Installation -
12”
Duct
Co
v
e
r
DEC15.0101
AK07xxBS Cypress 12” Duct Cover
www.zephyronline.com
1
Zephyr Corporation
2277 Harbor Bay Pkwy, Alameda, CA 94502
Tel: 1.888.880.8368 Fax: 1.888.990.8368
e-mail: productsupport@zephyronline.com
Duct Cover Hood Compatibility
AK0736BS AK7836BS
AK0742BS AK7842BS
AK0748BS AK7848BS
1. Line up screw holes and attach the left and right side panels to the center
panel with screws provided.
2. Place assembled duct cover on top of hood. Make sure the screw holes of
the center panel are facing down and line up with the holes on top of hood.
3. Attach the duct cover to the top of hood by securing the rest of the screws
to it from within the inside of the hood.
AK0754BS AK7854BS
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI