Palstar products are designed by
Hams for Hams carrying on the
Palstar tradition for high-quality
products designed and
manufactured in Ohio, USA.
9676 N. Looney Rd,
Piqua, OH 45356 USA
(937) 773-6255
(800) 773-7931
(937) 773-8003 (Fax)
www.palstar.com
PALSTAR
SP30A Audiophile
Communication Speaker
Designed and Manufactured in the USA
Copyright 2018 Palstar, Inc.
PALSTAR
SP30A Audiophile Speaker
Designed and Manufactured in the USA
15 Watts nom. power handling @ 4 Ohms, 30 Watts Peak
Hand-made Cherry wood or Black 9-ply birch cabinet
Multi-form cone design for improved vocal clarity
Driver Frequency range of: 75 Hz to 6 kHz
7” wide x 5.5” high x 7.25” deep
18 mm dia. Alu-copper speaker coil
The SP30A audiophile features the Alpair 6M Gold speaker driver
that is particularly suited for communication uses. The bass-rich
warm tone of the driver complements the sound of the human
voice. The SP30AP audiophile features the new generation 2 model
of the Alpair 6 heritage.
IMPORTANT:
1. For the FIRST 30 HOURS use very low volume. Hours 30 to 100,
gradually increase the volume, but remain conservative. From
100 to 300 hours gradually transition into normative use, and
if listening to music, include some bass.
2. Always remain conservative, gentle, and sensible when using
this speaker and it will continue to yield pleasing acoustic results.
General Care:
Keep the driver away from direct sun-light as the UV will break
down the cone structure. Very high humidity could aect the
stability of the cone. Don’t use any wet cloths or very damp
materials to clean the cone. A light gentle brush with a soft
duster is sucent.
Inputs: Gold-plated binding posts, 3.5 mm jack
Speaker driver/total weight: 1.80 lbs/3.75 lbs
/
