Bauknecht ETPV 9500 IN Program Chart

ETPV 9500 IN PRODUCT DESCRIPTION SHEET

DE GB IE FR NL IT

5019 419 66012

Any aesthetic defects (scratches, surface marks, etc.) must be reported immediately

upon installation.

Use two or more people to move and install the cooktop.

Failure to do so can result in back or other injuries.

DIMENSIONS OF THE HOB (mm)

Left front cooking zone

Ø 145mm, 1200 W

Left rear double cooking zone

Ø 265/170mm, 2200/1400 W

Central rear cooking zone

Ø 180mm, 1800 W

Right rear cooking zone

Ø 145mm, 1200 W

Right front double cooking zone

Ø 180/120mm, 1700/700 W

Display

Important:

To avoid permanently damaging the glass

ceramic top, do not use:

- pots with bottoms that are not perfectly

flat

- metal pots with enamelled bottom.

4gb66012.fm Page 1 Monday, December 1, 2003 5:44 PM

USING THE HOB

1-2-3-4-5. Power level display

6. Timer display (in minutes)

7-9. Second cooking zone button

8. Timer button

10. Safety lock button

11. ON/OFF button

Press the ON/OFF button to switch on the cooktop. For 10 seconds the display

will show a dash. If no cooking zone is switched on within 10 seconds, the hob

will automatically switch off.

To switch on the element you intend to use, press the corresponding

button within 10 seconds. When the + button is pressed the display will show

power level

, and when the

button is pressed it will show power level

After this operation, adjust the temperature with the

+/-

buttons.

To switch off an element, press the

button until

0

appears. The

corresponding LED will switch off after 10 seconds.

You can also switch off an element by pressing simultaneously the

and

buttons.

To switch off the hob, press the ON/OFF button . If all of the elements are set

0

, the hob will switch off after 10 seconds.

If an object is placed on the hob control panel or any liquid is spilt (water, milk,

etc.) the hob will automatically switch off and the symbol will light up.

If the hob features double zone cooking elements, switch on the second zone by

pressing the corresponding symbol for 3 seconds. After switching on the

second element, adjust the temperature with the

+/-

buttons.

When an element is switched off and the temperature is higher than 50°C, the

(Hot) LED near the

button will switch on. The

(Hot) LED will remain alight

until the hob cools down to a safe temperature.

4gb66012.fm Page 2 Monday, December 1, 2003 5:44 PM

The booster function permits reaching rapidly the desired temperature. To select

this function, switch on the desired cooking zone by pressing the relative

button +. The display will show the number 9 followed by a dot, indicating that

the booster function has been selected.

At this stage, set the desired cooking level within 10 seconds (normal cooking

5/6).

The booster will continue to blink until the selected temperature is reached;

after which, the display will stop blinking and the set cooking temperature will

remain constant. If no cooking zone is selected within 10 seconds after activating

the booster, the decimal point and the booster will switch off.

In addition, the count-down function can be used to select cooking time; to do

this, press the Timer button and then use the +/- buttons to select the desired

time. At the end of the countdown, an acoustic signal will indicate the end of

cooking time. Another function available is that of the Timer. To select this

function, first select and press the button of the relative cooking zone, then press

the Timer button once (the display will show the numbers 00). Immediately

afterwards, press the Timer button again (the display will show the letter t for

the selected cooking zone) and then use the +/- button to select the cooking time

(from 1 to 99 minutes). Once the cooking time is up, the Timer will automatically

switch off the selected cooking zone and an acoustic signal will sound for a few

seconds.

4gb66012.fm Page 3 Monday, December 1, 2003 5:44 PM

Bauknecht ETPV 9500 IN Program Chart

Related papers

Other documents