2. Fastcap
  3. Fast Cap Chopshop Saw Hood Mounting Brackets for Tile Saws, 2-Pc. Set

Fastcap Fast Cap Chopshop Saw Hood Mounting Brackets for Tile Saws, 2-Pc. Set Owner's manual

  • Hello! I've reviewed the provided instructions for the Mounting Bracket for Tile saw. The document outlines a simple, five-step process for mounting the bracket, including loosening the knob, placing the bracket, tightening the knob, adjusting the mounting hole, and inserting the saw hood. I'm ready to answer any questions you have about this process or the device described.
  • What is the first step in mounting the bracket?
    Where should the mounting bracket be placed?
    What is the last step after tightening the knob and adjusting the mounting hole?
1
5
4
2
3
Loosen knob.
Tighten knob so that mounting bracket
is fixed in place.
Place Saw Hood into mounting bracket.
Place mounting bracket to fit around the
metal bar on wet saw / stand.
Once mounting bracket is secure in place,
adjust the mounting hole to desired
position.
Mounting Bracket for Tile saw
Instructions
/