2. ROOMS TO GO
  3. 12409288

ROOMS TO GO 12409288 Assembly Instructions

  • I have reviewed the assembly instructions for the 928-32 Ottoman. This document details the hardware and tools needed for assembly, including the location of the hardware and how to attach the legs. I'm ready to answer any questions you have about the assembly process.
  • Where is the hardware located?
    What tools are needed for assembly?
    How should the legs be aligned?
SKU #
Thread Qty
13 8
4
Unit Type OTTOMAN SKU(s)# 12409288
Version # 1Date: Page 1
OTTOMAN
12409288
Manufactured by ALBI for Rooms To Go
TRIANGLE PLASTIC LEGS
7"W x 7"W x 7" x 2"H
Hardware
Size
HEX HEAD WOOD SCREWS
1/8"W x 2"L
8/30/2023
The legs should be evenly aligned on each bottom corner of the unit, approximately 1/4" - 3/8 " from the edge. Place 2 screws, one in
each of the screw holes. Secure the legs to the frame using a hex-head screwdriver bit and a power drill. Do not over tighten screws.
Assembly Tools needed, but not included -
Hex-Head screwdriver bit, and power drill.
Hardware can be located in the zippered compartment, on the bottom side of the unit.
Assembly Instructions
928-32
/