2. ROOMS TO GO
  3. 74500301

ROOMS TO GO 74500301 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the LOGEN Dining Arm Chair, model 74500301. This document provides a detailed breakdown of all parts and hardware, along with step-by-step guidelines to assemble the chair. I'm ready to answer any questions you have about the assembly process or the included components.
  • What is included in the hardware pack?
    Where is the hardware pack located?
    What are the main parts of the chair?
SUNNY
LOGEN DINING ARM CHAIR
SYPR
A
B
BACK PANEL
RIGHT CHAIR LEG
C LEFT CHAIR LEG
1AA BOLT M6 x 20mm 2
DD WASHER M6 12
EE ALLEN KEY 1
1
1
D SEAT PANEL 1
74500301
Bottom of the back panel and
seat panel.
LOGEN DINING ARM CHAIR, 74500301
FF CAP M6 12
BB BOLT M6 x 40mm 6
CC BOLT M6 x 50mm 4
A
D
B
C
1
this
Attach the right (B) and left (C) chair leg to the back panel (A) with bolts and washers
Attach the seat panel (D) to the right (B) and left (C) chair leg with bolts and washers, using allen key to
tighten all the bolts.
SUNNY
LOGEN DINING ARM CHAIR
C
B
C
A
DD
FF
FF
CC
DD
DD
DD
AA
BB
BB
EE
SYPR
FF
FF
74500301
2
this
Adjust the foot leveler. Assembly complete.
IMPORTANT SAFETY INSTRUCTIONS
When using furnishing, basic precautions should always be followed, including the following:
Read all instructions before using (this furnishing).
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by, or near children, or disabled
persons, if applicable.
2. Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
SUNNY
LOGEN DINING ARM CHAIR
STEP3:
A
D
B
C
SYPR
74500301
3
/