig.with.pc.eps

Using a Touch Panel Display

You can connect a touch panel display using an RS-232C cable and VGA cable and then control the

PR-80 by directly touching the touch panel display screen. For more detailed information about

setting up touch panel displays, refer to “Using a Touch Panel Display” (p. 105).

fig.with.panel.eps

PR-80

Speakers

Power amplifier

Projector

PR-80

RS-232C

VGA

Speakers

Power amplifier

Touch panel

display

Display

PR-80_e.book 18 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Controlling AR Series Devices

You can use the PR-80 for MIDI control of the AR-3000 and other models in Roland’s AR (Audio

Recorder) Series. This allows you to switch playback of AR Series phrases by switching clips with the

PR-80.

For more details about setting up the PR-80 to control AR Series devices, refer to “Controlling AR

Series Devices” (p. 110).

fig.with.AR.eps

Power amplifier

Speakers

Power amplifier

Speakers

Power amplifier

Speakers

PR-80

UM-880

USB

MIDI

AR-3000

Projector

Display for operation

Keyboard

Mouse

PR-80_e.book 19 ページ２００５年１月６日　木曜日　午後９時２２分

Before Using the PR-80

Controlling Multiple Presenters

You can control multiple other Presenters (such as other PR-80s, PR-50s or DV-7PRs) with the PR-50.

You can make settings for starting and stopping playback of clips, selecting palettes and clips, and

setting switch effect times.

For more details about setting the PR-80 to control other Presenters, refer to “Controlling Another

Presenter” (p. 106).

fig.with.DV-7PR.eps

PR-80

Display for operation

UM-880

USB

MIDI

PR-80

DV-7PR

UM-1

Projector

Keyboard

Mouse

PR-80_e.book 20 ページ２００５年１月６日　木曜日　午後９時２２分

Page is loading ...

Edirol PR-80 Owner's manual

Brand: Edirol

Model: PR-80

Category: Musical Instruments

Type: Owner's manual

Download PDF

report

Edirol PR-80 Owner's manual

Edirol PR-80 Owner's manual

Related papers

Other documents