Zest 4 Leisure Hawaiian Table Assembly Instructions

Assembly Instructions

(W x D x H): 0.60m x 0.60m x 1.11m

Product Name: Hawaiian Table

Pressure Treated products should not be treated with any other products for the first month.

PLEASE KEEP THIS INSTRUCTION

Zest4Leisure

01352 752555 option 1 –sales@zest4leisure.co.uk

V2-02.16

Hawaiian Table Assembly Instructions

Requires 2 person assembly.

Tools required: Corded / Cordless Drill, Hex Bit / Screwdriver, 3mm Drill Bit required

in order for you to drill all screw holes before construction.

The colour version of this document can be downloaded from:

www.zest4leisure.co.uk/downloads/category/C1

Hawaiian Table Pack List

Item Description Quantity

ABrace 4

BLeg Assembly 2

CStool Seat 1

Fixings

90mm Hex Screws 8

90mm Screws 4

www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.

Assembly requires 2 persons.

Tools required: Corded/Cordless Drill, Hex Bit/Screwdriver, 3mm Drill Bit

required in order for you to drill all screw holes before construction.

Hawaiian Table is now complete.

1. Attach 4no Braces A to Leg Assembly B using 4no 90mm Hex Screws (1no per

Brace) as shown in Figs.1a & 1b.

2. Attach the remaining Leg Assembly B to the other end of Braces A using 4no

90mm Hex Screws (1no per Brace A) as shown in Fig.2.

3. Place Legs Assembly onto Stool Seat C and fix in position using 4no 90mm

Screws – Fig.3.

1a 1b