2. Edelbrock
  3. 14811481

Edelbrock 14811481 Operating instructions

  • Hello! I've reviewed the Edelbrock Throttle Lever Adapter Kit 1481 Installation Instructions. This document provides guidance on connecting Chrysler throttle linkages to Edelbrock Performer Series Carburetors using the included adapter kit. I am ready to answer your questions about the installation process or the kit's components.
  • What throttle linkages does this adapter kit work with?
    What is included in the kit?
    When should I attach the throttle lever adapter?
Catalog #1481
Brochure #63-0329
©2009 Edelbrock Corp.
Rev. 1/09 - AJ/mc
Chrysler Throttle Lever Adapter Kit
Catalog # 1481
INSTALLATION INSTRUCTIONS
®
PLEASE study these instructions carefully before installing your new Chrysler Throttle Adapter Lever Kit. If you have any questions, do not hesitate to contact our
Technical Hotline at: 1-800-416-8628, from 7am-5pm Monday-Friday, Pacific Standard Time or via e-mail at: [email protected].
The part #1481 Chrysler Adapter Lever Kit will allow you to connect Chrysler throttle linkages to the
Edelbrock Performer Series Carburetor.
INSTALLATION OF ADAPTER
A. Follow the
PERFORMER SERIES CARBURETOR INSTALLATION INSTRUCTIONS
included with the carburetor. During step 1 of the
“PREPARATION OF
CARBURETOR FOR INSTALLATION”
section, you should attach the Throttle
Lever Adapter to the existing throttle lever using the appropriate bolts,
lockwashers, and nuts making sure the adapter is secured properly.
B. Continue to install the carburetor using the
PERFORMER SERIES
CARBURETOR INSTALLATION INSTRUCTIONS.
10-32 Bolt,
Lockwasher & Nut
Throttle Lever
Adapter
Throttle Lever
1/4-20 Bolt,
Lockwasher &Nut
KIT CONTENTS
❑1 Throttle Lever Adapter ❑1 1/4-20 Bolt
❑1 10-32 Bolt ❑1 1/4-20 Nut
❑1 10-32 Nut ❑1 1/4 Lockwasher
❑1 10-32 Lockwasher
Edelbrock Corporation 2700 California Street Torrance, CA 90503
Toll-Free Tech Line: 800-416-8628
Office: 310-781-2222
Tech E-Mail: [email protected]
Catalog #1481
Brochure #63-0329
©2009 Edelbrock Corp.
Rev. 1/09 - AJ/mc
Chrysler Throttle Lever Adapter Kit
Catalog # 1481
INSTALLATION INSTRUCTIONS
®
PLEASE study these instructions carefully before installing your new Chrysler Throttle Adapter Lever Kit. If you have any questions, do not hesitate to contact our
Technical Hotline at: 1-800-416-8628, from 7am-5pm Monday-Friday, Pacific Standard Time or via e-mail at: [email protected].
The part #1481 Chrysler Adapter Lever Kit will allow you to connect Chrysler throttle linkages to the
Edelbrock Performer Series Carburetor.
INSTALLATION OF ADAPTER
A. Follow the
PERFORMER SERIES CARBURETOR INSTALLATION INSTRUCTIONS
included with the carburetor. During step 1 of the
“PREPARATION OF
CARBURETOR FOR INSTALLATION”
section, you should attach the Throttle
Lever Adapter to the existing throttle lever using the appropriate bolts,
lockwashers, and nuts making sure the adapter is secured properly.
B. Continue to install the carburetor using the
PERFORMER SERIES
CARBURETOR INSTALLATION INSTRUCTIONS.
10-32 Bolt,
Lockwasher & Nut
Throttle Lever
Adapter
Throttle Lever
1/4-20 Bolt,
Lockwasher &Nut
KIT CONTENTS
❑1 Throttle Lever Adapter ❑1 1/4-20 Bolt
❑1 10-32 Bolt ❑1 1/4-20 Nut
❑1 10-32 Nut ❑1 1/4 Lockwasher
❑1 10-32 Lockwasher
Edelbrock Corporation 2700 California Street Torrance, CA 90503
Toll-Free Tech Line: 800-416-8628
Office: 310-781-2222
Tech E-Mail: [email protected]
/