2) Adjust the Chest Pack:
a. Move the Plastic Sliders along the Neck Straps and Side Straps until
they are the desired length (see Figure C).
b. Confirm that the chest pack is held securely against your body. The
Chest Pack should fit comfortably but not move or shift.
3) Insert the pump into the Pump Pocket:
a. Place the pump into the Pump Pocket horizontally on your chest with
the screen on your left side and facing out (see Figure D).
b. Using the Pull Tab, confirm that both the display and the keypad are
visible through the Clear Plastic Window.
c. Route the tubing to exit through the Gray Zipper Opening on the top of
the Pump Pocket.
d. Push the tube firmly into the right or left tube clip. Make sure the tubing
is not kinked.
Figure C
Figure D