Box-Design DAC Box DS Product information

Category
Musical Equipment
Type
Product information

Box-Design DAC Box DS is a high-end digital-to-analog converter that can connect to digital sound sources using optical and coaxial inputs. It also acts as a USB audio interface for computers and supports 24/192kHz HD music data in fully asynchronous mode.

The DAC Box DS incorporates the PCM 1792 DAC chip, which is usually only found in very expensive high-end designs. It has two different filter settings (steep & optimum phase) for selecting your favorite sound preference. The whole audio circuitry design is ultra linear with low output impedance to avoid any negative interference with cables or pre-amps.

Box-Design DAC Box DS is a high-end digital-to-analog converter that can connect to digital sound sources using optical and coaxial inputs. It also acts as a USB audio interface for computers and supports 24/192kHz HD music data in fully asynchronous mode.

The DAC Box DS incorporates the PCM 1792 DAC chip, which is usually only found in very expensive high-end designs. It has two different filter settings (steep & optimum phase) for selecting your favorite sound preference. The whole audio circuitry design is ultra linear with low output impedance to avoid any negative interference with cables or pre-amps.

product information
07. 2013
Update: DZ Datum 08.07.2013
DAC Box DS
High-End Digital/Analogue Converter with USB 2.0
 Top grade PCM-1792 D/A chip from Texas Instruments
 3 Inputs: 1x USB, 1x optical (Toslink), 1 x coax (S/PDIF)
 24bit/192kHz asynchronous USB streaming
 8 times oversampling
 2 selectable filter settings
 Ultra linear circuitry
 Extremely low impedance output stage
 Gold-plated RCA line level output sockets

New stylish DS-design
 Faceplate in silver or black
D/A-converter Texas Instruments PCM-1792
8 x Oversampling design
Sampling rates (coax, USB) 32/44,1/48/88,2/96/176,2/192 kHz,
Sampling rates (optical) 8/16/32/44,1/48/88,2/96 kHz
Selectable filter settings „steep“ & „optimum phase“
Digital inputs 1 x coax (S/PDIF)
1 x optical (Toslink®)
1 x USB B
Analogue out 1 pair RCA/Cinch
Output voltage max 2 Veff
THD < 0,01%
Power consumption < 1 watt standby, 350mA max
Power supply 18V/500mA DC; 220 - 240V, 50Hz
Dimensions W x H x D 103 x 72 x 144 (163) mm (incl. sockets)
Weight 1010g without power supply
PRO-JECT AUDIO SYSTEMS
a division of AUDIO TUNING GmbH
1050 Wien, Margaretenstraße 98,
Retail price
399,00 €
DAC Box DS - a real state of the art audio product!
The advanced DAC Box DS is not only an excellent D/A converter for digital sound sources using optical and coaxial inputs, but also acts as a superi-
or USB audio interface for demanding computer audio. USB Audio supports 24/192kHz HD music data in fully asynchronous mode.
DAC Box DS incorporates the best in audio grade DAC chips, PCM 1792, which usually only can be found in very expensive high-end designs. For
the engaged audiophile we provide two different filter settings (steep & optimum phase) for selection of your favourite sound preference. The whole
audio circuitry design is ultra linear with low output impedance to avoid any negative interference with cables or pre-amps.
The big display does show selected input, incoming bit depth, filter settings and sampling frequency.
Its class-leading audio performance makes DAC Box DS a outstanding low-cost high-end bargain!
Back view
 RCA Stereo
 Digital Inputs
 Optical
 S/PDIF
 USB
 Power
Black version
  • Page 1 1

Box-Design DAC Box DS Product information

Category
Musical Equipment
Type
Product information

Box-Design DAC Box DS is a high-end digital-to-analog converter that can connect to digital sound sources using optical and coaxial inputs. It also acts as a USB audio interface for computers and supports 24/192kHz HD music data in fully asynchronous mode.

The DAC Box DS incorporates the PCM 1792 DAC chip, which is usually only found in very expensive high-end designs. It has two different filter settings (steep & optimum phase) for selecting your favorite sound preference. The whole audio circuitry design is ultra linear with low output impedance to avoid any negative interference with cables or pre-amps.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI