Aerpro FMT250 is a Bluetooth car charger that brings hands-free calling and music streaming capabilities to your vehicle. With its built-in FM transmitter, you can enjoy your favorite tunes or make and receive phone calls wirelessly through your car's audio system. Pairing your phone with the FMT250 is easy, and once connected, you can seamlessly switch between music and calls without taking your hands off the wheel. The device also features dual USB outputs, allowing you to charge two devices simultaneously with a maximum output of 5V/2.1A.
Aerpro FMT250 is a Bluetooth car charger that brings hands-free calling and music streaming capabilities to your vehicle. With its built-in FM transmitter, you can enjoy your favorite tunes or make and receive phone calls wirelessly through your car's audio system. Pairing your phone with the FMT250 is easy, and once connected, you can seamlessly switch between music and calls without taking your hands off the wheel. The device also features dual USB outputs, allowing you to charge two devices simultaneously with a maximum output of 5V/2.1A.
User Manual for FMT250 Bluetooth Car Charger
Thank you for purchasing the FMT250 Bluetooth Car Charger!
Please read this user manual carefully before using in order to
ensure correct use of proper functions!
Introduction to the Product
The FMT250 Bluetooth car charger that can switch the call to
the hands-free state via the Bluetooth provided your phone is
Bluetooth enabled. When the call is finished, it will be switch
back to music play automatically. You can also play music from
your phone to your cars sound system via Bluetooth. You can
enjoy the music and answer phone calls in hand-free mode
without refitting your car, which ensures the driving safety while
enjoying music.
Schematic Diagram of Appearance
Descriptions of the Schematic Diagram
1. Volume up/down, / CH+ CH-
2. Power indicator LED
3. LINE input hole
4. Switch off device
5. Answer/redial
6. Microphone
7. Press to hang up/reject a call/Press and hold to switch to CH
FM mode
8. LED display window
9. Power adaptor 9V-24V
10. USB output: 5V
11. USB output: 5V
Product Features
Any angle adjustable and applicable for all types of vehicles
FM transmitter
LED display window
LINE audio input
Independent Bluetooth start/shutdown button
Answer/hang up/reject/redial via Bluetooth
Bluetooth stereo music play
Call Echo Cancellation and Noise Reduction (CVC)
technology
Dual USB output voltage, provides powers to other devices
and the maximum output is 5V/2.1A
Automatic memory function of power failure frequency
point
Operation Instructions
FM Adjustment
You first want to change the FM transmission on your radio to
match what is on the LED display of the FMT250 Bluetooth Car
Charger. This ensures that you will hear both the device and your
phones audio through the speakers of your car. You can change
the FM transmission frequency on the FMT250 Bluetooth Car
Charger by doing the following:
Press and hold key to enter the frequency selection state.
At this time, the frequency on LED window will flash. Press
key to increase/decrease the frequency. Press and hold
key to increase/decrease the frequency more quickly.
Frequency is adjustable within 87.5 - 108MHZ.
Connecting to device via Bluetooth
1. Plug the FMT250 Bluetooth Car Charger into cigarette
lighter socket and switch the power to ON. The product will
start up and LED will display the frequency point once it is
powered.
2. If your using this device for the first time, your will need to
pair your phone to this device.
3. First enable the Bluetooth function on your phone. If the
FMT250 Bluetooth Car Charger is on, search for Bluetooth
devices and make sure that the ‘CAR KIT’ is there. Please
allow a minute or two for the FMT250 Bluetooth Car
Chargers Bluetooth to initialize if it doesn’t show on your
phone.
4. Select ‘CAR KIT’ and your phone should pair with the
FMT250 Bluetooth Car Charger automatically. A prompt
sound will be given after pairing.
Making a call
Dial a phone number using your phone and the audio will be
played through the car speakers.
Answering a call
If there is an incoming call, press key to answer the call.
You can switch between mobile phone microphone and the
Bluetooth Car Chargers microphone when in a call by pressing
the key. Press key to hang up.
Callback
Press key twice to call back the last number called.
Reject a Call
You can reject a call by pressing the key.
Play music in your phone
This product supports A2DP function, which allows you to play
music in your phone. Music will be transmitted to your car audio
via the FM function of the product so that you can enjoy music
high quality music. Press key to play/pause music on your
phone and press for the next/last song (NOTE: Some
phones with a lower system version may not support this
function).
Audio input mode
Insert the line in cable with one end inserted to the sound source
end and the other end to the product audio hole.
Press to turn up/down the volume and press and hold
it to turn up/down volume quickly.
Power-off memory
Every time the FMT250 Bluetooth Car Charger is powered off,
the system will memorize the FM frequency and it will connect
to your phone via Bluetooth automatically in order to facilitate
your usage.
Technical Parameters
Rated working voltage
12V
Limit working voltage
9 ~ 26V
USB output
5V/2.1A
Working temperature
0~50℃
SNR
>60dB
Degree of distortion
<0.1%
Frequency response
20Hz-15Khz
Resolution of right and
left channel
>60dB
Bluetooth version
Version 2.1+EDR
Bluetooth sound
processing
A2DP (Advance Audio Distribution
Profile) function supported
Bluetooth transmission
distance
10 Meters
Effective distance of
Bluetooth microphone
0.5~2 metres
FM frequency
87.5~108Mhz
FM Mode
Stereo digital PLL frequency
locking
Attention/Warning
This product contains dual USB outputs. It can charge two
devices at the same time with the maximum output of
5V/2.1A.
The Bluetooth Car Charger will connect automatically with
the phone via Bluetooth when turned on. If LINE is used
after Bluetooth connection, LINE mode will be used instead.
Never turn the volume to be too loud (generally at 28 or
below) when FM is working to avoid the sound distortion.
Please adjust the sound volume through the car audio.
A built-in antenna is provided for the product, so please
avoid using the broadcasting station frequency with a strong
signal so you can get better audio quality.
The procedure to pair your phone via Bluetooth may differ
depending on what phone you have.
Some phones may not support automatic connection if they
are powered on after a power failure. If this is the case,
please connect it manually.
This product is compatible with more than 95% phones on
the market but some are still incompatible. Please make sure
your phone is compatible with this product.
The volume should be proper during the call to avoid
affecting the other party.
Do not use this product in the environment with high
temperature, dusts or moisture.
Avoid dropping the product to prevent damage to the surface
or the body.
The Bluetooth of this product supports background play. If
there is a prompt tone when playing music with LINE
function, it will be automatically switched to the Bluetooth
mode. To return to LINE function, please pull and plug
LINE again.
What’s in the box
1. FMT250 Bluetooth Car Charger 2. User Manual
3. Auxiliary cable
Ou
r
goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
Technical Asisstance
If you need assistance setting up or using your Aerpro product now or in the future,
call Aerpro Support Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm
AE
ST
Please retain this user guide for future reference.
-
1
-
2
Aerpro FMT250 is a Bluetooth car charger that brings hands-free calling and music streaming capabilities to your vehicle. With its built-in FM transmitter, you can enjoy your favorite tunes or make and receive phone calls wirelessly through your car's audio system. Pairing your phone with the FMT250 is easy, and once connected, you can seamlessly switch between music and calls without taking your hands off the wheel. The device also features dual USB outputs, allowing you to charge two devices simultaneously with a maximum output of 5V/2.1A.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
