Kenwood DNN9150DAB Quick start guide

You can update the system by connecting a USB device containing an

update le.

For updating the system, visit <http://www2.jvckenwood.com/cs/ce/>.

CONNECTED NAVIGATION SYSTEM

DNN9250DAB

DNN6250DAB

CONNECTED MONITOR WITH DVD RECEIVER

DNR8025BT

Quick Start Guide

2 ñ English

Contents About The Quick Start Guide

This Quick Start Guide describes basic functions of

this unit.

For functions not described in this Guide, refer to the

Instruction Manual on the following website:

http://manual.kenwood.com/edition/im383/

To refer to the Instruction Manual, a PC loaded with

Microsoft® Windows XP/Vista/7/8 or Mac OS X® 10.4 or

later is required in addition to Adobe® Reader™ 7.1 or

Adobe® Acrobat® 7.1 or later.

The Instruction Manual is subject to change for

modiﬁcation of speciﬁcations and so forth. Be sure to

download the latest edition of the Instruction Manual

for reference.

✎ NOTE

• The panels shown in this guide are examples used

to provide clear explanations of the operations. For

this reason, they may be diﬀerent from the actual

panels.

• In operation procedures, bracket shape indicates

the key or button you should control.

< >: indicates the name of panel buttons.

[ ]: indicates the name of touch keys

About The Quick Start Guide ............................... 2

Precautions .................................................................3

Safety Precautions and Important

Information ..............................................................5

Features of Connected systems .......................... 6

First Step .......................................................................7

Functions of the Buttons

on the Front Panel ............................................... 10

Common Operation ...............................................14

Detaching The Front Panel .................................15

Login ............................................................................ 16

Operation on the Home Screen ........................16

How to Use the Navigation System

(DNN9250DAB/ DNN6250DAB) ...................... 17

How to Play Music ...................................................19

How to Play Movie .................................................. 21

How to Listen to the Radio .................................. 21

How to Make a Phone Call ...................................22

Installation .................................................................23

iPod/ iPhone/ Android setup .............................31

About this Unit .........................................................34

English ñ 3

Precautions

2WARNING

Ñ To prevent injury or re, take the following

precautions:

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools)

inside the unit.

• Do not watch or ﬁx your eyes on the unit’s

display when you are driving for any extended

period.

• If you experience problems during installation,

consult your Kenwood dealer.

Ñ Precautions on using this unit

• When you purchase optional accessories, check

with your Kenwood dealer to make sure that they

work with your model and in your area.

• You can select language to display menus, audio

ﬁle tags, etc. See Language setup (P.126) in

the Instruction Manual.

• The Radio Data System or Radio Broadcast Data

System feature won’t work where the service is

not supported by any broadcasting station.

Ñ Protecting the monitor

To protect the monitor from damage, do not

operate the monitor using a ballpoint pen or

similar tool with the sharp tip.

Ñ Lens fogging

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

disc player of the unit. Called lens fogging, this

condensation on the lens may not allow discs to

play. In such a situation, remove the disc and wait

for the condensation to evaporate. If the unit still

does not operate normally after a while, consult

your Kenwood dealer.

Ñ Precautions on handling discs

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc

with tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move

outward.

• When removing discs from this unit, pull them

out horizontally.

• If the disc center hole or outside rim has burrs,

use the disc only after removing the burrs with a

ballpoint pen etc.

• Discs that are not round cannot be used.

• 8-cm (3 inch) discs cannot be used.

• Discs with coloring on the recording surface or

discs that are dirty cannot be used.

• This unit can only play the CDs with

.

This unit may not correctly play discs which do

not have the mark.

• You cannot play a disc that has not been

ﬁnalized. (For the ﬁnalization process see your

writing software, and your recorder instruction

manual.)

Ñ Erase the personal information

Before giving or selling this unit to others, be sure

to delete the information (mail, search logs, etc.)

stored in this unit by yourself and conﬁrm that the

data has been deleted.

We shall not be liable for any damage caused by

leakage of undeleted data.

1. Press the <HOME> button.

2. Press the <MENU> button.

3. Touch [Settings].

4. Touch [Backup & Reset].

5. Touch [Factory data reset].

6. Enter owner password. Touch [Rest].

7. Touch [ERASE].

4 ñ English

Ñ Acquiring GPS signal

(DNN9250DAB/ DNN6250DAB)

The ﬁrst time you turn on this unit, you must wait

while the system acquires satellite signals for the

ﬁrst time. This process could take up to several

minutes. Make sure your vehicle is outdoors in an

open area away from tall buildings and trees for

fastest acquisition.

After the system acquires satellites for the ﬁrst time,

it will acquire satellites quickly each time thereafter.

Ñ About the front panel

(DNN9250DAB/ DNR8025BT)

When removing the product from the box or

installing it, the front panel may be positioned

at the angle shown in (Fig. 1). This is due to the

characteristics of mechanism the product is

equipped with.

When the product is ﬁrst powered on works

properly, the front panel will automatically move

into the position (initial setting angle) shown in

(Fig. 2).

(Fig. 1)

(Fig. 2)

Ñ Cleaning The Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth. If the faceplate

is stained badly, wipe the stain oﬀ with a cloth

moistened with neutral cleaner, then wipe it again

with a clean soft dry cloth.

! CAUTION

• Applying spray cleaner directly to the unit may

aﬀect its mechanical parts. Wiping the faceplate

with a hard cloth or using a volatile liquid such as

thinner or alcohol may scratch the surface or erase

screened print.

Ñ How To Reset Your Unit

If the unit or the connected unit fails to operate

properly, reset the unit.

1 Press the <Reset> button.

The unit returns to factory settings.

⿠DNN9250DAB/DNR8025BT

HOME 6

DNR8025BT

⿠DNN6250DAB

✎ NOTE

• Disconnect the USB device before pressing the

<Reset> button. Pressing the <Reset> button with

the USB device connected can damage the data

stored in the USB device. For how to disconnect the

USB device, see How to Play Music (P.19).

• When the unit is turned on after resetting, the Initial

SETUP screen appears. See First Step (P.7).

English ñ 5

Safety Precautions and

Important Information

Read this information carefully before starting to

operate the Kenwood Car Navigation System and

follow the instructions in this manual. Neither

Kenwood nor Garmin shall be liable for problems

or accidents resulting from failure to observe the

instructions in this manual.

2WARNINGS

Failure to avoid the following potentially

hazardous situations could result in an accident

or collision resulting in death or serious injury.

When navigating, carefully compare information

displayed on the navigation system to all available

navigation sources, including information from

street signs, visual sightings, and maps. For safety,

always resolve any discrepancies or questions before

continuing navigation.

Always operate the vehicle in a safe manner.

Do not become distracted by the navigation system

while driving, and always be fully aware of all driving

conditions. Minimize the amount of time spent

viewing the screen of the navigation system while

driving, and use voice prompts when possible.

Do not enter destinations, change settings, or

access any functions requiring prolonged use of the

navigation system controls while driving. Stop your

vehicle in a safe and legal manner before attempting

such operations.

Keep the system volume at a low enough level to be

able to hear outside noises while driving. If you can

no longer hear outside noises, you may be unable

to react adequately to the traﬃc situation. This may

cause accidents.

The navigation system will not display the correct

current position of the vehicle the ﬁrst time it is

used after purchase, or if the vehicle battery is

disconnected. GPS satellite signals will soon be

received, however, and the correct position will be

displayed.

Be careful of the ambient temperature. Using the

navigation system at extreme temperatures can lead

to malfunction or damage. Also note that the unit can

be damaged by strong vibration, by metal objects, or

by water getting inside the unit.

2CAUTIONS

Failure to avoid the following potentially

hazardous situations may result in injury or

property damage.

The navigation system is designed to provide you

with route suggestions. It does not reﬂect road

closures or road conditions, weather conditions, or

other factors that may aﬀect safety or timing while

driving.

Use the navigation system only as a navigational aid.

Do not attempt to use the navigation system for any

purpose requiring precise measurement of direction,

distance, location, or topography.

The Global Positioning System (GPS) is operated

by the United States government, which is solely

responsible for its accuracy and maintenance. The

government system is subject to changes that

could aﬀect the accuracy and performance of all

GPS equipment, including the navigation system.

Although the navigation system is a precision

navigation device, any navigation device can be

misused or misinterpreted and, therefore, become

unsafe.

IMPORTANT INFORMATION

Ñ Vehicle Battery Preservation

This navigation system can be used when the ignition

key is turned to ON or ACC. To preserve the battery,

however, it should be used with the engine running

whenever possible. Using the navigation system for a

long time with the engine switched oﬀ can cause the

battery to run down.

Ñ Map Data Information

One of the goals of Garmin is to provide customers

with the most complete and accurate cartography

that is available to us at a reasonable cost. We use

a combination of governmental and private data

sources, which we identify in product literature and

copyright messages displayed to the consumer.

Virtually all data sources contain some inaccurate or

incomplete data. In some countries, complete and

accurate map information is either not available or is

prohibitively expensive.

6 ñ English

Ñ Cooperation with Route Collector site

• Destinations and routes speciﬁed on the PC can be input to this navigation system.

• The routes you have traveled and the songs you have listened to can be logged.

• By uploading music ﬁles to Dropbox and creating a play list on Route Collector site, you can

listen to music anywhere through streaming without music ﬁles on this unit.

• Speech to Text (STT) and Text to Speech (TTS).

Ñ Use of internet service

• Streaming service such as YouTube, Aupeo!.

• Internet service such as email, Gmail, Google calendar, and social networking service such as

Facebook and Twitter.

• Information (weather*, traﬃc*, RSS, etc.) service.

Ñ Wi-Fi access point

• Connect to Internet using the tethering

function of your smartphone or an Internet

device.

Ñ About the account

• To use internet services via this system, you

need to create an account in the Route

Collector site.

• In addition to the owner account, you can

register up to four user accounts.

• You can use a guest account as well.

• By switching among accounts, you can secure

the privacy when using the mail feature or

social media.

HOME 6

DNR8025BT

Ñ Wi - Fi (11n /g/b)

Ñ 4G, 3G, LTE or EDGE

✎ Notes

You can use following feature for 2 years

after registration of the owner account.

To use it continuously, a usage fee is

required. For details, see web site of

Route Collector. http://www.route-

collector.com/

• Weather (by INRIX)*

• Traﬃc (by INRIX)*

• Dynamic Parking (by INRIX)*

• Fuel Prices (by INRIX)*

• Real-Time Traﬃc Camera (by INRIX)*

• Movie Show Times (by WWM)*

• TTS (by Nuance)

• STT (by Nuance)

To use the following services, you need

to register the corresponding free or

paid accounts.

• Aupeo!

• Facebook

• Twitter

• Gmail (by Google)

• Google calendar (by Google)

• Dropbox

* DNN9250DAB/ DNN6250DAB only

Features of Connected systems

By connecting this unit to Internet, you can use various services.

Ñ Wi-Fi hotspot

• This unit becomes the Wi-Fi access point

and you can enjoy music and video in a

smartphone Wi-Fi connected by Kenwood

Wireless Link.

English ñ 7

First Step

Power on the unit and perform some setup steps

before using.

1 Press the <8HOME> button.

⿠DNN9250DAB/DNR8025BT

HOME 6

DNR8025BT

⿠DNN6250DAB

The unit is turned on.

✎ NOTE

• “Initial setup” also appears when the unit is reset.

2 Touch the corresponding key and set the

item.

Language Setup

Select the language used for the GUI and input

methods. Default is “English (United States)”.

1) Touch [Language Setup].

2) Select a language from the list.

WiFi Setup

Conﬁgure settings for connection to Wi-Fi.

1) Touch [WiFi Setup].

2) Slide Wi-Fi to ON.

3) Select the Wi-Fi access point to register from

the list.

4) Enter the Password.

5) Touch [Connect].

After setting, press the < 6 > button.

Date Setup

Set the date and time.

1) Touch [Date Setup].

2) Touch [Select time zone].

3) Select a time zone.

After setting, press the < 6 > button.

Account Setup

Set the information about the user of this unit.

1) Touch [Account Setup].

See Types of accounts, Create User Account and

Set Owner Account.

8 ñ English

⿠Types of accounts

Administrator

As Administrator, you can create an owner account

and perform initial setup.

You can log in to the system if you have not created

an owner account.

Guest

An account for guests such as your friends.

The guest can operate this unit, but cannot use the

functions related to mail, social media, and Route

Collector site.

Owner

The account for the person who manages this unit.

The owner can use the functions related to mail,

social media, and Route Collector site.

You can register users such as your family.

User

The account for the user of this unit.

The user can use the functions related to mail, social

media, and Route Collector site.

You can register up to 4 user accounts.

⿠Create User Account

✎ Preparation

• To register yourself in the Route Collector site as a

user, you need a mail address.

• You can register yourself via the Web.

http://www.route-collector.com/

• This step may be skipped if you have already

registered yourself in the Route Collector site.

1) Touch [Create Account].

2) Enter account information.

You cannot register an account which has

already been used. Register another account

name.

3) Touch [OK].

The account is temporarily registered in the

Route Collector site.

4) Activate the account.

A conﬁrmation mail is sent to the registered mail

address. Open the indicated URL to complete

account registration.

⿠Set Owner Account

1) Touch [Set Owner Account].

2) Enter account information.

Enter the information registered in the Route

Collector site.

3) Touch [OK].

3 Touch [Next].

4 Touch the corresponding key and set the

item.

Locale

Select the country for the navigation system.

The language, the distance unit, and the gasoline

unit are set.

After setting, touch [Enter].

Language

Select the language used for the control screen and

setting items. Default is “American English (en)”.

After setting, touch [Enter].

Angle (DNN9250DAB/DNR8025BT only)

Adjust the position of the monitor. Default is “0”.

After setting, touch [

].

Color

Set the screen and button illumination color. You

can select whether to perform color scan and adjust

scanning color.

After setting, touch [

].

Camera

Set the parameters for the camera.

After setting, touch [

].

DEMO

Set the demonstration mode. Default is “ON”.

English ñ 9

5 Touch [Finish].

✎ NOTE

• For details on operations of each setting, refer to the

Instruction Manual.

6 Touch [Administrator] or [Owner].

Ñ How to prepare the remote control

(DNN9250DAB)

Insert two “AAA”/“R03”-size batteries with the and

poles aligned properly, following the illustration

inside the case.

! CAUTION

• Put the remote controller in a place where it will

not move during braking or other operations. A

dangerous situation could result, if the remote

controller falls down and gets wedged under the

pedals while driving.

• Do not leave the battery near re or under direct

sunlight. A re, explosion or excessive heat

generation may result.

• Do not recharge, short, break up or heat the

battery or place it in an open re. Such actions

may cause the battery to leak uid. If spilled uid

comes in contact with your eyes or on clothing,

immediately rinse with water and consult a

physician.

• Place the battery out of reach of children. In the

unlikely event that a child swallows the battery,

immediately consult a physician.

10 ñ English

Functions of the Buttons on the Front Panel

Ñ DNN9250DAB/ DNR8025BT

HOME 6

DNR8025BT

10

9

1 4 5 6 7 82 3

Ñ How to insert an SD card (DNN9250DAB)

1) Press

8

<

G> button for 1 second.

The panel fully opens.

2) Hold the SD card as the illustration in the right and insert it into the slot until it clicks.

⿠To eject the card:

Push the card until it clicks and then remove your ﬁnger from the card.

The card pops up so that you can pull it out with your ﬁngers.

0

Labelled

side

English ñ 11

No. Name/ Motion

1

s (Reset)

• If the unit or the connected unit fails

to operate properly, the unit returns

to initial settings when this button is

pressed (Instruction Manual P.151).

• If the SI function is turned on, this

indicator ﬂashes when the vehicle

ignition is oﬀ (Instruction Manual

P.126).

2

R, S (Vol)

• Adjusts volume.

3

Remote Sensor

• Receives the remote control signal.

4

NAV (DNN9250DAB)

• Displays the navigation screen.

• Pressing for 1 second turns the screen oﬀ.

APPS (DNR8025BT)

• Displays the APPS screen.

• Pressing for 1 second turns the screen oﬀ.

5

MENU

• Displays the option menu screen.

• Pressing for 1 second switches AV out

sources.

6

HOME

• Displays the Home screen (P.16).

• Pressing for 1 second turns the power oﬀ.

• When the power oﬀ, turns the power on.

7

6 (Back)

• Return to the previously viewed screen.

• Pressing for 1 second displays the Hands

Free screen (Instruction Manual

P.116).

8

G (Eject)

• Ejects the disc.

• When the panel is opened, pressing

closes the panel and pressing for 1

second ejects the disc forcibly.

• When the panel is closed, pressing

for 1 second fully opens the panel

to the location of the SD card slot.

(DNN9250DAB)

9

Disc insert slot

• A slot to insert a disc media.

No. Name/ Motion

p

SD card slot (DNN9250DAB)

• A slot to insert an SD card.

12 ñ English

Ñ DNN6250DAB

124

5

6

8

9

3

7

Ñ How to insert a microSD card

1) Slide the

4

Release key upward to detach the part of the front

panel.

2) Hold the microSD card with the label side facing left and the

notched section up, and insert it into the slot until it clicks.

⿠To eject the card:

1) Push the card until it clicks and then remove your ﬁnger from the

card.

The card pops up so that you can pull it out with your ﬁngers.

1

2

10

English ñ 13

No. Name/ Motion

1

Disc insert slot

• A slot to insert a disc media.

2

G (Eject)

• Ejects the disc.

• Pressing for 1 second ejects the disc

forcibly.

3

s (Reset)

• If the unit or the connected unit fails

to operate properly, the unit returns

to initial settings when this button is

pressed (Instruction Manual P.151).

• If the SI function is turned on, this

indicator ﬂashes when the vehicle

ignition is oﬀ (Instruction Manual

P.126).

4

Release key

• Detaches the part of front panel.

5

HOME

• Displays the Home screen (P.16).

• Pressing for 1 second turns the power oﬀ.

• When the power oﬀ, turns the power on.

6

MENU

• Displays the option menu screen.

• Pressing for 1 second switches AV out

sources.

7

R, S (Vol)

• Adjusts volume.

8

6 (Back)

• Return to the previously viewed screen.

• Pressing for 1 second displays the Hands

Free screen (Instruction Manual

P.116).

9

Input jack

• An input jack for external device. (CA-

C3AV; Optional Accessory)

p

SD card slot

• A slot to insert an microSD card.

14 ñ English

Common Operation

Ñ General

There are some functions which can be operated

from most screens.

(Mixed Media Search)

Touch to display the Mixed Media Search screen.

(Quick menu)

Touch to display the quick menu. The content of the

menu are as follows.

: Displays the SETUP Menu screen.

: Displays the Audio Control Menu screen.

: Displays the control screen of current source.

Icon feature diﬀers depending on the source.

(RETURN)

Returns to previous screen.

Ñ List screen

There are some common function keys in the list

screens of most sources.

(Scroll)

Touch to scroll through texts on the display.

etc.

Touch keys with various functions are displayed here.

Displayed keys diﬀer depending on the current

audio source, status, etc.

For examples, see List screen (P.27) in the

Instruction Manual.

Ñ Flick scrolling

You can scroll the list screen by icking the screen

up/down or right/left.

English ñ 15

Detaching The Front Panel

You can detach the front panel to prevent theft.

Ñ DNN9250DAB/ DNR8025BT

1 Press the <0> button for 1 second to

open the front panel.

Then, detach the panel as the diagrams below.

2

3

1

4

⿠After detaching

1) Put the panel in the protective bag supplied

with the unit.

✎ NOTE

• The attaching plate closes automatically in about

10 seconds after the front panel is released.

Remove the panel before this happens. To prevent

deterioration, do not touch the terminals of the unit

and faceplate with your ﬁngers.

• If the terminals on the unit or faceplate get dirty,

wipe them with a clean soft dry cloth.

• For attaching the panel, see Attaching the front

panel (P.25).

Ñ DNN6250DAB

1 Slide the Release key upward to detach

the part of the front panel.

Then, detach the panel as the diagrams

below.

1

2

⿠After detaching

1) Hold the panel securely so as not to drop

it accidentally, and ﬁt it onto the attaching

plate until it is ﬁrmly locked.

1

2

✎ NOTE

• When detaching a part of the front panel, detach

it toward the front side as shown in the diagram

above. If it is detached upward, the front panel will

be broken.

• To prevent deterioration, do not touch the terminals

of the unit and front panel with your ﬁngers.

• If the terminals on the unit or front panel get dirty,

wipe them with a clean soft dry cloth.

16 ñ English

Login

1 Press the <HOME> button to turn the

power on.

2 Select the login user.

3 Enter the password.

(Password)

Enter the registered password.

If you selected Administrator or Guest, this screen is

not displayed.

[Auto Login?]

Checking this checkbox allows you to log in to the

system automatically from the next time.

[Login]

Log in to the system.

✎ NOTE

• If you forgot your password, create your new

password on the Route Collector site. http://www.

route-collector.com/

Operation on the Home Screen

1 Press the <HOME> button to display the

Home screen.

2 Flick the screen left or right to select

the Service panel, Media panel, Source

launcher panel, or Network contents

panel.

1 Service panel

Weather widget: Displays the weather forecast for

the selected region.

Network widget: Displays the schedule, SNS, or RSS.

2 Media panel

Now playing: Displays the title of the song being

played or the name of the station you are listening

to, and allows you to perform simple operations.

Media widget: Displays the Summary board that

shows the songs you marked with Like and the

playback history, and the Photo frame that shows

photos.

3 Source launcher panel

Allows you select a source.

4 Network contents panel

Allows you to select a network-related application.

English ñ 17

Ñ Source launcher panel

(Shortcut)

You can register sources you use frequently so that

you can start them quickly.

(All source list)

Displays all sources.

⿠All source list

(All source list)

You can scroll the list screen by ﬂicking the screen

up/down.

(Home)

Returns to the Source launcher panel.

⿠Moving or deleting of an icon on the

Source launcher panel

1) Touch and hold the icon.

2) Drag the icon to the desired position or

Recycle Bin.

⿠Adding of a shortcut icon to Source

launcher panel

1) Touch [ ] in Source launcher panel.

2) Touching the icon continuously to display

the Source launcher panel screen.

3) Drag the icon to an empty space.

How to Use the

Navigation System

(DNN9250DAB/ DNN6250DAB)

1

⿠DNN9250DAB

1) Press the <NAV> button to display the

navigation screen.

⿠DNN6250DAB

1) Press the <HOME> button.

2) Select the Source launcher panel.

3) Touch [

NAV].

(or)

Touch the information bar.

2 Operate the desired function from the

Main Menu screen.

1

2

3

4

5

1

GPS satellite strength.

2

Finds a destination.

18 ñ English

3

Views the map.

4

Uses the Apps such as ecoRoute and Help.

5

Adjusts the settings.

✎ NOTE

• You can get additional information about using the

navigation system from Help. To display Help, touch

[Apps] and then touch [Help].

• For more information about your navigation system,

download the latest version of the Owner’s Manual

from manual.kenwood.com/edition/im383

3 Enter your destination and start the

guidance.

⿠Finding points of interest

1) Touch [Where To?].

2) Select a category and a subcategory.

3) Select a destination.

4) Touch [Go!].

✎ NOTE

• To enter letters contained in the name, touch the

Search bar and enter the letters.

4 Follow your route to the destination.

✎ NOTICE

• The speed limit icon feature is for information

only and does not replace the driver’s

responsibility to abide by all posted speed limit

signs and to use safe driving judgment at all

times. Garmin and JVC KENWOOD will not be

responsible for any trac nes or citations that

you may receive for failing to follow all applicable

trac laws and signs.

Your route is marked with a magenta line. As you

travel, your navigation system guides you to your

destination with voice prompts, arrows on the map,

and directions at the top of the map. If you depart

from the original route, your navigation system

recalculates the route.

1

2

3

4

5

6

8

9

7

1

Views the Next Turn page or the junction view

page, when available.

2

Views the Turn List page.

3

Views the Where Am I? page.

4

Stops the currents route.

5

Displays traﬃc information on the route.

6

Returns to the Main Menu.

7

Displays a diﬀerent data ﬁeld.

8

Views the Trip Computer.

9

Displays more options.

✎ NOTE

• Touch and drag the map to view a diﬀerent area of

the map.

• A speed limit icon could appear as you travel on

major roadways.

⿠Adding a stop

1) While navigating a route, touch [ ] and

then touch [Where To?].

2) Search for the extra stop.

3) Touch [Go!].

4) Touch [Add to Active Route] to add this stop

before your ﬁnal destination.

⿠Taking a detour

1) While navigating a route, touch [ ].

2) Touch [

].

English ñ 19

Ñ Other Features

⿠Manually avoiding trac on your route

1) From the map, touch the traﬃc icon.

2) Touch [Traﬃc On Route].

3) If necessary, touch the arrows to view other

traﬃc delays on your route.

4) Touch [

] > [Avoid].

⿠Viewing the trac map

1) The traﬃc map shows color-coded traﬃc

ﬂow and delays on nearby.

⿠About trac

✎ NOTICE

• Trac service is not available in some areas

or countries.

• Garmin and JVC KENWOOD are not

responsible for the accuracy or timeliness of

the trac information.

• Your navigation system can receive trac

information using the built-in trac

receiver or a subscription to INRIX Trac

Service. The trac receiver must be in data

range of a station transmitting trac data

to receive trac information. The trac

subscription activates automatically after

your navigation system acquires satellite

signals while receiving trac signals from

the service provider. You can add other

subscriptions at any time. For information

about trac receivers and coverage areas,

go to www.garmin.com/kenwood.

⿠Updating the software

To update the navigation system software, you

must have a USB mass storage device and an

internet connection.

1) Go to www.garmin.com/Kenwood.

2) Find your model and select [Software

Updates] > [Download].

3) Read and accept the terms of the Software

License Agreement.

4) Follow the instructions on the Web site to

complete the installation of the software

update.

⿠Updating maps

You can purchase updated map data from

Garmin or ask your Kenwood dealer or Kenwood

service center for details.

1) Go to www.garmin.com/Kenwood.

2) Select [Order Map Updates] for your

Kenwood unit.

3) Follow the Web site instructions to update

your map.

How to Play Music

You can play audio les from music CD, disc media,

USB storage device and iPod.

✎ NOTE

• For details on playable ﬁle format, media format,

iPod model, etc., refer to the Instruction Manual.

(P.152)

• To connect with iPod/iPhone/Android the setting

is necessary. Refer to

iPod/ iPhone/ Android setup

(P.31).

1 Connect the media you want to play as

shown below.

Disc

DNN9250DAB/

DNR8025BT

1) Press the <G>

button to open the

front panel.

2) Insert the disc into

the slot.

The panel closes

automatically and

playback starts.

0

DNN6250DAB

1) Insert the disc into

the slot.

Playback starts.

⿠To eject the disc:

1) Press the <G> button.

iPod, USB device

1) Connect the device with each cable.

Playback starts.

20 ñ English

⿠To disconnect the device:

1) Touch [G] on the screen and disconnect the

device from the cable.

✎ NOTE

• It applies when you set the iPod/iPhone connection

with cable.

SD card

DNN9250DAB

1) Press the <G>

button for 1 second

to open the front

panel.

2) Hold the SD card as

the diagram below

and insert it into the

slot until it clicks.

Playback starts.

0

DNN6250DAB

1) Detach the front

panel and insert the

card.

2) Hold the microSD

card as the diagram

below and insert it

into the slot until it

clicks.

Playback starts.

⿠To remove:

1) Push the card until it clicks and then remove

your ﬁnger from the card.

The card pops up so that you can pull it out

with your ﬁngers.

2 Control the music you are listening to on

the source control screen.

The following symbols indicate the keys on the

screen.

The functions of the keys are the same despite the

diﬀerence of the source you are listening to.

Z

Touch [

]

⿠Basic operations from this screen

L

Plays or pauses.

I

Stops playing.

G

Disconnects the device.

E F

Searches the previous/next content.

E F or move the cursor in the center

bar

Fast forwards or Fast backwards (Disc media,

CD, USB device, SD card only):

Repeats current content.

Plays all contents in random order.

✎ NOTE

• For other operations, refer to the Instruction Manual.

• If desired key is not displayed in the multi-function

bar, touch the [

] to switch the menu.

3 Search the track/le you want to listen to.

⿠List search

1) Touch center of the screen.

The content list of the media being played

is displayed.

If the information of the current track only is

displayed, touch and hold [

] to switch

the list display.

⿠Rened search

1) Touch [ ].

2) Touch the desired reﬁnement method.

Page is loading ...

Kenwood DNN9150DAB Quick start guide

Kenwood DNN9150DAB Quick start guide

Related papers

Other documents