Bauknecht ELZM 7260 IN Program Chart

Type
Program Chart

Bauknecht ELZM 7260 IN offers you a wide range of functions to make cooking easier and more enjoyable. It features a user-friendly control panel with a variety of cooking functions, including special functions like minute minder, dough proving, and defrosting. The oven also has a cleaning function to assist in keeping the appliance clean.

Bauknecht ELZM 7260 IN offers you a wide range of functions to make cooking easier and more enjoyable. It features a user-friendly control panel with a variety of cooking functions, including special functions like minute minder, dough proving, and defrosting. The oven also has a cleaning function to assist in keeping the appliance clean.

(/=0
352'8&7'(6&5,37,216+((7
'( $7 *%

$&&(6625,(6
&21752/3$1(/
2YHQIXQFWLRQFKDUW
&22.,1*7$%/()25*5,//)81&7,21
&22.,1*7$%/(6
GB
Follow the instructions on the display
Displays
Remove the protective film, if present,
from the display.
Once the desired setting appears
on the display it can be confirmed
pressing the “OK” button and
the next step in the programming
can be carried out.
If the “<<“ cancel
button is pressed the
operation set is cancelled
and the previous screen is
restored.
The “-/+” browser knob has
different uses, depending on the
function chosen:
• For browsing through the
menus and the submenus
• For increasing/reducing the
indicated values
• For browsing through the
cooking functions
• For selecting the Turbogrill
option
For increasing/reducing the
cooking time and temperature
• For browsing through the
memories
The Function knob is used to select the various oven functions. Each click
of the knob corresponds to a function:
Turn the
F
knob two clicks to
the left.
The message SETTINGS
APPEARS ON THE DISPLAY
Auto Recipes
Setting (set)
Special functions
F
-/+
If the display shows the message
“Demo Mode in progress”
, the
heating elements of the cavity are disconnected.
To exit the “Demo” mode and restore normal oven operation,
proceed as follows:
1. Disconnect the oven from the mains and reconnect it within 60
seconds:
2. turn the Functions knob to the “Lamp” position
3. press the “<<” button,
4. turn the Functions knob to the “0” - Stand by position,
5. Press the “OK” button.
To enter the “Demo” sequence, proceed in the same manner.
Child Safety with control panel lock
To activate or deactivate the “Child Safety Lock” press simultaneously
on the “<<“ and “OK” buttons for 5 seconds. If activated, the
functions of the knobs and the buttons are locked and the display
shows the
Request for confirmation when the settings are changed
If the Function knob is turned during a cooking cycle, the oven asks you
to confirm this choice so as to avoid accidental changes to the cooking
cycle settings.
If the knob is turned back to its original position the display will show
the settings for the cooking cycle being performed.
In any case, the oven continues with the cooking cycle until the user
confirms the change in settings.
AUTO OFF device
For safety reasons, the oven switches off automatically (except for the
Special function) after 4.5 hours of continuous operation.
To save energy in Stand By mode, press button “<<“ to deactivate
the display (display in OFF mode). To switch the display back on, press
the button “<<“ again.
To change a language that has been set mistakenly, proceed as follows:
1. Turn the Function knob to the “SETTINGS” position, turn to
Language and confirm by pressing the “OKbutton.
2. Reselect the desired language using the “-/+” knob and confirm
pressing the “OK” button.
Description of control panel
Demo Mode
Safety Features
SETTINGS
Turn the knob two clicks to the left. The following message appears
on the display:
Reset brightness and
contrast settings
Set the Function
knob to OFF
Turn the Function
knob to settings
Press and hold “OK”
for 5 seconds.
Original factory
settings will be
restored.
* factory setting
language:
ENGLISH*
DEUTSCH
FRANCAIS
ITALIANO
ESPAÑOL
PORTUGUES
NEDERLANDS
SVENSKA
NORSK
DANSK
SUOMI
Restoring a language
Using the
Setting the clock
The clock appears on the display.
Highlight the desired time using the “-/+” knob and
confirm your choice pressing the “OK” button”.
GB
Follow the instructions on the display
The minute minder can only be set when the oven is not in use and allows a maximum setting of 3 hours
and 59 minutes.
To set the minute minder:
1. Leave the Function knob at “0”.
2. Press the “OK” button: the “TIMER” flashes on the display.
3. Turn the “-/+” knob to set the desired time.
4. Press the “OK” button to confirm the setting.
The minute minder starts its countdown; when the set time has elapsed, an acoustic signal sounds and the
word “END” appears on the display”. If the “OK” confirmation button is pressed, the acoustic signal stops
and the time of day appears on the display.
In any case, the minute minder can be deactivated at any time pressing the “<<” button twice.
Selecting the cooking time/delayed start:
Cooking time can be selected in order to turn the oven for a specified period of time. The maximum
programmed cooking time is 3 hours and 59 minutes.
When the oven is on, press the OK button to set cooking time. The symbol appears on the display.
Turn the knob “-/+” to display the desired cooking time. Confirm by pressing the OK button.
At this point, end of cooking time can be set so that food is ready at the desired time.
Press the “OK” button, appears on the display. Turn the knob “-/+” to display the desired end of
cooking time.
Turn the Function knob to the memory mode position to access the 15 auto recipes. Select the desired
recipe by scrolling through the recipes with the “-/+” knob.
N.B
: at the end of the set cooking time, extra cooking time can be added
At the end of cooking, “+/-” ADD TIME appears on the display. Turn the “+/-” knob to prolong the
cooking time as desired.
The oven features 15 auto recipes.
After selecting a recipe, press the OK confirmation button to start cooking.
WARM KEEPING To maintain a constant temperature inside the oven
- 60°C : for heating food.
Ideally, the first shelf should be used.
Both cooking time and end of cooking time can be selected.
DOUGH PROVING To maintain a constant temperature inside the oven
- 35°C: to raise pasta, bread and pizza.
DEFROSTING Ideal for thawing frozen food at room temperature.
- The food should be placed in the oven in its wrapping to
prevent it from drying out.
CLEANING To facilitate oven cleaning:
- gradually pour up to 250 ml max. of water over the bottom
of the oven.
- leave the oven to cool, then clean with a damp sponge.
These functions are only available with the selection of cooking time and/or end of cooking time.
Keep Warm
This function is used to maintain an oven temperature of 60°C at the end of cooking.
After setting cooking time and end of cooking time, press the OK button during cooking and select the Keep
Warm function.
At the end of the desired time, return the Function knob to 0 to switch the oven off.
Extra browning
This function is used for browning food at the end of cooking time.
At the end of cooking, extra cooking time can be added, or the Extra browning function selected. This
function is preset to last 5 minutes: press button << to deactivate the function at any time.
Special functions
Minute minder
Auto Recipes
Additional Options with Manual Functions
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Bauknecht ELZM 7260 IN Program Chart

Type
Program Chart

Bauknecht ELZM 7260 IN offers you a wide range of functions to make cooking easier and more enjoyable. It features a user-friendly control panel with a variety of cooking functions, including special functions like minute minder, dough proving, and defrosting. The oven also has a cleaning function to assist in keeping the appliance clean.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI