Whirlpool FT M11 72Y EU Setup and user guide

Brand: Whirlpool

Model: FT M11 72Y EU

Category: Tumble dryers

Type: Setup and user guide

Whirlpool FT M11 72Y EU is feature-packed tumble dryer with a user-friendly control panel. It comes with a wide range of programmes, including specialised ones for delicate fabrics like wool and silk. The Rapid 30' programme is ideal for quickly drying small loads, while the Start Delay option allows you to set the dryer to start at a later time, which is useful if you want to take advantage of cheaper energy tariffs. The machine is also equipped with a number of safety features, such as a child lock and an automatic shut-off function.

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website - docs.whirlpool.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

PROGRAMS

Eco Cotton kg Max*

Standard cotton programme, suitable to dry normally wet cotton

laundry. Most ecient programme in terms of energy consumption

for drying cotton laundry. The values on the Energy Label are based on

this programme.

Mixte kg 4

This programme is ideal for drying cotton and synthetic fabrics

together.

Bed Linen Kg Max*

This programme is intended for drying cotton sheets.

Shirts kg 3

This is a programme for Shirts made from cotton or cotton

blend/synthetics.

Sport kg 4

For drying sports garments made of synthetics or cotton.

Duvet

Programme intended to dry bulky garments, as single duvet.

Jeans kg 3

For drying cotton jeans-wear and garments made of robust

cotton, like denim, such as trousers and jackets.

Easy Ironing

This cycle allows to extend the bres of garments thus making

ironing and folding easier. Do not use in case of garments that are

still wet. Suitable for small loads of cotton textiles or cotton blends.

Refresh

A short programme suitable for refreshing bres and garments by

means of fresh air. Do not use with garments that are still wet. It can be

used on with any load size but is more eective with small loads.

The cycle duration is about 20 minutes.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dryer is xed correctly,

either to the dryer’s water tank, or to your domestic sewage

system.

The dryer should be installed in environment in a room

temperature range of 20°to 23°C for optimum performance. But

will function if the room is between 14 and 30°C. Before you use

your dryer ensure that it has been in a upright position for at

least 6 hours.

DAILY USE

Doing this will keep your machine working at its BEST!

Remember to empty your water tank after each drying cycle.

Remember to clean your lters after each drying cycle. (Refer

to section Care & Maintanence).

1. Open the door and load garments. Always refer to instructions

on clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door lter.

2. Close the door.

3. Press the button On/O.

4. Select the programme according to the laundry type.

5. Select the options, if necessary.

6. To start the cycle, press the Start/Pause button.

7. At the end of the drying cycle, a buzzer will beep. An indicator on

the control panel signals the end of the cycle. Pull the load out

immediately to prevent the formation of creases on laundry

8. Turn the machine o by pressing the button On/O, open the

door and pull clothing out. If the machine is not switched o

manually, after about a quarter of an hour from the cycle end, the

appliance turns o automatically to save energy.

If this last stage is not carried out immediately, some machines

and/or some programmes/options are equipped with Crease Care

system. For some hours, after the end of drying, the drum rotates

at regular intervals to prevent the formation of creases. In case of

power failure, it is necessary to press the button Start/Pause to

restart the cycle.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having

closed it, press the button Start/Pause again to restart the dryer.

*MAX LOAD 7 Kg (Dry load)

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the  rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

CONTROL PANEL

1 ON/OFF button (Reset if long pressed)

2 Programme selection Knob

3 Start/Pause

Options Buttons*

4 Dryness Level

5 Start Delay

6 Timed Drying

7 Cycle End

8 Rapid (Key lock if long pressed)

9 Fresh Care+ (Mute if long pressed)

*Note: some models may have the wording in full instead of the icons

INDICATORS

Dryness Level: Iron Dry - Hanger Dry - Cupboard Dry - Extra Dry

Cycle phase: Drying - Cool Down - End of cycle.

Empty Water tank - Clean Door lter: primary, secondary Autoclean

Refer to Troubleshooting section: Failure: Call after sales service

DEMO

Demo Mode

4 56

3’’

4 56

3’’

OPTIONS BUTTONS

These buttons serves to personalise the selected programme

according to personal requirements. Not all options are available

for all programmes. Some options are incompatible with the

ones previously set. The buzzer and/or blinking indicators will

signal the incompatibility. If the option is available, the option

indicator will stay on. Some options may be kept in the memory

of the programme if selected in the previous drying.

Rapid 30' kg 0,5

Ideal for drying cotton garments spun at high speed in the

washing machine.

Coloured kg Max*

Programme for gentle drying suitable for coloured garments.

Silk kg 0,5

Gentle drying of silk garments.

Wool kg 1

Programme for drying wool clothing. It is advisable to turn

the garments inside out before drying. Leave to dry naturally the

heaviest edges that are still damp.

Delicates kg 2

For drying delicate laundry which needs gentle treatment.

Synthetics kg 4

For drying laundry made of synthetic bres.

OPTIONS

After selecting the programme, the various options can be

set, if necessary.

Dryness Level

Press the related button several times to obtain a dierent

level of residual moisture on garments. An indicator signals the

level being selected.

Iron Dry: a very delicate ironing. Suitable for making ironing

of garments easier immediately after the end of the cycle.

Hanger Dry: a level intended for delicate garments ready to

be hanged.

Cupboard Dry: the garments are ready to be folded and put

away.

Extra Dry: used for garments to be worn at the end of the

cycle.

Timed drying

This option allows to set the drying time. Press the

corresponding button to set the required time for drying. After

having reached the max. settable time, a further pressure of the

button resets the option. An indicator on the control panel signals

the time being selected.

Start Delay

This option allows you to set the delay of the cycle start. Press

the corresponding button several times to obtain the required

delay. After having reached the max. settable time, the option is

reset by pressing the button again. An indicator on the control

panel signals the time being selected. After having pressed the

button Start/Pause, the machine signals the remaining time

for the cycle start. In case of door opening, after closing, it is

necessary to press the button Start/Pause.

Rapid

Enables quicker drying.

Fresh Care+

If garments are left inside the drum after the end of the

cycle, they are subject to bacterial proliferation. This option allows

to prevent this proliferation by controlling the temperature and

the rotation of the drum. This treatment has a max. duration of 6

hours after the end of the programme set. This option remains in

memory if selected in the previous drying.

If this option is used together with the Start Delay, a crease

treatment (a periodic rotation of the drum) is added in the Start

Delay phase.

Key Lock

This option makes all machine controls inaccesible, except the

button On/O. When the machine is on: to activate the option,

keep the button pressed until the indicator goes on. To disable the

option, keep the button pressed until the indicator goes o. This

option remains in memory if selected in the previous drying.

Cycle End

This option activates a prolonged buzzer at the end of the

cycle. Enable it if you are not sure to hear the normal sound at the

end of the cycle. This option remains in memory if selected in the

previous drying.

Mute

This option turns o all sounds of control panel. Only

warnings remain active.

to activate the option, keep the button pressed until the indicator

goes on.

to disable the option, keep the button pressed until the indicator

goes o.

The wool drying cycle of this machine

has been approved by The Woolmark

Company for the drying of wool gar-

ments labelled as “hand wash” provided

that the garments are dried according

to the instructions issued by the ma-

nufacturer of this machine. Follow the

garment care label for other laundry

instructions. . The Woolmark symbol is a Certi cation mark in

many countries.

M1768

The duration of these programs will depend on the size of the

load, types of textiles, the spin speed used in your washer and

any extra options selected. In machines equipped with display,

the duration of the cycles is shown on the control panel. The

remaining time is constantly checked and adjusted during the

drying cycle to show the best possible estimate.

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website - docs.indesit.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.

THANK YOU FOR BUYING A INDESIT PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.indesit.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

CARE AND MANTENANCE

Unplug the dryer during the cleaning and maintenance

procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and and empty it into a

sink or other suitable drain, then place it back. Do not use the dryer

without having inserted the container back in place.

Cleaning the primary door lter after each cycle (see Fig. B).

After each cycle, pull the primary door lter out and clean it by

removing the lint from the lter surface under running water or

using a vacuum cleaner.

Cleaning the secondary door filter when the relevant

indicator turns on (see Fig. C).

Pull the secondary door lter out and clean it in all its parts by

washing it under running water or using a vacuum cleaner.

Do not use the dryer without having inserted all lters back

in place properly rst.

The lters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

of clogged lters, the air ow inside the dryer would be

seriously aected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

Autoclean

The maintenance of the bottom lter of this model is

automatic. The dryer carries out cleaning when the sensors signal

the need to do so. In this case, the machine goes on working even

when the drying cycle is completed. An indicator on the control

panel will signal the maintenance. Do not switch the machine o

during this phase.

PRODUCT DESCRIPTION

1. Water Tank

2. Air Intake

3. Door lter

B primary

C secondary

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Make sure that door and water tank are properly closed.

3. If the drain hose is connected to your sewage system, x the

drain hose on the rear of the dryer again (see Installation Guide).

Heat Pump System

The heat pump contains uorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.18 kg of the F gas R134a. GWP = 1430 (1 t CO2).

Power consumption

o-mode (Po) - Watts 0.50

left-on mode (Pl) - Watts 1.00

Programs Kg kWh Minutes

Eco Cotton *

7 1.63 180

Eco Cotton

3.5 1.01 122

Synthetics 4 0.83 109

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most ecient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting conguration)

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website - docs.whirlpool.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

TROUBLESHOOTING

Before contacting the Service Centre, refer to the table below. Often the malfunctions are minor and can be solved in few minutes

Malfunction

Possible cause

Solution

The tumble

dryer does not

turn on.

The plug is not inserted into the socket.

Insert the plug into the socket.

The plug is faulty.

Try to plug another appliance in the same socket. Do not use

connecting electrical devices to the socket, as adapters or extensions

A power failure occurred. Await the reactivation of the power supply.

The tumble

dryer does not

start

The door is open.

Close the door.

A time delay for the cycle start was set.

For machines equipped with this function: await the end of the delay

set or switch the machine o to reset it. Refer to the section Options.

The button Start/Pause was not pressed to start

the program.

Press the button Start/Pause.

The function Key Lock was enabled (in case of

machines equipped with this option).

Refer to the option section and, if the Key Lock is present, disable it.

Switching the machine o is not enough to disable this option.

The drying

times are very

long

An appropriate maintenance was not carried

out.

Refer to the section Care & Maintenance and perform the operations

described.

The programme, the time and/or the drying

level set are not suitable for the type and the

amount of load inserted into the dryer.

Refer to the section programmes and options to  nd the programme

and the options most suitable for the type of load.

The garments are too wet.

Carry out a washing cycle with higher spin speed to remove as much

water as possible.

The dryer may be overloaded.

Refer to the programme section to check the max. load for each

programme.

The programme

did not end.

A power failure occurred might have occurred.

In case of power failure, it is necessary to press the button Start/Pause

to restart the cycle.

Lights on or  ashing

Water tank The water tank is full. Emtpy the water tank. Refer to the section Care & Maintenance.

Door  lter

and/or bottom

 lter*

Failure of the air  ow necessary for machine

operation.

Clean the door  lter and the bottom one and check whether air

intake is free. Carrying out these operations improperly may cause

damages.

Bottom  lter* The bottom  lter requires cleaning. Clean the bottom  lter. Refer to section Care & Maintanence.

DEMO

The cycle lasts

few minutes.

The dryer is in DEMO mode. The DEMO

indicator is on.

Disable the DEMO mode. The following actions must be carried out

in sequence, without breaks. Switch the machine on and then switch

it o again. Press the Start/Pause button until the buzzer is heard.

Switch the machine on again. The “DEMO” indicator  ashes and then

turns o .

The presence

of wrench

symbol signals a

malfunction.

The machine sensors detected a failure.

Switch the dryer o and unplug it. Open the door immediately and

pull laundry out, to allow the heat to dissipate. Wait for about 15

minutes. Reconnect the dryer to the power supply, load the laundry

and restart the drying cycle. If the problem still occurs, contact

the After-Sales Service Centre and communicate the letters and

digits  ashing on the display.

For instance: F3 and E2

*Note: some models are self-cleaning and not equipped with bottom  lter. Please refer to the section Care & Maintenance.

Whirlpool FT M11 72Y EU Setup and user guide

Brand: Whirlpool

Model: FT M11 72Y EU

Category: Tumble dryers

Type: Setup and user guide

Download PDF

report

Whirlpool FT M11 72Y EU Setup and user guide

Whirlpool FT M11 72Y EU Setup and user guide

Related papers

Other documents