Whirlpool ZIS6 1 W Setup and user guide
- Category
- Fridges
- Type
- Setup and user guide
EN
Quick guide
THANK YOU FOR BUYING AN INDESIT PRODUCT
In order to receive a more complete assistance, please
register your product on www . indesit . com/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat
knob to switch on the appliance.
After turning the appliance on, you must wait for 4‑6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti‑odour lter in the fan as
demonstrated in the lter packaging (if available).
CONTROL PANEL
1. Temperature button
2. Fast Cooling button
3. Indicator LEDs
3.
1.
2.
TEMPERATURE BUTTON
Press the Temperature button on the control panel to adjust the
temperature from the warmest through the lower to the coldest level.
Pressing the Temperature button, the temperature setting will change
cyclically. At rst plug‑in of appliance temperature setpoint is present
at medium position (factory setting).
Following table shows temperature setpoints::
Led ON Led OFFLed ON Led OFF
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
Led ON Led OFF
High temp.
Med‑high temp.
Medium temp.
Med‑low temp.
Low temp.
Note: Displayed set points correspond to the average temperature
throughout the whole refrigerator.
FAST COOLING BUTTON
The use of the Fast Cooling function is recommended:
• to increase the cooling speed of the refrigerator compartment
when placing a very high quantity of food within it,
To activate the Fast Cooling function, press and hold for 3seconds the
Temperature button on the control panel till all the 3 LEDs will turn on.
Led ON Led OFFLed ON Led OFF
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
The function is automatically deactivated after 6 hours and return to
previous selected set point. The function can be manually deactivated
by pressing and holding for 3 seconds the Temperature button on the
control panel.
INDICATOR LEDS
To display the current temperature setpoint or the Fast Cooling
function.
REFRIGERATOR LIGHT
The light system inside the refrigerator compartment uses LEDs light,
allowing a better lightning as well as a very low energy consumption.
If the LED light system does not work, please contact the Service to
replace it.
Important: The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for more then 8
minutes the light will be automatically switched o.
FAN
The fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food. By default,
the fan is switched on. It is advisable to keep the fan switched on, so
that the “6
th
Sense” function can work properly and also when the
ambient air temperature is above 27 ‑ 28°C or if you notice drops of
water on the glass shelves or in sever humidity
conditions. To turn o the fan press the button of fan.
Please note that when the fan is switched on it will not
continuously work. The fan will start/stop working
depending on the temperature and/or humidity level
inside the fridge. It is therefore absolutely normal if the
fan does not move even if the fan is switched on.
on - o
19515454600
HOW TO STORE FRESH FOOD AND BEVERAGE
X X
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST ZONE
meat
FRUIT & VEGETABLE DRAWER
Legend
X X
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST ZONE
meat
FRUIT & VEGETABLE DRAWER
FREEZER ZONE
X X
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST ZONE
meat
FRUIT & VEGETABLE DRAWER
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
X X
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST ZONE
meat
FRUIT & VEGETABLE DRAWER
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
X X
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST ZONE
meat
FRUIT & VEGETABLE DRAWER
COOLEST ZONE
Suggested for the storage of cold cuts, desserts, sh and
meat
X X
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST ZONE
meat
FRUIT & VEGETABLE DRAWER
FRUIT & VEGETABLE DRAWER
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The appliance doesn’t work. There may be an appliance power
supply problem.
Make sure:
• there is not a power failure;
• the plug is properly inserted in the power socket and the double‑
pole switch (if present) is in the correct position (on);
• the household electrical system protection devices function;
• the power cable is not broken.
The inside light does not
work.
It may be necessary to replace the light
bulb.
Disconnect the appliance from the power supply and contact the
Technical Assistance Service if you need a replacement.
The internal temperature
of the compartments is not
cold enough.
The reasons could vary (see “Solution”)
column.
Check that:
• the doors are closed properly;
• the appliance is not installed near a heat source;
• the temperature is appropriately set;
• the circulation of air through the ventilation grilles on the base of
the appliance is not obstructed.
There is water on the
bottom of the refrigerator
compartment.
The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and
Maintenance").
The front edge of the
appliance that the door
gaskets seal against is hot.
This is not a problem. It prevents
condensation from forming.
A solution is not needed.
The temperature of the
refrigerator compartment is
too cold.
The set temperature is too cold. • Try to set a less cold temperature.
• Turn o the fan (if present) described in the paragraph “FAN”.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website docs . indesit . eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After‑sales Service, please state the codes provided on your product's identication
plate.
-
1
-
2
Whirlpool ZIS6 1 W Setup and user guide
- Category
- Fridges
- Type
- Setup and user guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Privileg PRBE 365I A+++ Program Chart
-
Whirlpool SW8 1Q XR UK User guide
-
Whirlpool SW8 1Q XW Setup and user guide
-
Whirlpool BSNF 9121 W Setup and user guide
-
Whirlpool BSNF 9152 OX Setup and user guide
-
Whirlpool BSNF 9151 OX Setup and user guide
-
Whirlpool BSNF 9152 W Setup and user guide
-
Whirlpool BSNF 8101 OX Owner's manual
-
-
Whirlpool BSNF 8152 S Setup and user guide