Panasonic DMPUB700EG Operating instructions

Brand: Panasonic

Model: DMPUB700EG

Category: Blu-Ray players

Type: Operating instructions

Operating Instructions

Blu-ray Disc

Player

Model No. DMP-UB700

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure

that our customers are enjoying the latest technology.

Panasonic recommends updating your firmware as soon as you

are notified.

For details, refer to “Firmware updates” (> 18) or

http://panasonic.jp/support/global/cs/ (This site is in English only.)

until

2016/9/20

TQBS0007

DMP-UB700_EG-TQBS0007.book 1 ページ２０１６年８月２４日　水曜日　午後３時２６分

- 2 -

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥ Do not place objects filled with liquids, such as vases, on this

unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the

socket outlet immediately.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles,

on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile telephone.

≥ This unit is intended for use in moderate climates.

≥ Some portions of this unit may become hot during use. When

moving or cleaning this unit, disconnect the AC mains lead and

wait for 3 minutes or longer.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or

in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers,

tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that

may become hot. The heat can damage the unit.

≥ Do not expose this unit to direct sunlight, high temperatures,

high humidity, and excessive vibration.

Batteries

Mishandling of batteries can cause electrolyte leakage and may

cause a fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace

only with the type recommended by the manufacturer.

≥ When disposing of the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same

time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for

a long period of time. Store in a cool, dark place.

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of

unauthorized copies of some commercially-produced film and

videos and their soundtracks. When a prohibited use of an

unauthorized copy is detected, a message will be displayed and

playback or copying will be interrupted.

More information about Cinavia technology is provided at the

Cinavia Online Consumer Information Center at

http://www.cinavia.com. To request additional information about

Cinavia by mail, send a postcard with your mailing address to:

Cinavia Consumer Information Center, P.O. Box 86851, San

Diego, CA, 92138, USA.

Precautions

WARNING

Small object

Keep the Memory Card out of reach of children to prevent

swallowing.

CAUTION

Restriction on use of

unauthorized copied content

DMP-UB700_EG-TQBS0007.book 2 ページ２０１６年８月２４日　水曜日　午後３時２６分

- 3 -

≥ The operation history may be recorded in the memory of this

unit.

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products, packaging, and/or

accompanying documents mean that used electrical

and electronic products and batteries must not be

mixed with general household waste.

For proper treatment, recovery and recycling of old

products and used batteries, please take them to

applicable collection points in accordance with your

national legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential negative

effects on human health and the environment.

For more information about collection and recycling,

please contact your local municipality.

Penalties may be applicable for incorrect disposal of

this waste, in accordance with national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination with a

chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical

involved.

Wireless LAN connection

The following limits are in place regarding the usage of this unit.

You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage

which may arise due to a failure to obey these limits, or to any

condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be

intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and

follow the following points:

– Do not expose this unit to high temperatures or direct

sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our

R&TTE products from our DoC server:

http://www.doc.panasonic.de

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

This product is in compliance with the radio standards of the

following countries.

Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark,

Finland, France, Germany, Greece, Hungary, Ireland, Italy,

Iceland, Liechtenstein, Luxembourg, Malta, Netherlands,

Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, United Kingdom, Switzerland

The WLAN feature of this product shall exclusively be used

inside buildings.

This product on purpose to connect to access point of 2.4 GHz or

5GHz WLAN.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you

discard this unit either by disposal or transfer, then follow the

procedure to return all the settings to the factory presets to delete

the user settings. (> 35, “To return all settings to the factory

preset.”)

DMP-UB700_EG-TQBS0007.book 3 ページ２０１６年８月２４日　水曜日　午後３時２６分

- 4 -

Table of contents

Precautions . . . . . . . . . . . . . . . . . 2

Getting started

Accessories . . . . . . . . . . . . . . . . . 5

Unit and media care . . . . . . . . . . . 5

Playable media. . . . . . . . . . . . . . . 6

Control reference guide . . . . . . . . 8

Connecting to a TV . . . . . . . . . . 10

Connecting to

an amplifier/receiver. . . . . . . . . 11

Connecting to the network . . . . . 16

Settings . . . . . . . . . . . . . . . . . . . 17

Playback

HOME menu . . . . . . . . . . . . . . . 19

Playback. . . . . . . . . . . . . . . . . . . 19

Enjoying

Network Service . . . . . . 22

Home Network feature . . . . . . . . 23

VIERA Link. . . . . . . . . . . . . . . . . 25

Option menu. . . . . . . . . . . . . . . . 26

Reference

Setup menu. . . . . . . . . . . . . . . . . 29

Troubleshooting guide . . . . . . . . 35

Specifications . . . . . . . . . . . . . . . 40

Licenses . . . . . . . . . . . . . . . . . . . 42

To enjoy Ultra HD Blu-ray Disc featured with

High Dynamic Range (HDR)

If you see a message about High Dynamic

Range (HDR) compatible issue while an Ultra

HD Blu-ray Disc is played back, please check

your TV settings as follows.

An example of the message:

“This player is not connected to a High Dynamic

Range (HDR) compatible TV.”

1) If you are using a Panasonic TV compatible

with 4K and High Dynamic Range (HDR)

released in 2015 or 2016, (DX900/DX800/

DX780/DX750/DX730/DX700 series etc.),

please check your TV settings as follows.

– Switch the TV to the HDMI input.

– Press “MENU” button of your TV remote

control

– Select “HDMI HDR Setting” in “Setup”

– Select “On” in “HDMI HDR Setting”

2) If you use a TV not from Panasonic,

compatible with 4K and High Dynamic Range

(HDR), please refer to the operating

instructions of the TV.

3) When you play a High Dynamic Range (HDR)

disc on a TV without High Dynamic Range

(HDR) capability, the disc can be played back

(in non-HDR quality) even if the message

appears.

DMP-UB700_EG-TQBS0007.book 4 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 5 -

Getting startedGetting started

Accessories

Check the supplied accessories before using this

unit.



≥ Product numbers are provided in these operating

instructions correct as of August 2016.

These may be subject to change.

≥ Do not use AC mains lead with other equipment.

∫ Using the remote control

Insert the batteries to the terminal so that it (i

and j) matches those in the remote control.

Unit and media care

∫ Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to

clean this unit.

≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens

Use the lens cleaner (not supplied) to clean the

unit’s lens.

∫ Clean discs

Wipe with a damp cloth and then wipe dry with a

dry cloth.

∫ Disc and card handling precautions

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine,

thinner, static electricity prevention liquids or

any other solvent.

≥ Clean any dust, water, or foreign matter from

the terminals on the rear side of the card.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed

stickers or labels (rented discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart

shapes.

1 Remote control

(N2QAYB001090)

2 Batteries for remote control

1 AC mains lead

1CD-ROM

Point it at the remote control signal sensor on this

unit. (> 9)

R6/LR6, AA





(Alkaline or manganese batteries)

DO NOT

DMP-UB700_EG-TQBS0007.book 5 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 6 -

Playable media

Device Media markings Device types Contents format

Ultra HD Blu-ray*

Video

BD-Video Video

BD-RE

Video,

JPEG, MPO

BD-R

Video, MKV,

JPEG, MPO

DVD-Video Video

DVD-R

Video, AVCHD, MKV,

JPEG, MPO,

AAC, ALAC,

DSD (DFF, DSF),

FLAC, MP3, WAV,

WMA

DVD-R DL

DVD-RW

Video, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA]

—

CD-R

CD-RW

MKV,

JPEG, MPO,

AAC, ALAC, FLAC,

MP3, Music [CD-DA],

WAV, WMA

SD Memory Card (from 8 MB to 2 GB)

SDHC Memory Card (from 4 GB to 32 GB)

SDXC Memory Card (48 GB, 64 GB)

(Compatible with both mini and micro

types)

AVCHD, AVCHD 3D,

MP4,

JPEG, MPO

—

USB devices

(up to 2 TB)

MKV, MP4, MPEG2,

JPEG, MPO,

AAC, ALAC,

DSD (DFF, DSF),

FLAC, MP3, WAV, WMA

≥ See pages 7 and 40 for more information on the types of content that can be played.

See “Enjoying Ultra HD Blu-ray” (> 21)

Unless otherwise indicated, BD-Video content includes Ultra HD Blu-ray content in these operating instructions.

DVD

USB

DMP-UB700_EG-TQBS0007.book 6 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 7 -

∫ Types of discs that cannot be played

by this unit

Any other disc that is not specifically

supported or previously described.

∫ Region management information

∫ Finalize

Any DVD-R/RW/R DL, +R/+RW/+R DL and

CD-R/RW that are recorded by a recorder need to

be finalized by the recorder to play on this unit.

Please refer to the recorder’s instructions.

∫ BD-Video

≥ This unit supports high bit rate audio (Dolby

Digital Plus, Dolby

TrueHD, DTS-HD High

Resolution Audio

and DTS-HD Master

Audio

) adopted in BD-Video.

∫ 3D

≥ 3D videos and 3D still pictures can be played

back when this unit is connected to a 3D

compatible TV using a High Speed HDMI

Cable.

∫ Music CD

Operation and sound quality of CDs that do not

comply with CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed to work.

∫ SD card

≥ miniSD Cards, microSD Cards,

microSDHC Cards and

microSDXC Cards can be used,

but must be used with an adaptor

card.

≥ To protect the card’s contents,

move the record prevention tab (on

the SD card) to “LOCK”.

≥ This unit is compatible with SD Memory Cards

that meet SD Card Specifications FAT12 and

FAT16 formats, as well as SDHC Memory

Cards in FAT32 format and SDXC Memory

Cards in exFAT.

≥ If the SD card is used with incompatible

computers or devices, recorded contents may

be erased due to the card being formatted etc.

≥ Usable memory may be slightly less than the

card capacity.

≥ For playback of 4K videos stored on an SD

card, use an SD card conforming to Class 10 of

the SD Speed Class Rating.

∫ USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device

charging.

≥ FAT12, FAT16, FAT32, and NTFS file systems

are supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit supports an HDD formatted in FAT32

and NTFS. If the HDD is not recognized, the

power to the HDD may not be supplied. Supply

power from an external source.

∫ BD-RE, BD-R

This unit may not correctly play back the audio

portion of a video recorded to a disc in multiple

languages with a Blu-ray disc recorder.



≥ It may not be possible to play the above media in some

cases due to the type of media, the condition of the

recording, the recording method

and how the files were

created.

≥ The producers of the disc can control how discs are

played, so you may not always be able to control play as

described in these operating instructions. Read the disc’s

instructions carefully.

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ HD DVD

The unit can play back BD-Video/DVD-Video

discs of the following regions codes, including

“ALL”:

Example: BD-Video DVD-Video

DMP-UB700_EG-TQBS0007.book 7 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 8 -

Control reference guide

∫ Remote control

When other Panasonic devices respond to the

remote control of the unit, change the remote

control code. (> 34)

1 Turn the unit on and off

2 TV operation buttons

You can operate the Panasonic TV using this

unit’s remote control. Some buttons may not

work depending on the TV.

3 Select title numbers, etc./Enter numbers or

characters

4 Cancel

Clear the currently selected character.

(when entering a password for “Ratings” in

the Setup menu, for example)

5 Change soundtrack (> 20)

6 Basic playback control buttons (> 19)

7 Show Pop-up menu (> 20)

8 Show Top menu (> 20)

9 Show Option menu (> 26)

10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the

screen

11 Transmit the remote control signal

12 Open or close the disc tray (> 9)

13 Show the status messages (> 20)

14 Show the screen of the Mirroring function

(> 23)

15 Show the Home screen of the Network

Service (> 22)

16 Exit the Menu screen

17 Show NETFLIX screen (> 22)

18 Show HOME menu (> 19)

19 [3, 4, 2, 1] : Move the highlight for

selection

[OK] : Confirm the selection

(2;)(;1) : Frame-by-frame (> 20)

20 Return to previous screen

DMP-UB700_EG-TQBS0007.book 8 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 9 -

∫ Front

1 Disc tray

2 Display

3SD card slot

When removing the SD card, press the centre

of the card and pull it straight out.

4 USB port ( DC 5 V 500 mA)

5 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20e up and down, 30e left and

right

6 Open or close the disc tray*

7 Standby/on switch* (Í/I) (> 17)

Touch to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

* These buttons work just by touching the marks.

Do not place any objects on or around the buttons.

∫ Rear

1 AC IN ( ) terminal (> 10)

2 LAN port (> 16)

3 HDMI AUDIO OUT terminal (> 11)

4 HDMI VIDEO OUT terminal (> 10)

5 DIGITAL AUDIO OUT terminal

(OPTICAL terminal) (> 12)

6 Cooling fan

7 HDMI OUT terminal

2 3 4 5

Pull to flip down

the front panel.

CAUTION

Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and

this may cause malfunction.



≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.

≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected

equipment. For details, refer to the instructions for the connected equipment.

21 53 4

Class II equipment (The construction of the product is

double-insulated.)

DMP-UB700_EG-TQBS0007.book 9 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 10 -

Connecting to a TV

4K images can be played back when this unit is connected to 4K compatible TV.

≥ Before making any connections, please disconnect all the units from AC power.

(Connect the AC mains lead after making all connections.)

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

≥ This unit consumes a small amount of AC power (> 40) even when turned off in standby mode. For

the purpose of energy conservation, the unit should be disconnected if you will not be using it for

extended period of time.

∫ Enjoying 4K output

≥ To enjoy images in 4K (50p/60p), you need an HDMI cable that supports 18 Gbps.

When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.

It is recommended that you use Panasonic’s HDMI cable.

≥ If you connect this unit to a 4K-compatible TV and perform “Easy Settings”, 4K (50p/60p) will

be automatically selected. (> 17, 34)

≥ To view Ultra HD Blu-ray content in 4K/HDR format, connect to the HDMI terminal of a device that

supports HDCP2.2, 4K (50p/60p) 4:4:4, and HDR signals that meet Ultra HD Blu-ray standards.

Enjoying video and audio with a 4K-compatible TV

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

HDMI IN

HDMI cable

(18 Gbps)

AC mains lead

(supplied)

To a household

mains socket

DMP-UB700_EG-TQBS0007.book 10 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 11 -

Connecting to an amplifier/receiver

Enjoying video with a 4K-compatible TV and audio with an amplifier

You can enjoy richer sound by using the HDMI AUDIO OUT terminal.

(Audio is output in high resolution.)

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)



≥ The HDMI AUDIO OUT terminal is not compatible with 4K output and the VIERA Link (> 25).

Enjoying video with a 4K-compatible TV and audio with a 4K-compatible amplifier

HDMI INHDMI IN

HDMI cable

(18 Gbps)

HDMI cable

Amplifier/receiver

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)



≥ About ARC:

When using the TV or amplifier/receiver that does not have the indication of “(ARC)” (non-ARC-compatible) on the HDMI

terminal, the amplifier/receiver and TV must also be connected using an optical digital cable or coaxial cable in order to

enjoy the TV’s sound through the amplifier/receiver.

HDMI IN

(ARC)

HDMI OUT

(ARC)

HDMI IN

Amplifier/receiver

(4K-compatible)

HDMI cable

(18 Gbps)

HDMI cable

(18 Gbps)

DMP-UB700_EG-TQBS0007.book 11 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 12 -

3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV.

≥ This connection only supports up to 5.1ch.

≥ To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier

must be ARC-compatible. (> 11, “About ARC”)

Enjoying audio with an amplifier connected to the OPTICAL terminal

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

Connecting an amplifier to a 4K-compatible TV

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

OPTICAL IN

Optical digital cable

Amplifier/receiver

HDMI OUT

(ARC)

HDMI IN

(ARC)

HDMI IN

Amplifier/receiver

HDMI cableHDMI cable

(18 Gbps)

DMP-UB700_EG-TQBS0007.book 12 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 13 -

Enjoying video with a 4K-compatible TV in combination with an amplifier connected to the

HDMI AUDIO OUT terminal and another amplifier connected to the OPTICAL terminal

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)



≥ It is not possible to simultaneously output audio from both the amplifier connected to the HDMI AUDIO OUT terminal and the

other amplifier connected to the OPTICAL terminal.

OPTICAL IN

HDMI INHDMI IN

HDMI cable HDMI cable

(18 Gbps)

Amplifier/receiver

Optical digital cable

DMP-UB700_EG-TQBS0007.book 13 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 14 -

Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector and an

amplifier that is connected to the OPTICAL terminal

HDMI INHDMI IN

OPTICAL IN

HDMI cable HDMI cable

(18 Gbps)

Projector

(2K-compatible)

Amplifier/receiver

Optical digital cable

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV:

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)

Set “Audio Output” to “On” in “Advanced Settings”. (> 30)

≥ To enjoy video with a projector

Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)

(It is not possible to output 3D, 4K or HDR content from the HDMI OUT terminal when “Video+Audio”

is selected.)

DMP-UB700_EG-TQBS0007.book 14 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 15 -

Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector and an

amplifier that is connected to the HDMI AUDIO OUT terminal and another amplifier that is

connected to the OPTICAL terminal

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)

≥ To enjoy video with a projector

Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)

(It is not possible to output 3D, 4K or HDR content from the HDMI OUT terminal when “Video+Audio”

is selected.)



≥ It is not possible to simultaneously output audio from both the amplifier connected to the HDMI AUDIO OUT terminal and the

other amplifier connected to the OPTICAL terminal.

OPTICAL IN

HDMI INHDMI IN

HDMI IN

HDMI OUT

HDMI cable HDMI cable

(18 Gbps)

Amplifier/receiver

HDMI cable

Projector

(2K-compatible)

Amplifier/receiver

Optical digital cable

DMP-UB700_EG-TQBS0007.book 15 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 16 -

Connecting to the network

The following services can be used when this unit is connected to broadband.

For details about connection method, refer to the instructions supplied with the connected equipment.

≥ For up-to-date compatibility information on your wireless router, refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ See page 3 for the precautions of wireless LAN connection.

≥ Use category 5e or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.

≥ Firmware can be updated (> 18)

≥ You can enjoy Ultra HD Blu-ray/BD-Live/Network Service (> 21, 22)

≥ You can access other devices (Home Network) (> 23)

≥ This unit supports Direct Access and can make a wireless connection to wireless devices without

router. You can use this function when enjoying Home Network feature, etc. Internet access is not

available while connected via Direct Access. (> 24)

Wireless LAN connection

This unit has built-in wireless LAN and can be connected to a wireless router.

≥ The unit is not compatible with public wireless LAN services.

Wireless router, etc.

Internet

LAN cable connection

Broadband router, etc.

Internet

LAN Cable

DMP-UB700_EG-TQBS0007.book 16 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 17 -

After connecting your new player for the first time

and pressing [Í], the basic settings screen will

appear.

Preparation

Turn on the TV and select the appropriate

video input.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions to

continue with the settings.

(e.g., “Quick Start”)

≥ Certain recent models of Panasonic TVs

(VIERA) may automatically apply their

language setting to this unit.

Follow the on-screen instructions to set the

format.



≥ To reconnect this unit to a 4K (50p or 60p)-compatible TV

after connecting this unit to a 2K-compatible TV and

completing “Easy Settings”, set “4K(50p/60p) Output” to

“4K(50p/60p) 4:4:4” or “4K(50p/60p) 4:2:0”. (> 29)

Settings

The following settings can be performed anytime

in the Setup menu. (> 32, 34)

Easy Settings

∫ When connected to a 4K (50p or

60p)-compatible TV

When connected to a 4K (50p or 60p)-compatible

TV, you can set the video output format.

Easy Network Setting

After completing “Easy Settings”, you can perform

“Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK].

4K(50p/60p) Output

Start

Start connection check with your 4K TV.

Once connection check is started and if the video is not displayed

correctly, please wait for the next display. The connection check

could take up to 30 seconds to display the new message screen.

RETURN

∫ “Wired” connection

Follow the on-screen instructions to apply your

connection settings.

∫ “Wireless” connection

Preparation

Before beginning wireless connection setup

≥ Obtain your network name (SSID*

≥ If your wireless connection is encrypted,

please be sure that you know your

encryption key.

Then follow the on-screen instructions and

apply the settings.

PUSH button method*

If the wireless router supports

the PUSH button method*

you can connect to and

configure the security settings

of your wireless LAN device

with ease by pressing the Link button on the

router.

1 Press the green button on the remote

control.

2 Press Link button or corresponding button

of the wireless router until the lamp starts

flashing.

≥ For details, refer to the operating

instruction of the wireless router.

3 Select “Start”.

Easy Network Setting

Wired

Wireless

Select a connection mode.

RETURN

e.g.

Link button

DMP-UB700_EG-TQBS0007.book 17 ページ２０１６年８月２４日　水曜日　午後３時２６分

Getting started

- 18 -



≥ Refer to the operating instructions of the hub or router.

≥ Do not use this unit to connect to any wireless network for

which you do not have usage rights.

Using these networks may be regarded as illegal

access.

≥ If you have trouble getting online on your PC after

performing network settings on this unit, perform the

network settings on your PC.

≥ Please be aware that connecting to a network without

encryption may result in the leaking of data such as

personal or secret information.

An SSID (Service Set IDentification) is a name used by

wireless LAN to identify a particular network. Transmission

is possible if the SSID matches for both devices.

The PUSH button method is a connection method which

allows you to set encryption for a wireless LAN connection

with ease.

You can connect to a wireless LAN network by pressing a

certain button on the wireless access point [Link button,

WPS (Wi-Fi Protected Setup

) button, etc.].

This unit is capable of checking the firmware

automatically when connected to the Internet via

a broadband connection.*

When a new firmware version is available, the

following message is displayed.

You cannot operate the unit until the update is

complete. Don’t remove the AC mains lead during

the update. Removing the AC mains lead while

the update is in progress may damage the unit.

After the firmware is installed, “FINISH” will be

displayed on the unit’s display. Unit will restart

and the following screen will be displayed.



≥ You can also download the latest firmware from the

following website and store it to a USB device to

update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ To show the firmware version on this unit. (> 34,

“Firmware Version Information”)

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.

You must agree to the terms of use for the Internet function

and the privacy policy. (> 33, “Notice”)

“X.XX” represents the firmware version number.

Search for wireless network:

≥ The available wireless networks will be

displayed on the screen.

Select your network name.

– If your network name is not displayed,

search again by pressing the red button on

the remote control.

– Stealth SSID will not be displayed when

you press the red button on the remote

control.

Enter manually by using “Manual setting”.

(> 32)

≥ If your wireless network is encrypted,

Encryption Key input screen will be

displayed.

Input the encryption key of your network.

Firmware updates

Firmware Update

Current Installed Version: X.XX

New Version: X.XX

Do you want to start firmware update?

For the update information, please visit the

following website:

http://panasonic.net/support/

NoYes

RETURN

The firmware has been updated.

Current Version

: x.xx

DMP-UB700_EG-TQBS0007.book 18 ページ２０１６年８月２４日　水曜日　午後３時２６分

- 19 -

Playback

HOME menu

Major functions of this unit can be operated from

the HOME menu.

Preparation

Turn on the TV and select the appropriate video

input.

1 Press [Í] to turn on the unit.

2 Press [OK] or [2, 1] to select the item.

≥ Press [OK] or [3, 4] to select the item if

necessary.

To show the HOME menu

Press [HOME].



≥ Items to be displayed may vary with the media.

Playback

1 Insert the media.

Playback starts depending on the media.

2 Select the item to play and press [OK].

Repeat this step if necessary.



≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [∫STOP] when you have finished

playback to protect the unit’s motor, your TV screen and so

on.

≥ When the following conditions are met, still pictures are

played back in 4K regardless of the image quality.

– The unit is connected to a 4K compatible TV

– “Video Format” is set to “Automatic” or “4K” (> 29)

≥ This unit can not output 4K images when playing back in

3D.

≥ It is not possible to play back AVCHD and MPEG2 videos

which have been dragged and dropped or copied and

pasted to the media.

≥ To enjoy BD-Video that supports Dolby Atmos

or DTS:X

(> 31)

Some operations may not work depending on the

media and contents.

Press [∫STOP].

The stopping point is memorized.

Resume play function

Press [1PLAY] to restart from this point.

≥ The point is cleared if the media is removed.

≥ On BD-Video discs including BD-J, the

resume play function does not work.

Press [;PAUSE].

≥ Press [;PAUSE] again or [1PLAY] to restart

play.

Videos/Music/Photos

Disc

Play back the contents.

(> right)

≥ When multiple contents

are recorded, select the

types of contents or the

title.

≥ See “Playable media”

(> 6)

SD Card

USB

Home Network

Network Contents

Playback

(> 24)

Mirroring

(> 23)

Media Renderer

(> 24)

Network Service

Displays the Home screen of Network Service.

(> 22)

Setup

Player Settings

(> 29)

Wallpaper

Changes the background

of HOME menu.

SD Card

Management

(> 21)

Operations during playback

Stop

Pause

DMP-UB700_EG-TQBS0007.book 19 ページ２０１６年８月２４日　水曜日　午後３時２６分

- 20 -

Playback

While playing, press [SEARCH6] or

[SEARCH5].

≥ Ultra HD Blu-ray, MKV, MP4 and MPEG2:

Audio is not heard.

Slow motion

While paused, press [SEARCH6] or

[SEARCH5].

≥ BD-Video and AVCHD: [SEARCH5] only.

≥ MKV, MP4 and MPEG2: Not effective.

The speed increases up to 5 steps.

≥ Music, MP3, etc.: The speed is fixed to a single

step.

≥ Press [1PLAY] to revert to normal playback

speed.

While playing or paused, press [:] or

[9].

Skip to the title, chapter or track.

While paused, press [2] (2;) or [1] (;1).

≥ Each press shows the next frame.

≥ Press and hold to change in succession forward

or backward.

≥ Press [1PLAY] to revert to normal playback

speed.

≥ BD-Video and AVCHD: Forward only.

≥ MKV, MP4 and MPEG2: Not effective.

Press [AUDIO].

You can change the audio channel number or

soundtrack language, etc.

Press [TOP MENU] or [POP-UP MENU].

Select the item and press [OK].

While playing, press [STATUS].

The status messages give you information about

what is currently being played. Each time you

press [STATUS], the display information may

change or disappear from the screen.

≥ Depending on media and contents, the display

may change or not appear.

e.g., BD-Video

A T: Title, C: Chapter, PL: Playlist

B Elapsed time in the title

C Current position

D To ta l ti me

e.g., JPEG

≥ During music playback, the elapsed time, file

name and other relevant information are

displayed on the unit’s display.

e.g., MP3

Search/Slow motion

Skip

Frame-by-frame

Changing soundtrack

Show top menu/pop-up menu

Show the status messages

Play

BD-Video

T1 C1

Date 11.12.2010

Size 500 x 375

Manufacturer

Equipment

No.

DMP-UB700_EG-TQBS0007.book 20 ページ２０１６年８月２４日　水曜日　午後３時２６分

Page is loading ...

Panasonic DMPUB700EG Operating instructions

Brand: Panasonic

Model: DMPUB700EG

Category: Blu-Ray players

Type: Operating instructions

Download PDF

report

Panasonic DMPUB700EG Operating instructions

Panasonic DMPUB700EG Operating instructions

Related papers

Other documents