Bauknecht ETPV 9500 IN Program Chart

ETPV 9500 IN
Bauknecht
Brand
Bauknecht
Model
ETPV 9500 IN
Type
Program Chart

Bauknecht ETPV 9500 IN is a versatile cooktop with five cooking zones that offers a range of features to make cooking easier and more efficient. The double cooking zones allow you to cook with different size pots and pans, and the booster function rapidly heats up the cooking zone to the desired temperature. You can also use the timer feature to set cooking times for each zone, which will automatically switch off the zone when the time is up.

Bauknecht ETPV 9500 IN is a versatile cooktop with five cooking zones that offers a range of features to make cooking easier and more efficient. The double cooking zones allow you to cook with different size pots and pans, and the booster function rapidly heats up the cooking zone to the desired temperature. You can also use the timer feature to set cooking times for each zone, which will automatically switch off the zone when the time is up.

ETPV 9500 IN PRODUCT DESCRIPTION SHEET
DE GB IE FR NL IT
5019 419 66012
Any aesthetic defects (scratches, surface marks, etc.) must be reported immediately
upon installation.
Use two or more people to move and install the cooktop.
Failure to do so can result in back or other injuries.
DIMENSIONS OF THE HOB (mm)
1.
Left front cooking zone
Ø 145mm, 1200 W
2.
Left rear double cooking zone
Ø 265/170mm, 2200/1400 W
3.
Central rear cooking zone
Ø 180mm, 1800 W
4.
Right rear cooking zone
Ø 145mm, 1200 W
5.
Right front double cooking zone
Ø 180/120mm, 1700/700 W
6.
Display
Important:
To avoid permanently damaging the glass
ceramic top, do not use:
- pots with bottoms that are not perfectly
flat
- metal pots with enamelled bottom.
4gb66012.fm Page 1 Monday, December 1, 2003 5:44 PM
USING THE HOB
1-2-3-4-5. Power level display
6. Timer display (in minutes)
7-9. Second cooking zone button
8. Timer button
10. Safety lock button
11. ON/OFF button
Press the ON/OFF button to switch on the cooktop. For 10 seconds the display
will show a dash. If no cooking zone is switched on within 10 seconds, the hob
will automatically switch off.
To switch on the element you intend to use, press the corresponding
+
or
-
button within 10 seconds. When the + button is pressed the display will show
power level
9
, and when the
-
button is pressed it will show power level
4
.
After this operation, adjust the temperature with the
+/-
buttons.
To switch off an element, press the
-
button until
0
appears. The
corresponding LED will switch off after 10 seconds.
You can also switch off an element by pressing simultaneously the
+
and
-
buttons.
To switch off the hob, press the ON/OFF button . If all of the elements are set
to
0
, the hob will switch off after 10 seconds.
If an object is placed on the hob control panel or any liquid is spilt (water, milk,
etc.) the hob will automatically switch off and the symbol will light up.
If the hob features double zone cooking elements, switch on the second zone by
pressing the corresponding symbol for 3 seconds. After switching on the
second element, adjust the temperature with the
+/-
buttons.
When an element is switched off and the temperature is higher than 50°C, the
H
(Hot) LED near the
+
button will switch on. The
H
(Hot) LED will remain alight
until the hob cools down to a safe temperature.
4gb66012.fm Page 2 Monday, December 1, 2003 5:44 PM
The booster function permits reaching rapidly the desired temperature. To select
this function, switch on the desired cooking zone by pressing the relative
button +. The display will show the number 9 followed by a dot, indicating that
the booster function has been selected.
At this stage, set the desired cooking level within 10 seconds (normal cooking
5/6).
The booster will continue to blink until the selected temperature is reached;
after which, the display will stop blinking and the set cooking temperature will
remain constant. If no cooking zone is selected within 10 seconds after activating
the booster, the decimal point and the booster will switch off.
In addition, the count-down function can be used to select cooking time; to do
this, press the Timer button and then use the +/- buttons to select the desired
time. At the end of the countdown, an acoustic signal will indicate the end of
cooking time. Another function available is that of the Timer. To select this
function, first select and press the button of the relative cooking zone, then press
the Timer button once (the display will show the numbers 00). Immediately
afterwards, press the Timer button again (the display will show the letter t for
the selected cooking zone) and then use the +/- button to select the cooking time
(from 1 to 99 minutes). Once the cooking time is up, the Timer will automatically
switch off the selected cooking zone and an acoustic signal will sound for a few
seconds.
4gb66012.fm Page 3 Monday, December 1, 2003 5:44 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3

Bauknecht ETPV 9500 IN Program Chart

ETPV 9500 IN
Bauknecht
Brand
Bauknecht
Model
ETPV 9500 IN
Type
Program Chart

Bauknecht ETPV 9500 IN is a versatile cooktop with five cooking zones that offers a range of features to make cooking easier and more efficient. The double cooking zones allow you to cook with different size pots and pans, and the booster function rapidly heats up the cooking zone to the desired temperature. You can also use the timer feature to set cooking times for each zone, which will automatically switch off the zone when the time is up.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents