2. agape
  3. APLD1

agape APLD1 Assembly Instructions

  • I have reviewed the installation instructions for the agape PLANA APLD1 shower model. This document provides guidance on fitting the gaskets, including cutting and positioning instructions. I'm ready to answer your questions regarding the installation of the gaskets.
  • What is the purpose of Gasket 1?
    Where should Gasket 2 be installed?
    How many pieces of Gasket 3 are needed?
istruzioni di montaggio / Instructions for installation
DOCCE “PLANA” APLD1
guarnizioni - AKIT920 / SHOWERS “PLANA” APLD1 gaskets - AKIT920
agape srl Via a. pITENTINO, 6 - 46037 Governolo Roncoferraro (MN) Italia
tel. 0376/250311 - www.agapedesign.it - Cod. 17002 - 30/01/2017
Guarnizione 1 / Gasket 1
Tagliare e montare la guarnizione alla stessa altezza dell’anta.
Cut and fit the gasket to the same height of the door.
Guarnizione 2 / Gasket 2
Tagliare e montare la guarnizione alla stessa all’altezza del fianco .
Cut and fit the gasket to the same height of the side panel.
Guarnizione 3 / Gasket 3
Tagliare e montare due pezzi negli spazi restanti.
Cut and fit two pieces in the remaining space
1
INTERNO
INSIDE
2
2
2
2
1
3
2
FIANCO
SIDE PANEL
/