Schwinn 125 Owner's manual

ASSEMBLY MANUAL / OWNER’S MANUAL

Manual en Español Latino Americano:

http://www.schwinnfitness.com

2

Important Safety Instructions - Assembly 3

Safety Warning Labels / Serial Number 4

Specifications 5

Before Assembly 5

Parts 6

Hardware 7

Tools 7

Assembly 8

Moving the Bike 18

Leveling the Bike 18

Important Safety Instructions - Owner’s 19

Features 20

Console Features 21

Contact Heart Rate (CHR) 22

Operations 24

Adjustments 24

Initial Setup 25

Quick Start / Manual Program 25

Workout Program Selection 25

User Setup Mode 25

Custom Workout 27

Profile Programs 27

Results/Cool Down Mode 28

Pausing or Stopping 28

User Statistics 28

Console Setup 29

Maintenance 30

Troubleshooting 32

Warranty 35

TABLE Of CONTENTS

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@

To validate warranty support, keep the original proof of purchase and record the following information:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty , go to: www.SchwinnFitness.com/register

Or call 1 (800) 605–3369.

If you have questions or problems with your product, please call 1 (800) NAUTILUS (628–8458).

3

IMpORTANT SAfETY INSTRUCTIONS

— ASSEMBLY

!

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

!

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions.

• Keepbystandersandchildrenawayfromtheproductyouareassemblingatalltimes.

• Donotconnectpowersupplytothemachineuntilinstructedtodoso.

• Donotassemblethismachineoutdoorsorinawetormoistlocation.

• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafficandexposuretobystanders.

• Somecomponentsofthemachinecanbeheavyorawkward.Useasecondpersonwhendoingtheassemblysteps

involving these parts. Do not do steps that involve heavy lifting or awkward movements on your own.

• Setupthismachineonasolid,level,horizontalsurface.

• Donottrytochangethedesignorfunctionalityofthismachine.Thiscouldcompromisethesafetyofthismachineandwill

void the warranty.

• Ifreplacementpartsarenecessary,useonlygenuineNautilus®replacementpartsandhardware.Failuretousegenuine

replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty.

• Donotuseuntilthemachinehasbeenfullyassembledandinspectedforcorrectperformanceinaccordancewiththe

Manual.

• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforefirstuse.KeeptheManualforfuture

reference.

• Doallassemblystepsinthesequencegiven.Incorrectassemblycanleadtoinjuryorincorrectfunction.

• Thisproductcontainsmagnets.Magneticfieldscaninterferewiththenormaluseofcertainmedicaldevicesataclose

range.Usersmaycomeintoproximityofthemagnetsintheassembly,maintenance,and/oruseoftheproduct.Given

the obvious importance of these devices, such as a pacemaker, it is important that you consult with your medical provider

inconnectionwiththeuseofthisequipment.Pleaseconsultthe“SafetyWarningLabelsandSerialNumber”sectionto

determine the location of the magnets on this product.

4

SAfETY WARNINg LABELS ANd

SERIAL NUMBER

FCC Compliance

!

Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidthe

user’sauthoritytooperatetheequipment.

The power supply complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that may

cause undesired operation.

Note: This power supply has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledand

used in accordance with the instructions, may cause harmful interference to radio communications.

However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmful

interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuseris

encouraged to try to correct the interference by one or more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Serial Number

•

300lbs. (136kg).

Keep children away.

Prior to use, read and understand the

Owners Manual.

Injury or death is possible if Caution is not

used while using this machine.

The maximum user weight for this

machine is 300 lbs (136 Kg).

Replace any “Caution” “Warning” or

“Danger” label that is illegible, damaged,

or removed.

This machine is for home use only.

•

8000492

REVISIONS

ECO

REVISION

REV DESCRIPTION

APPROVED

DATE

TITLE.

PART NO.

REV.

SHEET 1 OF 1

SCALE: 1:1

DO NOT SCALE DRAWING

1. ALL ITEMS MUST BE RoHS COMPLIANT

2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.

4. ALL MACHINES SURFACES Ra 3.2 uM.

5. ALL APPLICABLE NAUTILUS STANDARDS AND

SPECIFICATIONS APPLY.

6. ALL DIMENSIONS ARE IN MILLIMETERS

7. ALL DUAL DIMENSIONS ARE IN INCH

UNLESS OTHERWISE SPECIFIED:

METRIC

THIRD ANGLE

PROJECTION

INTERPRET DIMENSIONS AND TOLERANCES

PER ASME Y14.5M - 1994

2.5

1.5

0.75

0.25

1°

X.

X.X

X.XX

X.XXX

ANGULAR

C

SIZE

TOLERANCES.

DRAWN

DESIGNED

DATE

METRIC_C_REV G

NAUTILUS, INC.

16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683

LIFECYCLE

APPROVALS

- - - -

WARRANTY ITEM:

LSEVIER

6/15/2012

LSEVIER

B

SCH 125 PRODUCT SPECIFICATION DECAL

MATERIAL.

COLOR.

DIE LINE

BLACK

Labels must be created from an agency approved tamper proof labeling system

such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.

Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),

Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.

NOTE:

MM/YY - PRODUCTION DATE. THE SUPPLIER WILL FILL IN THIS DATE ON EACH UNIT BASED

ON THE PRODUCTION DATE: MONTH AND YEAR.

JSTOB

COMPLIANCE

This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work for Nautilus, Inc. without written authorization. © Nautilus, Inc. This document is provided in condence and your acceptance of this document is your agreement to maintain the document in condence.

01

PROTOTYPE

XXXXX

LSEVIER

6/15/2012

A

RELEASE

000143

LSEVIER

8/2/2012

XXXXX

B

UPDATE AMP TO 1.5A CHANGE USER WEIGHT TO 300LB

LSEVIER

8/16/2012

18225 NE Riverside Parkway,Portland, Or. 97230

www.nautilus.com

Phone:1-800-NAUTILUS

Brand: SCHWINN Model: 125

Electrical Rating: 9VDC,1.5A Accuracy Class: H

Use: For consumer use only.

Maximum User Weight: 300lb (136kg)

Fitness Equipment Type

Made in: China

8000492_B

Manufacture Date:

40mm

50mm

Patent: www.nautilusinc.com/IP

Nautilus, Inc.

®

MM/YY

5

SpECIfICATIONS

Before Assembly

Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard,

levelsurface.Allowaworkoutareaofaminimum90”x69”(229cmx175cm).

Basic Assembly Tips

Follow these basic points when you assemble your machine:

•Readandunderstandthe“ImportantSafetyInstructions”beforeassembly.

•Collectallthepiecesnecessaryforeachassemblystep.

•Usingtherecommendedwrenches,turntheboltsandnutstotheright(clockwise)totighten,andtheleft(counterclock-

wise) to loosen, unless instructed otherwise.

•Whenattaching2pieces,lightlyliftandlookthroughtheboltholestohelpinserttheboltthroughtheholes.

•Theassemblyrequires2people.

Maximum User Weight: 300 lbs. (136 kg)

Power Requirements:

 OperationalVoltage:OperationalVoltage9VDC

Operating Current: 1500 mA

Regulatory Approvals:

AC Power Adapter: UL listed, CSA certified (or

equivalent),Rated120V60Hz

Input,9VDC,1500mAOutput.

Class 2 or LPS.

!

This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth

defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65. If you would like

additional information, please refer to our website at www.nautilus.com/prop65.

52”

(132 cm)

42” (106 cm)

21”

(53 cm)

6

Item Qty Description Item Qty Description

1 1 Main Frame

9 1 AC Adapter

2 1 Rear Stabilizer

10 1 Left Pedal

3 1 Front Stabilizer

11 1 Right Pedal

4 1 Seat Post

12 1 Seat

5 1 Console Mast

13 1 Water Bottle Holder

6 1 Handlebar

14 1 AdjustmentKnob

7 1 Handlebar Bracket Cover

15 1 MP3 Cord (not shown)

8 1 Console

pARTS

1

8

13

12

9

11

10

7

6

5

4

2

3

14

7

Tools

Included Not Included

6 mm

Item Qty Description Item Qty Description

A 4 FlatHeadHexScrewM8x16 E 1 HexBoltM7x30

B 4 ButtonHeadHexScrewM8x16 F 1 Flat Washer M7

C 4 Curved Washer G 1 Lock Washer M7

D 4 Cap

(recommended)

HARdWARE / TOOLS

8

1. Attach Stabilizers to Frame

Note: Make sure the Schwinn

®

decal on the Rear Stabilizer faces outward from the machine.

ASSEMBLY

6mm

1

A

3

2

9

2. Attach Pedals to Frame Assembly

10

11

X2

10

3. Attach Seat Post and Seat to Frame Assembly

NOTICE: Make sure the adjustment knob engages the Seat Post. Be sure the Seat is straight.

14

4

12

11/16”

11

4. Connect Console Mast Cable to Frame Assembly Cable

NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp Console Cable.

5

12

5. Attach Console Mast to Frame Assembly

NOTICE: Do not crimp Console Cable.

Note: Do not fully tighten the hardware.

X4

C

B

6mm

13

6. Attach Handlebars to Frame Assembly

NOTICE: Do not crimp the cables. Remove the pre-installed plug from the mast, route the HR cable through the hole to

the top of the mast, and reinstall the plug.

6

7

E

F

6mm

G

14

8. Connect Cables and Attach Console to Frame Assembly

NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not crimp Console

Cable. Do not fully tighten the hardware.

7. Remove Hardware from Console

NOTICE: Do not crimp the cables.

Note: Hardware is pre-installed ( * ).

8

*

X4

*

15

9. Adjust the Console and Console Mast and Tighten Hardware

D

6mm

X4

16

10. Install Water Bottle Holder on Console Mast

Note: The hardware is pre-installed on the console mast and not on the hardware card ( * ).

X2

13

*

17

11. Connect AC Adapter to Frame Assembly

12. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are properly assembled.

Be sure to record the serial number in the field provided at the front of this manual.

!

Do not use or put the machine into service until the machine has been fully assembled and inspected for correct

performance in accordance with the Owner’s Manual.

9

18

Leveling Your Bike

The levelers are the polygonal end caps on the Rear Stabilizer. Turn the end cap to adjust the level. Make sure the bike is level

andstablebeforeyouexercise.

Moving Your Bike

To move the upright bike, carefully tilt the Handlebars toward you while pushing the front of the bike downward. Push the bike to

the desired location.

NOTICE: Be careful when you move the bike. All abrupt motions can affect the computer operation.

BEfORE YOU START

19

!

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Before using this equipment, obey the following warnings:

!

ReadandunderstandthecompleteManual.KeeptheManualforfuturereference.

Read and understand all warnings on this machine. If at any time the Warning stickers become loose, unreadable or

dislodged, contact Nautilus

®

Customer Service for replacement stickers.

• Childrenmustnotbeletonorneartothismachine.Movingpartsandotherfeaturesofthemachinecanbedangerousto

children.

• Notintendedforusebyanyoneunder14yearsofage.

• Consultaphysicianbeforeyoustartanexerciseprogram.Stopexercisingifyoufeelpainortightnessinyourchest,

become short of breath, or feel faint. Contact your doctor before you use the machine again. Use the values calculated or

measured by the machine’s computer for reference purposes only.

• Beforeeachuse,examinethismachineforloosepartsorsignsofwear.Donotuseiffoundinthiscondition.Monitorthe

Seat, Pedals, and Crank Arms closely. Contact Nautilus

®

Customer Service for repair information.

• Maximumuserweightlimit:300lbs.(136kg).Donotuseifyouareoverthisweight.

• Thismachineisforhomeuseonly.

• Donotwearlooseclothingorjewelry.Thismachinecontainsmovingparts.Donotputfingersorotherobjectsinto

movingpartsoftheexerciseequipment.

• Setupandoperatethismachineonasolid,level,horizontalsurface.

• MakethePedalsstablebeforeyousteponthem.Usecautionwhenyousteponandoffthemachine.

• Disconnectallpowerbeforeservicingthismachine.

• Donotoperatethismachineoutdoorsorinmoistorwetlocations.Keepthefootpedalscleananddry.

• Keepatleast24”(0.6m)oneachsideofthemachineclear.Thisistherecommendedsafedistanceforaccessand

passagearoundandemergencydismountsfromthemachine.Keepthirdpartiesoutofthisspacewhenmachineisin

use.

• Donotoverexertyourselfduringexercise.Operatethemachineinthemannerdescribedinthismanual.

• CorrectlyadjustandsafelyengageallPositionalAdjustmentDevices.MakesurethattheAdjustmentDevicesdonothit

the user.

• Exerciseonthismachinerequirescoordinationandbalance.Besuretoanticipatethatchangesinspeedandresistance

level can occur during workouts, and be attentive in order to avoid loss of balance and possible injury.

IMpORTANT SAfETY INSTRUCTIONS

20

A Console I AdjustmentKnob,SeatPost

B Handlebars, Upright J Water Bottle Holder

C Transport Wheel K Adjustable Seat

D Stabilizer L MP3 Input

E Pedal M Fan

F Leveler N Speaker

G AC Adapter Plug O Contact Heart Rate (CHR) Sensors

H Shrouded Main Frame P Media Tray

fEATURES

A

B

J

C

E

D

F

G

H

K

D

I

M

N

O

L

P

Page is loading ...

Schwinn 125 Owner's manual

This manual is also suitable for

Schwinn 125 Owner's manual

Related papers

Other documents