Overview:
Installation:
1. After pasting the mounting
drawing paper on the ceiling, drill
holes based on the paper shown.
3. Screw the mount base according to
the mounting drawing paper. Or
remove the ceiling mount if needed.
4. Press slightly the bottom
and unlock the cover.
5. Take off the dome cover.
6. Remove the inner cover.
7. Latch the main body together
with the mount base. Then
loosen the tilt locking screws.
8. Adjust the zoom, focus and 3 Axis in
suitable position and connect the power
and video to check the performance.
9. Fasten the tilt locking screws.Finally
put the inner and dome cover together
with the dome body.
2. Twist off anticlockwise the
mount base from the dome body.
DLV1323P - 1/3" Color CCD Dome Camera