2. Edelbrock
  3. 1472

Edelbrock 1472 User manual

  • Hello! I've reviewed the instructions for Edelbrock Air-Horn Gaskets, specifically for the Performer Series models 1472, 1477, and 1499. This document outlines how to trim the gasket slots for a proper fit, especially with carburetors that have cast-in baffles. I'm here to help you understand these instructions and answer any questions you might have about the installation process.
  • What should I do with gasket slots?
    What if my carburetor has cast-in baffles?
    Which carburetors this instruction is for?
®
SPECIAL INSTRUCTIONS
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
Trim the slots in the
gasket as needed.
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0230
®
SPECIAL INSTRUCTIONS
For Air-Horn Gaskets for Performer Series Carburetors
Supplement for Catalog #1472, 1477, & 1499
Trim the slots in the
gasket as needed.
NOTE: Some carburetor tops have cast-in baffles near the slots in the gasket,
as shown in the figure to the left. If this is the case with your carburetor, the
gasket may need to be trimmed to properly fit over the baffles. Trim the
gasket as shown.
Catalog #1472, 1477, 1499
Rev. 12/06 - RS/mc
©2006 Edelbrock Corporation
Brochure #63-0230
/