®
SPECIAL INSTRUCTIONS
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
Trim the slots in the
gasket as needed.
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0230
®
SPECIAL INSTRUCTIONS
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
Trim the slots in the
gasket as needed.
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0230
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Edelbrock 14771477 Operating instructions
-
-
Edelbrock Performer 1412 Installation guide
-
Edelbrock Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR) Installation guide
-
-
-
Edelbrock 7101 Installation guide
-
-
-