Fender Bassman 215 Owner's manual

Brand: Fender

Model: Bassman 215

Category: Loudspeakers

Type: Owner's manual

This manual is also suitable for

Bassman 215 (2002-2004)

Fender Bassman 215 (2002-2004) is a bass speaker enclosure constructed from durable 3/4” (1.9 cm) 7-ply Birch Maple Plywood, capable of handling up to 300 Watts of power. It features two 15” (38.1cm) speakers with 56 oz (1.6 kg) magnets that deliver a rich and powerful bass sound. The cabinet's parallel wired 1/4” high current input jacks allow for easy daisy-chaining of multiple enclosures, providing additional output for larger venues.

Fender Bassman 215 (2002-2004) is a bass speaker enclosure constructed from durable 3/4” (1.9 cm) 7-ply Birch Maple Plywood, capable of handling up to 300 Watts of power. It features two 15” (38.1cm) speakers with 56 oz (1.6 kg) magnets that deliver a rich and powerful bass sound. The cabinet's parallel wired 1/4” high current input jacks allow for easy daisy-chaining of multiple enclosures, providing additional output for larger venues.

Your new Fender

®

Bassman

®

215 Bass speaker enclosure is constructed

from 3/4” (1.9 cm) 7-ply Birch Maple Plywood and is capable of handling up

to 300 Watts of power. The Bassman 215 features two 15” (38.1cm)

speakers with 56 oz (1.6 kg) magnets and is designed for use with the

Fender 1200S, the Fender 300T or any other professional quality bass

amplifier. In order to more fully understand the operational characteristics of

your Bassman 215 Bass speaker enclosure, please read through all

instructions and heed all caution and safety warnings on both your amplifier

and Fender Bassman 215 Bass speaker enclosure.

CONNECTING MUL

TIPLE 215 BASS SPEAKER ENCLOSURES

Because the Bassman 215 Bass Speaker Enclosure’s jacks are wired in

parallel, multiple 215 cabinets can be “daisy chained” together providing

additional output for larger venues. To do so, simply connect them with

standard 1/4” plug speaker cable (16 gauge or heavier) as shown below.

Note: If using a tube amplifier, your tube amp could fall into protect mode or

even be damaged by using an improper impedance load. Therefore, it is

important to heed all caution and safety warnings on both your amplifier and

Bassman 215 Bass speaker enclosure.

SPECIFICATIONS

PART NUMBER 021-1674-010

DRIVERS Two 15 “ (38.1 cm) Steel Frame Woofers

2.5” (6.4 cm) voice coils

56 ounce (1.6 kg) magnets

CABINET 3/4 “ (1.9 cm) 7-ply Birch Maple Plywood

SENSITIVITY 96 dB, 1 Watt - 1 Meter

POWER HANDLING 300 Watts

IMPEDANCE 8Ω

CONNECTIONS Dual, Parallel Wired, 1/4” High Current Input

Jacks

ENCLOSURE VOLUME VB = 7.3 ft

3

(2.66 m

3

)

DIMENSIONS

Height: 41” (104 cm)

Width: 25.5” (65 cm)

Depth: 17” (43.2 cm)

WEIGHT 93 lbs. (42.2 kg)

Pr

oduct specifications subject to change without notice

A PRODUCT OF:

FENDER MUSICAL INSTRUMENTS CORP

.

CORONA, CA USA

Bassman

®

and Fender

®

are registered trademarks of FMIC

THE SUNN

®

215 BASS SPEAKER ENCLOSURE

P/N 057679 REV A

THE FENDER

®

BASSMAN

®

215 BASS SPEAKER ENCLOSURE

1

Fender Bassman 215 Owner's manual

Brand: Fender

Model: Bassman 215

Category: Loudspeakers

Type: Owner's manual

This manual is also suitable for

Bassman 215 (2002-2004)

Fender Bassman 215 (2002-2004) is a bass speaker enclosure constructed from durable 3/4” (1.9 cm) 7-ply Birch Maple Plywood, capable of handling up to 300 Watts of power. It features two 15” (38.1cm) speakers with 56 oz (1.6 kg) magnets that deliver a rich and powerful bass sound. The cabinet's parallel wired 1/4” high current input jacks allow for easy daisy-chaining of multiple enclosures, providing additional output for larger venues.

Download PDF

Related papers

Other documents