Canvas Laurel Wall Owner's manual

Brand: Canvas

Model: Laurel Wall

Type: Owner's manual

ASSEMBLY INSTRUCTIONS

HAVING TROUBLE?

TOLL-FREE:

1-888-670-6684

IMPORTANT: Please read this manual carefully

before beginning assembly of this product.

Keep this manual for future reference.

LAUREL

WALL SCONCE

PRODUCT NO. 152-2621-8

We believe in the power of décor and its

ability to make up the fabric of your home.

That’s why CANVASTM collections draw

inspiration from Canadians and the way

they live.

From on-trend furniture pieces to holiday

décor and all your outdoor living essentials,

CANVASTM makes it easy to refresh your space

to reect your unique style and the way you

live every day.

We would love to hear from you and welcome

your thoughtful feedback. Visit our website

at canadiantire.ca to tell us about your

experience, and share your photos with us

using #myCANVASstyle.

Show us how you bring CANVASTM products

to life. We can’t wait to see!

LAUREL WALL SCONCE 3

TABLE OF CONTENTS

Important Safety Instructions 3

Parts List 4

Before You Begin Assembly 6

Electrical Installation 7

Exploded Parts 8

Step-by-step Guide 9

Technical Data 15

Troubleshooting 16

Caring for Your Item 16

Warranty 17

IMPORTANT SAFETY INSTRUCTIONS!

PLUG-IN: READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS

BEFORE INSTALLING FIXTURE.

1. This portable lamp has a polarized plug (one blade is wider than the

other) as a safety feature to reduce the risk of electric shock.

2. This plug will t in a polarized outlet only one way. If the plug does not t fully

in the outlet, reverse the plug. If it still does not t, contact a qualied

electrician.

3. Never use with an extension cord unless the plug can be fully inserted.

4. Do not alter the plug.

WARNING! CONSULT A QUALIFIED ELECTRICIAN TO

ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.

IMPORTANT SAFETY INSTRUCTIONS!

HARDWIRE: READ INSTRUCTIONS AND REVIEW ALL DIAGRAMS

BEFORE INSTALLING FIXTURE.

1. All electrical connections must be in accordance with local codes,

ordinances and the Canadian Electrical Code.

2. These xtures should be mounted on an electrical outlet box. The box must be

directly supported by the building stucture.

3. Turn off the circuit breaker or remove the appropriate fuse to disconnect

power source before installing xture.

4. Turning the light switch off to cut the power is not sufcient to prevent electric

shock. When in doubt about the safety of any electrical installation or repair,

consult a qualied electrician.

CLEANING: Before cleaning your xture, turn off the switch or power source.

Wipe the xture with a soft, damp cloth.

IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.

LAUREL WALL SCONCE

ITEM DESCRIPTION THUMBNAIL QUANTITY

1 Fixture 1

2 Shade 1

3 Socket ring 1

PARTS LIST

TOOLS REQUIRED

No. 2 Cross-head Screwdriver

Tip Shown Actual Size

NOTE: Do not over drill.

Be aware of over-drilling.

LAUREL WALL SCONCE 5

C Mounting strip 1

HARDWARE LIST

ITEM DESCRIPTION THUMBNAIL QUANTITY

A Outlet box screw 2

B Wire connector 3

F Mounting wall screw 2

D Canopy screw 2

G Backplate 1

E Wall anchor 2

H 1

Dimmable E26 medium

base bulb 60 W max.

(sold separately)

I Nut 1

LAUREL WALL SCONCE

BEFORE YOU BEGIN ASSEMBLY

MAKE SURE ALL PARTS ARE PRESENT

Compare all pieces to the parts and hardware lists, and

make sure you have all tools required for assembly.

REMOVE PACKAGING MATERIALS

Place packing materials back in the box. Do not dispose of

packaging materials until assembly is complete.

READ EACH STEP CAREFULLY

Make sure you understand each step. For any questions, contact

CANVAS™ customer service at 1-888-670-6684 (toll-free).

ASSEMBLE IN A CLEARED AREA

Place all parts from the box on the oor in front of you on a clean,

dry, level surface to protect the product as it is being built.

LAUREL WALL SCONCE 7

ELECTRICAL INSTALLATION

STEP 1

STEP 2

Place the wall switch in the “OFF” position.

Depending on which type of fuse box you have in your home:

• Place either the main (Master) switch in

the “OFF” position, cutting off power

to your entire home, OR turn off the

individual switch that provides power to

where the xture will be installed.

• Place either the main (Master) switch in

the “OFF” position, cutting off power to

the entire home, OR unscrew the fuse

that provides power to where the xture

will be installed.

NOTE: Shutting off a wall switch that

controls the light is not sufcient to

prevent electric shock.

WARNING! CONSULT A QUALIFIED ELECTRICIAN TO

ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.

LAUREL WALL SCONCE

EXPLODED PARTS

Dimmable E26 medium

base bulb 60 W max.

(sold separately)

LAUREL WALL SCONCE 9

STEP 1

STEP-BY-STEP GUIDE — HARDWARE

Remove the backplate G by unscrewing the canopy screws D.

Remove the wire connectors B. Separate the wires from the cord, and gently pull

on the cord to slide it out of the backplate G to remove it.

1X1 BX3 GX1

DX2

LAUREL WALL SCONCE

STEP 2

STEP-BY-STEP GUIDE — HARDWIRE

Attach the white wire from the house to the white wire from the xture 1 using

one of the included wire connectors B.

Then, attach the black wire from the house to the black wire from the xture 1

the same way. Finally, attach the green ground wire (or bare copper wire) from

the house to the bare wire from the xture 1.

Position the mounting strip C over the outlet box and secure it with the outlet

box screws A.

AX2

1X1 BX3 CX1

LAUREL WALL SCONCE 11

1X1

STEP-BY-STEP GUIDE — HARDWIRE

STEP 3

Position the xture 1 in place, making sure all wires are secure inside the

junction box.

Place the canopy screws D to secure the canopy of the xture 1 to the

mounting strip C.

Insert nut I into the canopy.

CX1 DX2

WARNING:

Ensure no exposed wires

once all wiring is complete.

IX1

LAUREL WALL SCONCE

1X1

STEP-BY-STEP GUIDE — HARDWIRE

STEP 4

Secure the shade 2 to the xture 1 using the socket ring 3.

Screw 1 dimmable medium base (E26), 60W max. bulb H into the

socket of the xture 1.

3X1 HX1

2X1

WARNING:

Do not over-tighten socket

ring.

LAUREL WALL SCONCE 13

STEP 1

STEP-BY-STEP GUIDE — PLUG-IN

Mark the location for wall anchors E 2 3/4” (7 cm) apart. Use a 6 mm drill

(not included) to make the holes.

Insert the wall anchors E into the wall. Screw the mounting wall screws

F into the anchors E.

Align the backplate of the xture 1 with the mounting wall screws F and

press so that the screws are xed in the backplate of the xture 1. Slide

down the xture 1 to lock it in place.

EX2

1X1 FX2

WARNING:

Ensure no exposed wires

once all wiring is complete.

LAUREL WALL SCONCE

STEP 2

STEP-BY-STEP GUIDE — PLUG-IN

1X1

Secure the shade 2 to the xture 1 using the socket ring 3.

Screw 1 dimmable medium base (E26), 60 W max. bulb H into the

socket of the xture 1.

3X1 HX1

2X1

On/off rotary switch

LAUREL WALL SCONCE 15

TECHNICAL DATA

13"

(33 cm)

12 1/4"

(31.1 cm)

SPECIFICATIONS

ASSEMBLED DIMENSIONS (LxWxH) 13 x 7 5/8 x 12 1/4"

33 x 19.4 x 31.1 cm

CORD LENGTH 6'

1.83 m

ASSEMBLED WEIGHT 2 lb 1 oz

0.94 kg

7 5/8"

(19.4 cm)

LAUREL WALL SCONCE

CARING FOR YOUR ITEM

PRODUCT TROUBLESHOOTING

CALL US;

WE CAN HELP

BEFORE

RETURNING

YOUR PRODUCT

If you have questions regarding your product or require

warranty assistance, please call our customer service helpline.

TOLL-FREE:

1-888-670-6684

HAVING TROUBLE?

LET US HELP YOU!

PROBLEM POSSIBLE CAUSES SOLUTION

The light does

not turn on.

The light does

not turn on.

The light does

not turn on.

Wall switch or circuit

breaker is off.

Turn on the switch or

circuit breaker.

Replace the light bulb.

Tighten the light bulb in

the socket.

Light bulb my be dead. Test light

bulb in known working xture.

Light bulb is loose.

1Disconnect xture’s plug from wall receptacle.

2To clean the xture, use a dry or slightly dampened clean cloth (use clean water,

never a solvent) to wipe the glass and surface of the xture.

3Do not use any cleaners with chemicals, solvents or harsh abrasives.

4If necessary, use a mild soap to clean off any dirt or stains.

TROUBLESHOOTING

Light will

not turn on.

Light will

not turn on.

Consult a certied

professional electrician.

Consult a certied

professional electrician.

Bad main supply wiring.

Defective switch.

WARRANTY

This CANVASTM product carries a one (1) year warranty against defects in workmanship and

materials. Trileaf Distribution agrees to replace the defective product free of charge within the

stated warranty period, when returned by the original purchaser with proof of purchase. This

product is not guaranteed against wear or breakage due to misuse and/or abuse.

Made in China

Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

PRODUCT NO. 152-2621-8

LAUREL WALL SCONCE 17

LAUREL

INSTRUCTIONS D’ASSEMBLAGE

VOUS RENCONTREZ DES PROBLÈMES?

NUMÉRO SANS FRAIS :

1 888 670-6684

IMPORTANT: Veuillez lire attentivement ce guide avant de

procéder avec l’assemblage de ce produit. Conservez ce guide

aux ns de consultation ultérieure.

APPLIQUE MURALE

N° D’ARTICLE : 152-2621-8

Nous croyons au pouvoir de la décoration

pour donner son âme à votre maison.

C’est pour cela que les collections CANVASMC

s’inspirent des Canadiens et de leur style de

vie.

Qu’il s’agisse de meubles tendance, de

décorations pour les fêtes ou pour le plein

air, CANVASMC vous permet de rafraîchir

facilement votre espace pour qu’il reète

votre style unique et votre mode de vie.

Nous serions ravis de recevoir vos

commentaires judicieux. Visitez notre site Web

à canadiantire.ca pour nous communiquer de

votre expérience et partagez vos photos avec

nous en utilisant #mycanvasstyle.

Montrez-nous comment vous donnez vie aux

produits CANVASMC. Nous avons hâte de les

voir!

D’INSPIRATION CANADIENNE

Page is loading ...

Canvas Laurel Wall Owner's manual

Brand: Canvas

Model: Laurel Wall

Type: Owner's manual

Download PDF

report

in other languages

français: Canvas Laurel Wall Le manuel du propriétaire

Canvas Laurel Wall Owner's manual

Canvas Laurel Wall Owner's manual

in other languages

Related papers

Other documents