2. Sunco Lighting
  3. SAL06P-LA-K 1X4 Selectable Ceiling Panel

Sunco Lighting SAL06P-LA-K 1X4 Selectable Ceiling Panel Operating instructions

  • Hello! I have analyzed the Dimmer Compatibility Guide for the Sunco 1X4 Selectable Ceiling Panel. This document provides a list of tested dimmer models from brands like Eaton, Lutron, and Leviton that are compatible with the ceiling panel. The guide also gives guidance on resolving pop-on behavior with some dimmers. I'm ready to answer your questions about the information provided in the document.
  • What type of dimmer is recommended?
    What does buzzing or flickering indicate?
    What is 'pop-on' behavior?
    How to resolve the 'pop-on' issue?
BRAND MODEL
EATON SALPLAK
AALC
LUTRON PPKGWWHR
MACLMHWH
TGCLPHWH
CTCLPDHWH
DVCLPRWH
LEVITON RIPLM
RLW
RPOW
We highly recommend using a ELV (electronic low voltage) dimmer compatible with LED lights. Buzzing or flickering is typically an indication
that the dimmer and lights used are not compatible. Please consult dimmer manufacturer for maximum wattage capacity.
*May experience “pop-on” behavior, in which lights cannot be turned on immediately to their minimum level. To resolve this issue, first raise the
slider switch above the minimum level to turn the lights on, then dim to a lower light level as needed.
This compatibility list is based on testing conducted by the
manufacturer in a lab simulated environment. Actual results may vary.
Dimmer Compatibility Guide
1X4 SELECTABLE
CEILING PANEL
/