Electrolux ESPGL55.3 User manual
- Category
- Coffee making accessories
- Type
- User manual
This manual is also suitable for
For all service-centers one number – 0848 848 111
We guarantee that all products pruchased and operated in Switzerland have a 12 months warranted
guarantee, calculated from the date of delivery to the customer. It is important, that you produce your
receiptor warranty and invoice given at purchase. You must also follow the user manual for installation
and use of this product in order to use this warranty.
Technical development/changes not included.
Switch off the device immediately
According to this manual, only use the device to prepare coffee-drinks,
hot water and to warm up drinks using steam.
NEVER use device for other purposes then those described in this manual.
In case of ignorance of this manual/safety instructions, danger may occur,
caused by e.g. hot water, steam, voltage.
Installation (building in), connecting and putting in operation, should only be
executed by authorized professionals.
- Mains supply has to correspond with device-data
- Use only enclosed power cord or one of a similar type
- Recommandation: Attach the device through FI-switch
- Children and uninstructed persons cannot operate this device.
Device is dangerous for children.
- Place sieve-holder and turn it for correct fitting to the right until
the lever stays at a 90° to the device front
- Danger of burns on steam, hot water, and in the operating area of the device
around the steam-nozzle, carrier-circle and top cover plate, e.g. while
touching the bolt button
- Never direct hot water/ steam onto parts of the body (danger of burns)
- Hot water/steam-nozzle gets warm, only touch burns protection!
- While operating the hot water / steam nozzle, dive it deeply into cup/liquid,
otherwise hot water/steam could splash
- After taking steam: for coffee/ hot water preparation, first cool down system,
otherwise strong steam-flow can come up (see: cooling down)
- Do not put any items into device - holes - risk of electric shock
- Do not clamp mains - cords/ plugs, do not touch with hot/sharp items,
do not pull out cord etc.
- Before cleaning, switch off the device and let cool down for at least 20 min.
- Do not splash water on the device, do not dive it into water
- Observe the user manual of the producer of descaling agent
- Do not use device with malfunction, suspicion on defect, etc.
Switch off immediately.
- Repair/service /maintenance only at Electrolux-Customer service
- Do not use device when mains-cord is defected. To avoid danger, only
let Electrolux professionals change mains cord
- Do not introduce items into the holes, do not unscrew any parts of the
device, danger of electrical chock
- For safety reasons only use original spare parts and accessories
- Package is recycable
- Unplug device, take of mains cord. Bring separated device and mains cord
to the public dispose or to customer service
4127 Birsfelden
Hauptstrasse 52
3063 Ittigen/Bern
Ey 5
1028 Préverenges
Le Trési 6
Zürich/Mägenwil
5506 Mägenwil
Industriestrasse 10
1950 Sion
Rue de la Piscine
9000 St. Gallen
Vonwilstrasse 15
8604 Volketswil
Hölzliwisenstrasse 12
7000 Chur
Comercialstrasse 19
6032 Emmen
Buholzstrasse 1
6916 Grancia
Zona Industriale E
If everything YES and still defect, then
5
Page
6
Page
7
Page
ESP GL55
Built-in coffee machine
User manual
Operate the device after heaving read this user manual.
Please do note the safety instructions in this manual. To ensure, that you took note
of this user maual, please send the filled guarantee certificate tot the service center
in Mägenwil. Please do give this manual to all further users.
Clean with soft, clean
and wet lycra-cloth.
Front of the device
- no hard/ agressiv cleaner
- no steel-wool/pan scrourers
Remove drip tray
(empty regularly)
Rinse with warm
water
Clean with warm
water after every
usage
1. Pull out tubes
2. Remove water
container
Clean with warm
water
Drip tray
Sieve, Sieve-holder/ring
Water container
Descaling of coffee- and hot water system
or
Steam nozzle
Clean tube and nozzle with
warm water and lycra-cloth
after every usage
1x weekly
Precaution
hot!
Change BRITA-filter
every 6 weeks
When replacing
water container,
insert tubes
properly
a) add 2 dl of citric acide
or descaling agent
- Put on sieveholder
(without filling in of
grinded coffee!)
- Place a receptacle
Take coffee and
hot water in turns
until
Empty left water from container, rinse,
place new Brita filter and fill in with
fresh water
Repeat step 4 to
free device of
descaling reminds
b) Remove Brita-filter,
Fill water
container: 2 L
Descale device every 3 months and replace BRITA-filter.
Pull out/Pull in of the device, see page 1
Emergeny
ONLY device
Danger
Installation
TSM SUCCESS MANUAL
®
- safe to use - easy to understand due to TSM
®
-Total Security Management and ergonomic communication
®
This TSM SUCCESS MANUAL® has been examined by Electrosuisse for conformity with the safety-
relevant standards, and has been analysed by an application-oriented risk analysis for the
completeness and correctness of the indications for a safe use of the appliance. Thereby we assume
a use with which can be reckoned based on common-sense.
Technical Data
Guarantee
Customer service
Cleaning and Servicing
Mains supply
Operating
Cleaning
Descaling
Defect
Spare parts/
Accessories
Dispose
Net weight: 19 kg
Voltage supply: 230 V
Fuse: 10 Amp.
Power...
...total: 1150 W
...of heating system: 1000 W
Dimensions of the device
H 37,8/B 54,6 /T 53,5 cm (SMS 3/6)
H 37,8/B 59,6 /T 53,5 cm (Euronorm)
Device data
Model identification:
see plate on right side of
machine:
The customer service needs
this information in case of any
question/order!
3
4
5
clean in
dish-washer
1
2
Clean seal on
sieveholder with
a brush regurarly
Grinding unit
Clean coffee bean container
and funnel regularly with brush
and vacuum cleaner
Precaution
hot!
6
H 38,1/B 55,0 /T 55,0 cm (SMS 3/6)
H 38,1/B 560-568 /T 55,0 cm (Euronorm)
Built-in dimensions
Troubleshooting
Was the water tank
being filled in?
This device complies with the EU-Norms and directives:
EN 60335-1 (Aug. 1995 - Household and similar electrical appliances - Safety)
EN 60335-2-15 (April 1996 - Particular requirements for appliances for heating liquids)
55014-1:2000+A1:2001
55014-2:1997+ A1:2001
61000-3-2:2000
61000-3-3:1995+A1:2001
2
1
a)
b)
- while cleaning don't move circulary,
otherwise the surface gets damaged
ESP GL60
Are device-plug and
power cord plugged in?
PNC: .....................................
Model: .....................................
Serial N.: .....................................
Safety instructions
Pull in
Pull out
Filling of coffee and water
Tips for superb coffee
1
Page
2
Page
3
Page
4
Page
Sieve for
1 cup or
coffee-bag
2 Sieveholder
Outflow for
2 cups
BRITA filter
Outflow for
1 cup
Sieve for
2 cups
De-aerate before 1
st
usage;
see page 4 COOLING
and cleaning see page 5!
1. Push bolt
2. Pull out device
by pulling on
knob
Put Brita filter in
water for 20 min.
(see Notice)
1. Remove cover
2. Fill with beans
1. Pull in the
machine
2. Press button
(locking)
always keep clean;
rinse with hot water after every usage
Turning knob for hot water /steam
On/Off switch
Accessories
Coffee
Hot water
Light on/off
Temperature indicator
Choice of coffee preparation
Steam
Fill-in-water indicator
Prepare drinks
345678910
a) Grind beans; Touch
grinding unit button
or
b)use coffee-bag portion
(1 portion=1 cup)
a)
b)
or
Press powder 1. fix
2. pull the lever
Place cup(s) OK when indicator
switches off
Press coffee
preparation
Remove cup(s) Knock-out coffee
ground in grounds
container
Press button
(Steam temperature
achieved when
indicator switches
off)
Let left water flow
out in a receptacle
1
2
3
If changes in coffee results
desired: see PROF.-TIPS
456
Dive deep in liquid open Warm up liquid
with rotations
Close until
stops
(COOLING device* )
Prepare coffee
(see above)
Cover with
milk froth
123
Fill receptacle with
3 cm of water and
dive in
1. Press button
2. Open turning
knob
1. Wait until aut.
stop (stop proces:
press button)
2. Close turning knob
Temperature is ok
when water flow is
regular!
123 4
23 4
Place receptacle Open Press button for hot
water preparation
(Automatic dosage on
programmed quantity)
Close up to
stop
Precaution
hot!
To stop proces:
press button
again!
Precaution
Might Splash !
Precaution, steam
might come first!
1
Execute
step 1+2
Press button hot water
preparation until
indicator flashes
Leave when water
flows
Press button again
when quantity OK
(Water quantity is
stored)
Precaution
hot!
TSM S
UCCESS
M
ANUAL
® -
©
030203 by Electrosuisse
Close turning knob
until stop
5
Fill up with fresh
water; approx. 2,2 l
(Refill indicator)
TIPS
The more you press the
powder, the stronger
coffee and the better froth
you achieve
Lever should stand approx.
90° to the device front
TIPS
Use only heat
resistant glas!
TIPS
Grounds
container
Cleaning
brush
Switch on device
To stop proces:
press button again!
*If directly after steam-preparation
another program is desired, the COOLING
must take place.
To stop process:
press button again!
2
1
2
1
2
1
Switch off device Keep button steam Press Button ON in the meantime Leave both buttons OK (no confirmation is displayed!)
Execute
Step 1-7
of «Coffee
preparation»
The quantity
is stored!
(see. page 1)
1 Espresso or
1 Coffee
Programm
Choose
1
- For stronger coffee
- With dryer climat
- For weaker coffee
- With high humidity
leave when
coffee flows
Press button
until indicator flashes
Press button again
when quantity OK
1.
2.
3.
2
3
Press grinding button with sieveholder,
until desired coffee quantity is reached
Leave grinding button
(quantity is stored)
Starts after 10 sec.!
2
3
Coarse
Fine
Sieveholder for
1 cup grinded
coffee or
one coffee-bag
Sieveholder for
2 cups
grinded coffee
2
or
Choose program
1
2 Coffee
1 Espresso
double or
2 Espressi
1 Coffee
To avoid the frothy milk
becoming dry, take off the
tube and clean it with
warm water and lycra-cloth
after every usage.
1
2
1
2
2
1
down
Water container
Coffee bean container
Sieveholder setting
Steam-emission nozzle
Pull out bolt
Drip tray
BRITA-filter
Turning knob for
grinding degree
Burns protection -->
Hot!
Touch only here!
Start button for grinding unit
Press plunger
Grinded coffee funnel
Just lay on portion bag (do not press)!
Leave sieveholder inserted to keep it warm
To warm up the cup and to reject powder remains,
take water without coffee powder (Coffee preparation
button)
Portion bag:
not hard-pressed!
Pull in
Pull out
W
A
R
M
U
P
W
I
T
H
S
T
E
A
M
P
R
E
P
A
R
E
C
O
F
F
E
E
P
R
E
P
A
R
E
H
O
T
W
A
T
E
R
CAPPUCCINO
COOLING
CHANGE WATER
QUANTITY
P
R
O
F
.
-
T
I
P
S
RESET TO FACTORY SETTINGS
CHANGE COFFEE
QUANTITY
CHANGE GRINDING
DEGREE
Pull out
Pull in
CHANGE POWDER
QUANTITY
2
Page
3
Page
4
Page
Prepare drinks
345678910
a) Grind beans; Touch
grinding unit button
or
b)use coffee-bag portion
(1 portion=1 cup)
a)
b)
or
Press powder 1. fix
2. pull the lever
Place cup(s) OK when indicator
switches off
Press coffee
preparation
Remove cup(s) Knock-out coffee
ground in grounds
container
Press button
(Steam temperature
achieved when
indicator switches
off)
Let left water flow
out in a receptacle
1
2
3
If changes in coffee results
desired: see PROF.-TIPS
456
Dive deep in liquid open Warm up liquid
with rotations
Close until
stops
(COOLING device* )
Prepare coffee
(see above)
Cover with
milk froth
123
Fill receptacle with
3 cm of water and
dive in
1. Press button
2. Open turning
knob
1. Wait until aut.
stop (stop proces:
press button)
2. Close turning knob
Temperature is ok
when water flow is
regular!
123 4
23 4
Place receptacle Open Press button for hot
water preparation
(Automatic dosage on
programmed quantity)
Close up to
stop
Precaution
hot!
To stop proces:
press button
again!
Precaution
Might Splash !
Precaution, steam
might come first!
1
Execute
step 1+2
Press button hot water
preparation until
indicator flashes
Leave when water
flows
Press button again
when quantity OK
(Water quantity is
stored)
Precaution
hot!
TSM SUCCESS MANUAL® - ©
030203 by Electrosuisse
Close turning knob
until stop
5
TIPS
The more you press the
powder, the stronger
coffee and the better froth
you achieve
Lever should stand approx.
90° to the device front
TIPS
Use only heat
resistant glas!
TIPS
Switch on device
To stop proces:
press button again!
*If directly after steam-preparation
another program is desired, the COOLING
must take place.
To stop process:
press button again!
2
1
2
1
2
1
Switch off device Keep button steam Press Button ON in the meantime Leave both buttons OK (no confirmation is displayed!)
Execute
Step 1-7
of «Coffee
preparation»
The quantity
is stored!
(see. page 1)
1 Espresso or
1 Coffee
Programm
Choose
1
- For stronger coffee
- With dryer climat
- For weaker coffee
- With high humidity
leave when
coffee flows
Press button
until indicator flashes
Press button again
when quantity OK
1.
2.
3.
2
3
Press grinding button with sieveholder,
until desired coffee quantity is reached
Leave grinding button
(quantity is stored)
Starts after 10 sec.!
2
3
Coarse
Fine
Sieveholder for
1 cup grinded
coffee or
one coffee-bag
Sieveholder for
2 cups
grinded coffee
2
or
Choose program
1
2 Coffee
1 Espresso
double or
2 Espressi
1 Coffee
To avoid the frothy milk
becoming dry, take off the
tube and clean it with
warm water and lycra-cloth
after every usage.
down
Portion bag:
not hard-pressed!
W
A
R
M
U
P
W
I
T
H
S
T
E
A
M
P
R
E
P
A
R
E
C
O
F
F
E
E
P
R
E
P
A
R
E
H
O
T
W
A
T
E
R
CAPPUCCINO
COOLING
CHANGE WATER
QUANTITY
P
R
O
F
.
-
T
I
P
S
RESET TO FACTORY SETTINGS
CHANGE COFFEE
QUANTITY
CHANGE GRINDING
DEGREE
Pull out
Pull in
CHANGE POWDER
QUANTITY
For all service-centers one number – 0848 848 111
We guarantee that all products pruchased and operated in Switzerland have a 12 months warranted
guarantee, calculated from the date of delivery to the customer. It is important, that you produce your
receiptor warranty and invoice given at purchase. You must also follow the user manual for installation
and use of this product in order to use this warranty.
Technical development/changes not included.
Switch off the device immediately
According to this manual, only use the device to prepare coffee-drinks,
hot water and to warm up drinks using steam.
NEVER use device for other purposes then those described in this manual.
In case of ignorance of this manual/safety instructions, danger may occur,
caused by e.g. hot water, steam, voltage.
Installation (building in), connecting and putting in operation, should only be
executed by authorized professionals.
- Mains supply has to correspond with device-data
- Use only enclosed power cord or one of a similar type
- Recommandation: Attach the device through FI-switch
- Children and uninstructed persons cannot operate this device.
Device is dangerous for children.
- Place sieve-holder and turn it for correct fitting to the right until
the lever stays at a 90° to the device front
- Danger of burns on steam, hot water, and in the operating area of the device
around the steam-nozzle, carrier-circle and top cover plate, e.g. while
touching the bolt button
- Never direct hot water/ steam onto parts of the body (danger of burns)
- Hot water/steam-nozzle gets warm, only touch burns protection!
- While operating the hot water / steam nozzle, dive it deeply into cup/liquid,
otherwise hot water/steam could splash
- After taking steam: for coffee/ hot water preparation, first cool down system,
otherwise strong steam-flow can come up (see: cooling down)
- Do not put any items into device - holes - risk of electric shock
- Do not clamp mains - cords/ plugs, do not touch with hot/sharp items,
do not pull out cord etc.
- Before cleaning, switch off the device and let cool down for at least 20 min.
- Do not splash water on the device, do not dive it into water
- Observe the user manual of the producer of descaling agent
- Do not use device with malfunction, suspicion on defect, etc.
Switch off immediately.
- Repair/service /maintenance only at Electrolux-Customer service
- Do not use device when mains-cord is defected. To avoid danger, only
let Electrolux professionals change mains cord
- Do not introduce items into the holes, do not unscrew any parts of the
device, danger of electrical chock
- For safety reasons only use original spare parts and accessories
- Package is recycable
- Unplug device, take of mains cord. Bring separated device and mains cord
to the public dispose or to customer service
4127 Birsfelden
Hauptstrasse 52
3063 Ittigen/Bern
Ey 5
1028 Préverenges
Le Trési 6
Zürich/Mägenwil
5506 Mägenwil
Industriestrasse 10
1950 Sion
Rue de la Piscine
9000 St. Gallen
Vonwilstrasse 15
8604 Volketswil
Hölzliwisenstrasse 12
7000 Chur
Comercialstrasse 19
6032 Emmen
Buholzstrasse 1
6916 Grancia
Zona Industriale E
If everything YES and still defect, then
5
Page
6
Page
7
Page
ESP GL55
Built-in coffee machine
User manual
Operate the device after heaving read this user manual.
Please do note the safety instructions in this manual. To ensure, that you took note
of this user maual, please send the filled guarantee certificate tot the service center
in Mägenwil. Please do give this manual to all further users.
Clean with soft, clean
and wet lycra-cloth.
Front of the device
- no hard/ agressiv cleaner
- no steel-wool/pan scrourers
Remove drip tray
(empty regularly)
Rinse with warm
water
Clean with warm
water after every
usage
1. Pull out tubes
2. Remove water
container
Clean with warm
water
Drip tray
Sieve, Sieve-holder/ring
Water container
Descaling of coffee- and hot water system
or
Steam nozzle
Clean tube and nozzle with
warm water and lycra-cloth
after every usage
1x weekly
Precaution
hot!
Change BRITA-filter
every 6 weeks
When replacing
water container,
insert tubes
properly
a) add 2 dl of citric acide
or descaling agent
- Put on sieveholder
(without filling in of
grinded coffee!)
- Place a receptacle
Take coffee and
hot water in turns
until
Empty left water from container, rinse,
place new Brita filter and fill in with
fresh water
Repeat step 4 to
free device of
descaling reminds
b) Remove Brita-filter,
Fill water
container: 2 L
Descale device every 3 months and replace BRITA-filter.
Pull out/Pull in of the device, see page 1
Emergeny
ONLY device
Danger
Installation
TSM SUCCESS MANUAL
®
- safe to use - easy to understand due to TSM
®
-Total Security Management and ergonomic communication
®
This TSM SUCCESS MANUAL® has been examined by Electrosuisse for conformity with the safety-
relevant standards, and has been analysed by an application-oriented risk analysis for the
completeness and correctness of the indications for a safe use of the appliance. Thereby we assume
a use with which can be reckoned based on common-sense.
Technical Data
Guarantee
Customer service
Cleaning and Servicing
Mains supply
Operating
Cleaning
Descaling
Defect
Spare parts/
Accessories
Dispose
Net weight: 19 kg
Voltage supply: 230 V
Fuse: 10 Amp.
Power...
...total: 1150 W
...of heating system: 1000 W
Dimensions of the device
H 37,8/B 54,6 /T 53,5 cm (SMS 3/6)
H 37,8/B 59,6 /T 53,5 cm (Euronorm)
Device data
Model identification:
see plate on right side of
machine:
The customer service needs
this information in case of any
question/order!
3
4
5
clean in
dish-washer
1
2
Clean seal on
sieveholder with
a brush regurarly
Grinding unit
Clean coffee bean container
and funnel regularly with brush
and vacuum cleaner
Precaution
hot!
6
H 38,1/B 55,0 /T 55,0 cm (SMS 3/6)
H 38,1/B 560-568 /T 55,0 cm (Euronorm)
Built-in dimensions
Troubleshooting
Was the water tank
being filled in?
This device complies with the EU-Norms and directives:
EN 60335-1 (Aug. 1995 - Household and similar electrical appliances - Safety)
EN 60335-2-15 (April 1996 - Particular requirements for appliances for heating liquids)
55014-1:2000+A1:2001
55014-2:1997+ A1:2001
61000-3-2:2000
61000-3-3:1995+A1:2001
2
1
a)
b)
- while cleaning don't move circulary,
otherwise the surface gets damaged
ESP GL60
Are device-plug and
power cord plugged in?
PNC: .....................................
Model: .....................................
Serial N.: .....................................
Safety instructions
Pull in
Pull out
For all service-centers one number – 0848 848 111
We guarantee that all products pruchased and operated in Switzerland have a 12 months warranted
guarantee, calculated from the date of delivery to the customer. It is important, that you produce your
receiptor warranty and invoice given at purchase. You must also follow the user manual for installation
and use of this product in order to use this warranty.
Technical development/changes not included.
Switch off the device immediately
According to this manual, only use the device to prepare coffee-drinks,
hot water and to warm up drinks using steam.
NEVER use device for other purposes then those described in this manual.
In case of ignorance of this manual/safety instructions, danger may occur,
caused by e.g. hot water, steam, voltage.
Installation (building in), connecting and putting in operation, should only be
executed by authorized professionals.
- Mains supply has to correspond with device-data
- Use only enclosed power cord or one of a similar type
- Recommandation: Attach the device through FI-switch
- Children and uninstructed persons cannot operate this device.
Device is dangerous for children.
- Place sieve-holder and turn it for correct fitting to the right until
the lever stays at a 90° to the device front
- Danger of burns on steam, hot water, and in the operating area of the device
around the steam-nozzle, carrier-circle and top cover plate, e.g. while
touching the bolt button
- Never direct hot water/ steam onto parts of the body (danger of burns)
- Hot water/steam-nozzle gets warm, only touch burns protection!
- While operating the hot water / steam nozzle, dive it deeply into cup/liquid,
otherwise hot water/steam could splash
- After taking steam: for coffee/ hot water preparation, first cool down system,
otherwise strong steam-flow can come up (see: cooling down)
- Do not put any items into device - holes - risk of electric shock
- Do not clamp mains - cords/ plugs, do not touch with hot/sharp items,
do not pull out cord etc.
- Before cleaning, switch off the device and let cool down for at least 20 min.
- Do not splash water on the device, do not dive it into water
- Observe the user manual of the producer of descaling agent
- Do not use device with malfunction, suspicion on defect, etc.
Switch off immediately.
- Repair/service /maintenance only at Electrolux-Customer service
- Do not use device when mains-cord is defected. To avoid danger, only
let Electrolux professionals change mains cord
- Do not introduce items into the holes, do not unscrew any parts of the
device, danger of electrical chock
- For safety reasons only use original spare parts and accessories
- Package is recycable
- Unplug device, take of mains cord. Bring separated device and mains cord
to the public dispose or to customer service
4127 Birsfelden
Hauptstrasse 52
3063 Ittigen/Bern
Ey 5
1028 Préverenges
Le Trési 6
Zürich/Mägenwil
5506 Mägenwil
Industriestrasse 10
1950 Sion
Rue de la Piscine
9000 St. Gallen
Vonwilstrasse 15
8604 Volketswil
Hölzliwisenstrasse 12
7000 Chur
Comercialstrasse 19
6032 Emmen
Buholzstrasse 1
6916 Grancia
Zona Industriale E
If everything YES and still defect, then
5
Page
6
Page
7
Page
ESP GL55
Built-in coffee machine
User manual
Operate the device after heaving read this user manual.
Please do note the safety instructions in this manual. To ensure, that you took note
of this user maual, please send the filled guarantee certificate tot the service center
in Mägenwil. Please do give this manual to all further users.
Clean with soft, clean
and wet lycra-cloth.
Front of the device
- no hard/ agressiv cleaner
- no steel-wool/pan scrourers
Remove drip tray
(empty regularly)
Rinse with warm
water
Clean with warm
water after every
usage
1. Pull out tubes
2. Remove water
container
Clean with warm
water
Drip tray
Sieve, Sieve-holder/ring
Water container
Descaling of coffee- and hot water system
or
Steam nozzle
Clean tube and nozzle with
warm water and lycra-cloth
after every usage
1x weekly
Precaution
hot!
Change BRITA-filter
every 6 weeks
When replacing
water container,
insert tubes
properly
a) add 2 dl of citric acide
or descaling agent
- Put on sieveholder
(without filling in of
grinded coffee!)
- Place a receptacle
Take coffee and
hot water in turns
until
Empty left water from container, rinse,
place new Brita filter and fill in with
fresh water
Repeat step 4 to
free device of
descaling reminds
b) Remove Brita-filter,
Fill water
container: 2 L
Descale device every 3 months and replace BRITA-filter.
Pull out/Pull in of the device, see page 1
Emergeny
ONLY device
Danger
Installation
TSM SUCCESS MANUAL
®
- safe to use - easy to understand due to TSM
®
-Total Security Management and ergonomic communication
®
This TSM SUCCESS MANUAL® has been examined by Electrosuisse for conformity with the safety-
relevant standards, and has been analysed by an application-oriented risk analysis for the
completeness and correctness of the indications for a safe use of the appliance. Thereby we assume
a use with which can be reckoned based on common-sense.
Technical Data
Guarantee
Customer service
Cleaning and Servicing
Mains supply
Operating
Cleaning
Descaling
Defect
Spare parts/
Accessories
Dispose
Net weight: 19 kg
Voltage supply: 230 V
Fuse: 10 Amp.
Power...
...total: 1150 W
...of heating system: 1000 W
Dimensions of the device
H 37,8/B 54,6 /T 53,5 cm (SMS 3/6)
H 37,8/B 59,6 /T 53,5 cm (Euronorm)
Device data
Model identification:
see plate on right side of
machine:
The customer service needs
this information in case of any
question/order!
3
4
5
clean in
dish-washer
1
2
Clean seal on
sieveholder with
a brush regurarly
Grinding unit
Clean coffee bean container
and funnel regularly with brush
and vacuum cleaner
Precaution
hot!
6
H 38,1/B 55,0 /T 55,0 cm (SMS 3/6)
H 38,1/B 560-568 /T 55,0 cm (Euronorm)
Built-in dimensions
Troubleshooting
Was the water tank
being filled in?
This device complies with the EU-Norms and directives:
EN 60335-1 (Aug. 1995 - Household and similar electrical appliances - Safety)
EN 60335-2-15 (April 1996 - Particular requirements for appliances for heating liquids)
55014-1:2000+A1:2001
55014-2:1997+ A1:2001
61000-3-2:2000
61000-3-3:1995+A1:2001
2
1
a)
b)
- while cleaning don't move circulary,
otherwise the surface gets damaged
ESP GL60
Are device-plug and
power cord plugged in?
PNC: .....................................
Model: .....................................
Serial N.: .....................................
Safety instructions
Pull in
Pull out
For all service-centers one number – 0848 848 111
We guarantee that all products pruchased and operated in Switzerland have a 12 months warranted
guarantee, calculated from the date of delivery to the customer. It is important, that you produce your
receiptor warranty and invoice given at purchase. You must also follow the user manual for installation
and use of this product in order to use this warranty.
Technical development/changes not included.
Switch off the device immediately
According to this manual, only use the device to prepare coffee-drinks,
hot water and to warm up drinks using steam.
NEVER use device for other purposes then those described in this manual.
In case of ignorance of this manual/safety instructions, danger may occur,
caused by e.g. hot water, steam, voltage.
Installation (building in), connecting and putting in operation, should only be
executed by authorized professionals.
- Mains supply has to correspond with device-data
- Use only enclosed power cord or one of a similar type
- Recommandation: Attach the device through FI-switch
- Children and uninstructed persons cannot operate this device.
Device is dangerous for children.
- Place sieve-holder and turn it for correct fitting to the right until
the lever stays at a 90° to the device front
- Danger of burns on steam, hot water, and in the operating area of the device
around the steam-nozzle, carrier-circle and top cover plate, e.g. while
touching the bolt button
- Never direct hot water/ steam onto parts of the body (danger of burns)
- Hot water/steam-nozzle gets warm, only touch burns protection!
- While operating the hot water / steam nozzle, dive it deeply into cup/liquid,
otherwise hot water/steam could splash
- After taking steam: for coffee/ hot water preparation, first cool down system,
otherwise strong steam-flow can come up (see: cooling down)
- Do not put any items into device - holes - risk of electric shock
- Do not clamp mains - cords/ plugs, do not touch with hot/sharp items,
do not pull out cord etc.
- Before cleaning, switch off the device and let cool down for at least 20 min.
- Do not splash water on the device, do not dive it into water
- Observe the user manual of the producer of descaling agent
- Do not use device with malfunction, suspicion on defect, etc.
Switch off immediately.
- Repair/service /maintenance only at Electrolux-Customer service
- Do not use device when mains-cord is defected. To avoid danger, only
let Electrolux professionals change mains cord
- Do not introduce items into the holes, do not unscrew any parts of the
device, danger of electrical chock
- For safety reasons only use original spare parts and accessories
- Package is recycable
- Unplug device, take of mains cord. Bring separated device and mains cord
to the public dispose or to customer service
4127 Birsfelden
Hauptstrasse 52
3063 Ittigen/Bern
Ey 5
1028 Préverenges
Le Trési 6
Zürich/Mägenwil
5506 Mägenwil
Industriestrasse 10
1950 Sion
Rue de la Piscine
9000 St. Gallen
Vonwilstrasse 15
8604 Volketswil
Hölzliwisenstrasse 12
7000 Chur
Comercialstrasse 19
6032 Emmen
Buholzstrasse 1
6916 Grancia
Zona Industriale E
If everything YES and still defect, then
5
Page
6
Page
7
Page
ESP GL55
Built-in coffee machine
User manual
Operate the device after heaving read this user manual.
Please do note the safety instructions in this manual. To ensure, that you took note
of this user maual, please send the filled guarantee certificate tot the service center
in Mägenwil. Please do give this manual to all further users.
Clean with soft, clean
and wet lycra-cloth.
Front of the device
- no hard/ agressiv cleaner
- no steel-wool/pan scrourers
Remove drip tray
(empty regularly)
Rinse with warm
water
Clean with warm
water after every
usage
1. Pull out tubes
2. Remove water
container
Clean with warm
water
Drip tray
Sieve, Sieve-holder/ring
Water container
Descaling of coffee- and hot water system
or
Steam nozzle
Clean tube and nozzle with
warm water and lycra-cloth
after every usage
1x weekly
Precaution
hot!
Change BRITA-filter
every 6 weeks
When replacing
water container,
insert tubes
properly
a) add 2 dl of citric acide
or descaling agent
- Put on sieveholder
(without filling in of
grinded coffee!)
- Place a receptacle
Take coffee and
hot water in turns
until
Empty left water from container, rinse,
place new Brita filter and fill in with
fresh water
Repeat step 4 to
free device of
descaling reminds
b) Remove Brita-filter,
Fill water
container: 2 L
Descale device every 3 months and replace BRITA-filter.
Pull out/Pull in of the device, see page 1
Emergeny
ONLY device
Danger
Installation
TSM SUCCESS MANUAL
®
- safe to use - easy to understand due to TSM
®
-Total Security Management and ergonomic communication
®
This TSM SUCCESS MANUAL® has been examined by Electrosuisse for conformity with the safety-
relevant standards, and has been analysed by an application-oriented risk analysis for the
completeness and correctness of the indications for a safe use of the appliance. Thereby we assume
a use with which can be reckoned based on common-sense.
Technical Data
Guarantee
Customer service
Cleaning and Servicing
Mains supply
Operating
Cleaning
Descaling
Defect
Spare parts/
Accessories
Dispose
Net weight: 19 kg
Voltage supply: 230 V
Fuse: 10 Amp.
Power...
...total: 1150 W
...of heating system: 1000 W
Dimensions of the device
H 37,8/B 54,6 /T 53,5 cm (SMS 3/6)
H 37,8/B 59,6 /T 53,5 cm (Euronorm)
Device data
Model identification:
see plate on right side of
machine:
The customer service needs
this information in case of any
question/order!
3
4
5
clean in
dish-washer
1
2
Clean seal on
sieveholder with
a brush regurarly
Grinding unit
Clean coffee bean container
and funnel regularly with brush
and vacuum cleaner
Precaution
hot!
6
H 38,1/B 55,0 /T 55,0 cm (SMS 3/6)
H 38,1/B 560-568 /T 55,0 cm (Euronorm)
Built-in dimensions
Troubleshooting
Was the water tank
being filled in?
This device complies with the EU-Norms and directives:
EN 60335-1 (Aug. 1995 - Household and similar electrical appliances - Safety)
EN 60335-2-15 (April 1996 - Particular requirements for appliances for heating liquids)
55014-1:2000+A1:2001
55014-2:1997+ A1:2001
61000-3-2:2000
61000-3-3:1995+A1:2001
2
1
a)
b)
- while cleaning don't move circulary,
otherwise the surface gets damaged
ESP GL60
Are device-plug and
power cord plugged in?
PNC: .....................................
Model: .....................................
Serial N.: .....................................
Safety instructions
Pull in
Pull out
-
1
-
2
-
3
-
4
-
5
-
6
Electrolux ESPGL55.3 User manual
- Category
- Coffee making accessories
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Bosch PHS 5263 Datasheet
-
Kuppersbusch USA café profi EKV 6600.0 User manual
-
Krups XP1500 User manual
-
Sunbeam Cafe Barista EM8800 User manual
-
Bosch THD20 Series User manual
-
-
Zanussi ZCOF636X User manual
-
Schaerer CFN-EN User manual
-
WMF Presto 1400 Series User manual
-
