Expandable Digital Cordless Answering System
with 3 Handsets
Model No. KX-TG9348
This model includes:
– a base unit with two handsets: Model No. KX-TG9342 (Handset’s Part No.:
KX-TGA931)
– one drop and splash resistant handset (Part No.: KX-TGA936)
The instructions for all units supplied here are contained in the operating
instructions of the KX-TG9342.
Please read the operating instructions before using these units.
Product information
Note:
LThe handsets have been pre-registered to work with the base unit.
Model No.
Base unit Handset
Part No. Part No. Quantity
KX-TG9348 KX-TG9341 KX-TGA931 2
KX-TGA936 1
KX-TG9348
KX-TG9342 KX-TGA936
Handset’s Part No. is KX-TGA931.
Drop and splash resistant handset (KX-TGA936 only)
This design protects from splashes and occasional dropping.
PNQW1046ZA DM0208PY0
TG9348(e).fm Page 1 Monday, January 28, 2008 4:22 PM
– 2 –
Accessory information
Supplied accessories
*1 See the operating instructions for replacement battery information.
*2 The handset cover comes attached to the handset.
Expanding your phone system
You can expand your phone system by registering optional handsets (max. 6) to a
single base unit.
Optional handset feature overview
The features of the following handsets depend on the base unit to which the handset
is registered.
*1 KX-TGA930 has the same feature as the supplied handset (KX-TGA931: not
available as an option) and their difference is the color of dial keypad (black) only.
*2 KX-TGA935 has the same feature as the supplied handset (KX-TGA936: not
available as an option).
No. Accessory item/Order number Quantity
1 AC adaptor for base unit/PQLV207T 1
2 Telephone line cord/PQJA10075Z 1
3 Rechargeable batteries
*1
6
4 Handset cover
*2
/
PNYNTGA936BR (KX-TGA936)
1
PNYNTGA430BR (KX-TGA931) 2
5 Belt clip/
PNKE1011Z1 (KX-TGA936)
1
PNKE1004Z1 (KX-TGA931) 2
6 Charger/
PNLC1003ZB (KX-TGA936)
1
PNLC1001YT (KX-TGA931) 1
7 AC adaptor for charger/PQLV209T 2
Feature
Model No.
KX-TGA630 KX-TGA930
*1
KX-TGA935
*2
Headset jack – rr
Belt clip – rr
Drop and splash resistance – – r
TG9348(e).fm Page 2 Monday, January 28, 2008 4:22 PM
– 3 –
Controls
See “Controls” in the operating
instructions of the KX-TG9342 product.
KX-TGA936 handset
A Speaker
B {MENU}
C Soft keys
D Headset jack
E {C} (TALK)
F {s} (SP-PHONE: Speakerphone)
G Dial keypad
({*}: TONE)
H {FLASH} {CALL WAIT}
I Charge indicator
Ringer indicator
Message indicator
J Receiver
K Display
L {OFF}
M Navigator key ({^}/{V}/{<}/{>})
? (Volume: {^}/{V})
N {REDIAL} {PAUSE}
O {HOLD} {INTERCOM}
P Microphone
Q Charge contacts
Splash resistance (KX-TGA936
handset only)
The handset is designed to be splash-
resistant. You can use the handset with
wet hands.
LDo not immerse in water or leave
under running water.
LKeep the handset away from salt
water.
LAvoid exposure to prolonged high
humidity.
LSince water in headset jack may
cause damage, close the headset
jack cover when the optional headset
is not in use. When the optional
headset is connected, do not use the
handset with wet hands.
LIf the handset is wet, wipe with a soft
dry cloth.
LThe base unit/charger is not designed
to be splash resistant. Do not place
the handset on the base unit/charger
if the handset is wet.
Drop resistance (KX-TGA936
handset only)
The handset is designed to be drop-
resistant, however, it should not be
thrown or stepped on.
J
M
N
C
L
I
O
P
Q
C
D
E
F
G
H
A
B
K
TG9348(e).fm Page 3 Monday, January 28, 2008 4:22 PM
– 4 –
Battery installation
Important:
LUse the supplied rechargeable
batteries (Part No. HHR-65AAABU).
LWhen installing the batteries:
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T) or the unit contacts.
– Ensure correct polarities (S, T).
LWhen replacing the batteries:
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
– We recommend using the
Panasonic rechargeable batteries
noted in the operating instructions
for replacement battery information.
1 Release the battery cover latch and
lift the cover open.
2 Insert the batteries negative (T) end
first.
3 Close the handset cover.
4 Fasten the battery cover latch.
Battery charge
Use the charger dedicated for the
KX-TGA936 (Part No. PNLC1003 -
can be seen at the bottom of the
charger).
Belt clip
You can hang the handset on your belt
or pocket using the supplied belt clip.
Use the belt clip dedicated for the
KX-TGA936 (Part No. PNKE1011 -
can be seen at the back of the belt
clip).
Rechargeable Ni-MH ONLY
TG9348(e).fm Page 4 Monday, January 28, 2008 4:22 PM
/