2. WELLTECH
  3. WILLGATE26 Series

WELLTECH WILLGATE26 Series User manual

  • Hello! I've reviewed the Welltech Product Release Note for the WillGate26xx. This document details several key updates, including bug fixes for network and DSP issues, as well as added features like a timer for VOIP calls and improved voice volume. I'm ready to answer any questions you have about this release.
  • What issue related to network start is addressed in this release?
    What issue related to DSP download is addressed in this release?
    What new feature has been added for the FXO interface?
    What FXS routing change is introduced when PABX is turned on?
    What changes were made to the FXS and FXO voice volume?
Welltech Product Release Note
Date:2009/06/29
Division:
SDD1 Releaser:
Songyo
Model
Name:
WillGate26xx
product line
Object:
Subject:
release firmware : wg26xx_ap_106c
Release contents
Bug Fixed
1. Network fail to start when the leading 0 is not stripped (e.g. 192.168.018.018)
2. Fixed the DSP download failure occasionally during boot up.
Feature and Function Added
1. Added a timer to delay answer the VOIP incoming call to FXO when PSTN line doesn't support
polarity reverse.
2. When PABX mode is enabled and the FXS line is also registered, FXS do the routing based on
the FXO prefix routing table. (2644 only)
3. Increased voice volume for FXS and FXO. It is recommended to change the voice volume as
follows at default setting.
FXO: remove receive volume -3 db, local receive volume: 0 db
FXS: remove receive volume 0 db, local receive volume: - 3 or -6 db
Configuration Item Changed
Application Block Diagram
Hyperlink
WELLTECH WEB Site:http://www.welltech.com
Firmware Download: http://www.welltech.com/support/26xx.htm
User Manual: http://www.welltech.com/support/26xx.htm
Note
/