Glensound GDC 6432 dCU/3 User guide

About dCUconfig:

This is an application that lets users tell the CCU unit which of the Mic channels gain and

phantom power values in the CU must be remembered.

Installation guide:

Click on the setup.exe file under dCUconfig folder must create a icon called dCUconfig in

programs once when you click on it you see the

Select any folder of your choice and click ok you will see the application as shown bellow

Now for any of the channels in show column you want to remember the gain and the

phantom power values for that channel. Select the appropriate channel and tick mark on

Mic gains under Recall section. And click Save

For example:

I have selected Channel3 and ticked on Mic gains which means I would want to remember

the gains and the phantom for channel3.

Once this is done you will see a file called settings.ccu in the folder that you selected for

config files drag that file and drop it in the \config\01\ folder this folder is visible to you in

drive GDC-6432 only when you connect the CCU panel to your computer via USB cable. Once

this is done power off wait for 5 seconds and power on the CCU panel.

This manual is also suitable for