Woodstock 1 HP Oscillating Spindle Sander W1686 Owner's manual

Brand: Woodstock

Model: 1 HP Oscillating Spindle Sander W1686

Type: Owner's manual

This manual is also suitable for

W1686

Model W1686

***IMPORTANT UPDATE***

Applies to Models Mfg. Since 11/10

Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in Taiwan#13550JB

We recently made the following changes to the Model W1686 as part of the CSA approval process:

• Changed motor and power cords.

• Changed motor specifications.

These changes do not affect how the machine assembles or functions. In addition to the changes we made

to the machine, we have also changed how the machine should be connected to the power source and we

are providing updated information about machine safety, circuit requirements, and electrical grounding.

Aside from the information contained in this update, all other content in the owner's manual applies to this

machine. For your own safety, you MUST read and understand this update and the applicable owner's man-

ual. If you have any further questions about this manual update or the changes made to the machine,

contact our Technical Support at (570) 546-9663 or email techsupport@grizzly.com.

New Parts

Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz

MACHINE

SPECIFICATIONS

MOdEl W1686

OSCIllATING SPINdlE SANdER

Motor Size: ................................................1 HP 120V/240V Single-Phase

Motor Speed ......................................................................1725 RPM

Amps .....................................................................................12/6

Spindle Size ...

⁄4" x 5",

⁄8" x 6",

⁄2" x 6",

⁄8" x 6",

⁄4" x 9", 1" x 9", 1

⁄2" x 9", 2" x 9", 3" x 9", 4" x 9"

Oscillation Speed ............................................................................ 72 SPM

Stroke Length .......................................................................... 1

⁄2"

Base Size ...........................................................................16" x 16"

Dust Port ................................................................................... 4"

Table ...................................... Precision-Ground Cast Iron 27

⁄16" x 27

⁄16"

Stand .............................................. Cabinet-Style, Powder Coated Paint

Power Transfer ................................................................Direct Drive

Bearings .............................Sealed & Permanently Lubricated Ball Bearings

Switch ................................... Paddle ON/OFF Switch, w/ Safety Lock Key

Shipping Weight ....................................................................287 lbs.

Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz

MACHINE

SPECIFICATIONS

MOdEl W1686

OSCIllATING SPINdlE SANdER

Motor Size: ................................................1 HP 120V/240V Single-Phase

Motor Speed ......................................................................1725 RPM

Amps .....................................................................................12/6

Spindle Size ...

⁄4" x 5",

⁄8" x 6",

⁄2" x 6",

⁄8" x 6",

⁄4" x 9", 1" x 9", 1

⁄2" x 9", 2" x 9", 3" x 9", 4" x 9"

Oscillation Speed ............................................................................ 72 SPM

Stroke Length .......................................................................... 1

⁄2"

Base Size ...........................................................................16" x 16"

Dust Port ................................................................................... 4"

Table ...................................... Precision-Ground Cast Iron 27

⁄16" x 27

⁄16"

Stand .............................................. Cabinet-Style, Powder Coated Paint

Power Transfer ................................................................Direct Drive

Bearings .............................Sealed & Permanently Lubricated Ball Bearings

Switch ................................... Paddle ON/OFF Switch, w/ Safety Lock Key

Shipping Weight ....................................................................287 lbs.

New Specifications

12A @ 120V, 6A@240V

107

108

111

110

111

107

109

100

101

114

113

112

103

35V2

35-1

105

104

106

83V2

102

84V2

122

117

118

124

125

126

123

REF PART # DESCRIPTION

83V2 X1686083V2 MOTOR CORD 16AWG 3C 30" V2.11.10

84V2 X1686084V2 PWR CORD 16AWG 3C 12FT 5-15 V2.11.10

Parts 83V2 and 84V2 replace parts 83 and 84

in the Model W1686 Owner's Manual. When

ordering replacements for these components, be

sure to refer to these part numbers.

177335

-2-

Model W1686 (Mfg. Since 11/10)

Indicates a potentially hazardous situation which, if not avoided,

MAY result in minor or moderate injury.

Indicates an imminently hazardous situation which, if not avoided,

WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,

COULD result in death or serious injury.

This symbol is used to alert the user to useful information about

proper operation of the equipment, and/or a situation that may

cause damage to the machinery.

NOTICE

SAFETY

OWNER’S MANUAL. Read and understand this

owner’s manual BEFORE using machine.

Untrained users can be seriously hurt.

EYE PROTECTION. Always wear ANSI-approved

safety glasses or a face shield when operating

or observing machinery to reduce the risk of

eye injury or blindness from flying particles.

Everyday eyeglasses are not approved safety

glasses.

HAZARDOUS DUST. Dust created while using

machinery may cause cancer, birth defects,

or long-term respiratory damage. Be aware

of dust hazards associated with workpiece

materials, and always wear a NIOSH-approved

respirator to reduce your risk.

WEARING PROPER APPAREL. Do not wear

clothing, apparel, or jewelry that can become

entangled in moving parts. Always tie back

or cover long hair. Wear non-slip footwear to

avoid accidental slips which could cause a loss

of workpiece control.

HEARING PROTECTION. Always wear hearing

protection when operating or observing

loud machinery. Extended exposure to this

noise without hearing protection can cause

permanent hearing loss.

MENTAL ALERTNESS. Be mentally alert when

running machinery. Never operate under the

influence of drugs or alcohol, when tired, or

when distracted.

DISCONNECTING POWER SUPPLY. Always

disconnect machine from power supply before

servicing, adjusting, or changing cutting tools

(bits, blades, cutters, etc.). Make sure switch

is in OFF position before reconnecting to avoid

an unexpected or unintentional start.

DANGEROUS ENVIRONMENTS. Do not use

machinery in wet or rainy locations, cluttered

areas, around flammables, or in poorly-lit

areas. Keep work area clean, dry, and well-

lighted to minimize risk of injury.

Standard Machinery Safety Instructions

For Your Own Safety,

Read Manual Before Operating Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This

manual uses a series of symbols and signal words intended to convey the level of importance of the

safety messages. The progression of symbols is described below. Remember that safety messages by

themselves do not eliminate danger and are not a substitute for proper accident prevention mea-

sures—this responsibility is ultimately up to the operator!

Safety Instructions for Machinery

SAFETY

-3-

Model W1686 (Mfg. Since 11/10)

APPROVED OPERATION. Untrained operators

can be seriously hurt by machinery. Only

allow trained or properly supervised people

to use machine. When machine is not being

used, disconnect power, remove switch keys,

or lock-out machine to prevent unauthorized

use—especially around children. Make

workshop kid proof!

ONLY USE AS INTENDED. Only use machine for

its intended purpose. Never modify or alter

machine for a purpose not intended by the

manufacturer or serious injury may result!

USE RECOMMENDED ACCESSORIES. Consult

this owner’s manual or the manufacturer for

recommended accessories. Using improper

accessories will increase the risk of serious

injury.

CHILDREN & BYSTANDERS. Keep children and

bystanders a safe distance away from work

area. Stop using machine if children or

bystanders become a distraction.

REMOVE ADJUSTING TOOLS. Never leave

adjustment tools, chuck keys, wrenches, etc.

in or on machine—especially near moving

parts. Verify removal before starting!

SECURING WORKPIECE. When required, use

clamps or vises to secure workpiece. A secured

workpiece protects hands and frees both of

them to operate the machine.

FEED DIRECTION. Unless otherwise noted, feed

work against the rotation of blades or cutters.

Feeding in the same direction of rotation may

pull your hand into the cut.

GUARDS & COVERS. Guards and covers can

protect you from accidental contact with

moving parts or flying debris. Make sure

they are properly installed, undamaged, and

working correctly before using machine.

NEVER STAND ON MACHINE. Serious injury or

accidental contact with cutting tool may

occur if machine is tipped. Machine may be

damaged.

STABLE MACHINE. Unexpected movement during

operations greatly increases the risk of injury

and loss of control. Verify machines are

stable/secure and mobile bases (if used) are

locked before starting.

FORCING MACHINERY. Do not force machine. It

will do the job safer and better at the rate for

which it was designed.

AWKWARD POSITIONS. Keep proper footing and

balance at all times when operating machine.

Do not overreach! Avoid awkward hand

positions that make workpiece control difficult

or increase the risk of accidental injury.

UNATTENDED OPERATION. Never leave machine

running while unattended. Turn machine off

and ensure all moving parts completely stop

before walking away.

MAINTAIN WITH CARE. Follow all maintenance

instructions and lubrication schedules to

keep machine in good working condition. An

improperly maintained machine may increase

the risk of serious injury.

CHECK DAMAGED PARTS. Regularly inspect

machine for damaged parts, loose bolts,

mis-adjusted or mis-aligned parts, binding,

or any other conditions that may affect safe

operation. Always repair or replace damaged

parts, wires, cords, or plugs before operating

machine.

MAINTAIN POWER CORDS. When disconnecting

cord-connected machines from power, grab

and pull the plug—NOT the cord. Pulling the

cord may damage the wires inside. Do not

handle the cord/plug with wet hands. Avoid

cord damage by keeping it away from heated

surfaces, high traffic areas, harsh chemicals,

and wet or damp locations.

EXPERIENCING DIFFICULTIES. If at any time you

are experiencing difficulties performing the

intended operation, stop using the machine!

Contact our Technical Support for help at

(360) 734-3482.

-4-

Model W1686 (Mfg. Since 11/10)

Additional Safety Instructions for

Spindle Sanders

FEED RATE. Never jam a workpiece against

the sanding surface. This can cause the

workpiece to kick back or damage the

machine. Firmly hold the workpiece and

ease it against the spindle using light

pressure.

AVOIDING ENTANGLEMENT. Keep loose cloth-

ing articles such as sleeves, belts or jew-

elry items away from the spindle. These

items could get entangled in the spindle,

resulting in serious personal injury. Never

wear gloves when operating the spindle

sander.

HAND PLACEMENT. Do not place hands near,

or in contact with, sanding surfaces dur-

ing operation to avoid personal injury.

WORKPIECE HANDLING. Hold the workpiece

with both hands, or use the appropri-

ate jig to reduce the likelihood of

the workpiece being thrown from the

machine.

DIRECTION. Never sand tapered or pointed

stock with the point facing the feed

direction to avoid the workpiece being

thrown from the machine.

FOREIGN MATERIAL. Always inspect stock for

nails, staples, knots, and other imperfec-

tions that could be dislodged and thrown

from the machine during sanding opera-

tions.

DUST COLLECTION. Never operate the sander

without an adequate dust collection sys-

tem in place and running to reduce dust

in the work area.

SANDING SLEEVES. Worn or damaged sanding

sleeves can tear apart and become entan-

gled in the spindle or be thrown from the

machine, resulting in personal injury or

property damage. Replace sanding sleeves

as required.

POWER DISCONNECT. Disconnect the machine

from the power source before chang-

ing the sanding sleeve to avoid possible

machine startup.

RESPIRATOR USE. Always use a respirator that

is approved for wood dust when using this

machine to reduce the risk of short and

long term respiratory illness. A dust col-

lector is not an adequate substitute.

Like all power tools, there is danger asso-

ciated with the Model W1686 Oscillating

Spindle Sander. Accidents are frequently

caused by lack of familiarity or failure to

pay attention. Use this tool with respect and

caution to lessen the possibility of opera-

tor injury. If normal safety precautions are

overlooked or ignored, serious personal

injury may occur.

No list of safety guidelines can be complete.

Every shop environment is different. Always

consider safety first, as it applies to your

individual working conditions. Use this and

other machinery with caution and respect.

Failure to follow guidelines could result in

serious personal injury, damage to equip-

ment or poor work results.

-5-

Model W1686 (Mfg. Since 11/10)

Power Supply

Availability

Before installing this machine, consider the

availability and proximity of the required power

supply circuit. If an existing circuit does not

meet the requirements for this machine, a new

circuit must be installed to minimize the risk

of electrocution, fire, or equipment damage,

installation work and electrical wiring must be

done by a qualified electrician in accordance with

all applicable codes and standards.

Electrocution, fire, or equipment

damage may occur if the machine

is not correctly grounded and

connected to the power supply.

Full-Load Current Rating

The full-load current rating is the amperage a

machine draws at 100% of the rated output power.

On machines with multiple motors, this is the

amperage drawn by the largest motor or sum of all

motors and electrical devices that might operate

at one time during normal operations.

Full Load Current Rating @ 120V ........ 12 Amps

Full Load Current Rating @ 240V ..........6 Amps

The full-load current is not the maximum amount

of amps that the machine will draw. If the

machine is overloaded, it will draw additional

amps beyond the full-load rating.

If the machine is overloaded for a sufficient length

of time, damage, overheating, or fire may result—

especially if connected to an undersized circuit. To

reduce the risk of these hazards, avoid overloading

the machine during operation and make sure it is

connected to a power supply circuit that meets

the requirements in the following section.

Circuit Information

A power supply circuit includes all electrical

equipment between the main breaker box or fuse

panel in your building and the incoming power

connections at the machine. This circuit must be

sized to safely handle the full-load current drawn

from the machine for an extended period of time.

For your own safety and protection of property,

consult a qualified electrician if you are unsure

about wiring practices or electrical codes in

your area.

Note: The circuit requirements listed in this

manual apply to a dedicated circuit—where only

one machine will be running at a time. If this

machine will be connected to a shared circuit

where multiple machines will be running at the

same time, consult a qualified electrician to

ensure that the circuit is properly sized for safe

operation.

Circuit Requirements for 120V

This machine is prewired to operate on a 120V

power supply circuit that has a verified ground and

meets the following requirements:

Nominal Voltage .......................... 110V/120V

Cycle ...............................................60 Hz

Phase ..................................... Single-Phase

Circuit Rating ................................ 15 Amps

Plug/Receptacle .......................... NEMA 5-15

Circuit Requirements for 240V

This machine can be converted to operate on a

240V power supply. The intended 240V circuit must

have a verified ground and meet the following

requirements:

Nominal Voltage .......................... 220V/240V

Cycle ...............................................60 Hz

Phase ..................................... Single-Phase

Circuit Rating ................................ 15 Amps

Plug/Receptacle .......................... NEMA 6-15

-6-

Model W1686 (Mfg. Since 11/10)

Grounding Requirements

In the event of certain types of malfunctions or

breakdowns, grounding provides a path of least

resistance for electric current—in order to reduce

the risk of electric shock.

For 120V Operation: This machine is equipped

with a power cord that has an equipment-

grounding wire and a grounding plug (similar to

the figure below). The plug must only be inserted

into a matching receptacle (outlet) that is properly

installed and grounded in accordance with all local

codes and ordinances.

For 240V Operation: The plug specified

under "Circuit Requirements for 240V on the

previous page ha a grounding prong that must

be attached to the equipment-grounding wire

inside the included power cord. The plug must

only be inserted into a matching receptacle (see

below) that is properly installed and grounded in

accordance with all local codes and ordinances.

Grounding Prong

Neutral Hot

5-15 PLUG

GROUNDED

5-15 RECEPTACLE

110V

Figure 1. Typical NEMA 5-15 plug and receptacle.

Grounding Prong

Current Carrying Prongs

6-15 PLUG

GROUNDED

6-15 RECEPTACLE

220V

Figure 2. Typical NEMA 6-15 plug and receptacle.

Serious injury could occur if you connect

the machine to power before completing the

setup process. DO NOT connect to power until

instructed later in this manual.

DO NOT modify the provided plug or use an

adapter if the plug will not fit your receptacle.

Instead, have a qualified electrician install the

proper receptacle on a power supply circuit that

is grounded and meets the requirements for this

machine.

Improper connection of the equipment-grounding

wire can result in a risk of electric shock. The

wire with green insulation (with or without

yellow stripes) is the equipment-grounding wire.

If repair or replacement of the power cord or

plug is necessary, do not connect the equipment-

grounding wire to a live (current carrying)

terminal.

Check with a qualified electrician or service

personnel if you do not understand these

grounding requirements, or if you are in doubt

about whether the tool is properly grounded. If

you ever notice that a cord or plug is damaged or

worn, disconnect it from power, and immediately

replace it with a new one.

Extension Cords

We do not recommend using an extension cord

with this machine. If you must use an extension

cord, only use it if absolutely necessary and only

on a temporary basis.

Extension cords cause voltage drop, which may

damage electrical components and shorten motor

life. Voltage drop increases as the extension cord

size gets longer and the gauge size gets smaller

(higher gauge numbers indicate smaller sizes).

Any extension cord used with this machine

must contain a ground wire, match the required

plug and receptacle, and meet the following

requirements:

Minimum Gauge Size ........................ 12 AWG

Maximum Length (Shorter is Better) .......50 ft.

INSTRUCTION MANUAL

MODEL W1686

SPINDLE SANDER

Phone: 1-360-734-3482 • On-Line Technical Support: [email protected]

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in Taiwan

ONLINE MANUAL DISCLAIMER

THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED. THE MACHINE CONFIGURA-

TION CAN CHANGE AS PRODUCT IMPROVEMENTS ARE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE, THIS MANUAL MAY NOT

EXACTLY DEPICT YOUR MACHINE . CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT DIFFERENCES. PREVIOUS VERSIONS ARE NOT

AVAILABLE ONLINE.

WARNING

Some dust created by power sanding, sawing, grind-

ing, drilling, and other construction activities con-

tains chemicals known to the State of California to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks, cement, and

other masonry products.

• Arsenic and chromium from chemically

treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well venti-

lated area, and work with approved safety equip-

ment, such as those dust masks that are specially

designed to filter out microscopic particles.

TABLE OF CONTENTS

PAGE

1. INTRODUCTION..............................................................................................2

About Your New Sander ............................................................................2

Woodstock Service And Support ..................................................................2

Warranty And Returns ..............................................................................3

Machine Specifications ..............................................................................3

2. SAFETY ......................................................................................................4

Standard Safety Instructions ....................................................................4-5

Additional Safety Instructions For Sander ......................................................6

Avoiding Potential Injuries ........................................................................7

3. ELECTRICAL REQUIREMENTS ............................................................................8

110V Operation ......................................................................................8

Extension Cords ......................................................................................8

Grounding ..............................................................................................8

220V Operation ......................................................................................9

Extension Cords ......................................................................................9

Grounding ..............................................................................................9

3. ASSEMBLY INSTRUCTIONS ..............................................................................10

Unpacking ........................................................................................10-11

Clean Up ..............................................................................................12

General ................................................................................................13

Table/Trunnion ......................................................................................13

Dust Port ..............................................................................................14

Sanding Spindle ................................................................................15-16

Sanding Sleeve ......................................................................................17

Table Insert ..........................................................................................18

4. ADJUSTMENTS ............................................................................................19

Positive Stop Bolt................................................................................19-20

5. OPERATIONS ..............................................................................................21

Test Run ..............................................................................................21

Standard Sanding Procedures ....................................................................22

Bevel Sanding Procedures ........................................................................23

6. MAINTENANCE ............................................................................................24

General ................................................................................................24

Cleaning ..............................................................................................24

Table And Base ......................................................................................24

Sanding Sleeves ......................................................................................25

Lubrication ..........................................................................................25

7. CLOSURE ..................................................................................................26

Wiring Diagram ......................................................................................27

Parts Breakdown And Parts List ............................................................28-31

Notes ..................................................................................................32

Warranty ..............................................................................................33

ELECTRICAL ADJUSTMENTS

OPERATIONS

MAINTENANCE

ASSEMBLYSAFETYINTRODUCTION

USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!

INTRODUCTION

-2-

INTRODUCTION

About Your New Sander

Your new SHOP FOX

W1686 has been specially designed to provide many years of trouble-free service.

Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reli-

able operation.

The Model W1686 is capable of a wide variety of sanding operations. Features include a 1 HP 110/220V

single-phase 1725 RPM motor, a 72 strokes per minute (SPM) oscillation rate, a precision-ground cast iron

table that measures 27

⁄16" x 27

⁄16", a 45˚ front and 20˚ back table tilting capacity, a 4" dust port, and

large assortment of rubber sanding spindles. Whether used in a professional setting or a home shop, the

Model W1686 will be well appreciated as a fine woodworking machine.

Woodstock International, Inc. is committed to customer satisfaction in providing this manual. It is our

intent to make sure all the information necessary for safety, ease of assembly, practical use and dura-

bility of this product be included.

If you should have any comments regarding this manual, please feel free to contact us at:

Woodstock International, Inc.

Attn: Technical Department

P.O. Box 2309

Bellingham, WA 98227

Woodstock Service And Support

We stand behind our machines! In the event that a defect is found, parts are missing or questions arise

about your machine, please contact Woodstock International Service and Support at 1-360-734-3482 or

send e-mail to: [email protected]

. Our knowledgeable staff will help you troubleshoot

problems, send out parts or arrange warranty returns.

INTRODUCTION

-3-

INTRODUCTION

Warranty And Returns

Woodstock International, Inc. warrants all SHOP FOX

machinery to be free of defects from workman-

ship and materials for a period of 2 years from the date of original purchase by the original owner. This

warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents,

lack of maintenance, or to repairs or alterations made or specifically authorized by anyone other than

Woodstock International, Inc.

Woodstock International, Inc. will repair or replace, at its expense and at its option, the SHOP FOX

machine or machine part which in normal use has proven to be defective, provided that the original

owner returns the product prepaid to the SHOP FOX

factory service center or authorized repair facility

designated by our Bellingham, WA office, with proof of their purchase of the product within 2 years, and

provides Woodstock International, Inc. reasonable opportunity to verify the alleged defect through

inspection. If it is determined there is no defect, or that the defect resulted from causes not within the

scope of Woodstock International Inc.'s warranty, then the original owner must bear the cost of storing

and returning the product.

This is Woodstock International, Inc.'s sole written warranty and any and all warranties that may be

implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited

to the duration of this written warranty. We do not warrant that SHOP FOX

machinery complies with

the provisions of any law or acts. In no event shall Woodstock International, Inc.'s liability under this war-

ranty exceed the purchase price paid for the product, and any legal actions brought against Woodstock

International, Inc. shall be tried in the State of Washington, County of Whatcom. We shall in no event

be liable for death, injuries to persons or property or for incidental, contingent, special or consequen-

tial damages arising from the use of our products.

Every effort has been made to ensure that all SHOP FOX

machinery meets high quality and durability

standards. We reserve the right to change specifications at any time because of our commitment to con-

tinuously improve the quality of our products.

Machine Specifications

Motor Size: ..........................................................1 HP 110/220V Single-Phase

Motor Speed ..............................................................................1725 RPM

Amps..............................................................................................14/7

Spindle Size....

⁄4" x 5",

⁄8" x 6",

⁄2" x 6",

⁄8" x 6",

⁄4" x 9", 1" x 9", 1

⁄2" x 9", 2" x 9", 3" x 9", 4" x 9"

Oscillation Speed ............................................................................72 SPM

Stroke Length....................................................................................1

⁄2"

Base Size ....................................................................................16" x 16"

Dust Port ............................................................................................4"

Table ..............................................Precision-Ground Cast Iron 27

⁄16" x 27

⁄16"

Stand ......................................................Cabinet-Style, Powder Coated Paint

Power Transfer ........................................................................Direct Drive

Bearings ......................................Sealed & Permanently Lubricated Ball Bearings

Switch ............................................Paddle ON/OFF Switch, w/ Safety Lock Key

Shipping Weight ............................................................................287 lbs.

SAFETY

-4-

SAFETY

READ MANUAL BEFORE OPERATING MACHINE.

FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL

RESULT IN PERSONAL INJURY.

Standard Safety Instructions

1. Thoroughly read the instruction manual before operating your machine. Learn the applications,

limitations and potential hazards of this machine. Keep manual in a safe, convenient place for future

reference.

2. Keep work area clean and well lighted. Clutter and inadequate lighting invite potential hazards.

3. Ground all tools. If a machine is equipped with a three-prong plug, it must be plugged into a three-

hole grounded electrical receptacle or grounded extension cord. If using an adapter to aid in accom-

modating a two-hole receptacle, ground using a screw to a known ground.

4. Wear eye protection at all times. Use safety glasses with side shields or safety goggles that meet

the national safety standards, while operating this machine.

5. Avoid dangerous environments. Do not operate this machine in wet or open flame environments.

Airborne dust particles could cause an explosion and severe fire hazard.

6. Ensure all guards are securely in place and in working condition.

7. Make sure switch is in the OFF position before connecting power to machine.

8. Keep work area clean, free of clutter, grease, etc.

9. Keep children and visitors away. Visitors should be kept at a safe distance while operating unit.

10. Childproof workshop with padlocks, master switches or by removing starter keys.

11. Disconnect machine when cleaning, adjusting or servicing.

Indicates an imminently hazardous situation which, if not avoided, WILL

result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD

result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY

result in minor or moderate injury. It may also be used to alert against

unsafe practices.

This symbol is used to alert the user to useful information about proper

operation of the equipment.

NOTICE

SAFETY

-5-

12. Do not force tool. The machine will do a safer and better job at the rate for which it was designed.

13. Use correct tool. Do not force machine or attachment to do a job for which it was not designed.

14. Wear proper apparel. Do not wear loose clothing, neck ties, gloves, jewelry, keep long hair tied up,

etc.

15. Remove adjusting keys and wrenches. Before turning the machine on, make it a habit to check that

all adjusting keys and wrenches have been removed.

16. Use proper extension cord. Examine the extension cord to ensure it is in good condition. Use the

chart below to determine the correct length and gauge of extension cord needed for your particular

needs. The amp rating of the motor can be found on its nameplate. If the motor is dual voltage, be

sure to use the amp rating for the voltage you will be using. If you use an extension cord with an

undersized gauge or one that is too long, excessive heat will be generated within the circuit increas-

ing the chance of a fire or damage to the circuit. Never use an extension cord that does not have a

ground pin and connected ground wire. Immediately replace an extension cord if it shows any signs

of damage.

17. Keep proper footing and balance at all times.

18. Do not leave machine unattended. Wait until it comes to a complete stop before leaving the area.

19. Perform machine maintenance and care. Follow lubrication and accessory attachment instructions

in the manual.

20. Keep machine away from open flame. Operating machines near pilot lights and/or open flames cre-

ates a high risk if dust is dispersed in the area. Dust particles and an ignition source may cause an

explosion. Do not operate the machine in high-risk areas, including but not limited to, those men-

tioned above.

21. If at any time you are experiencing difficulties performing the intended operation, stop using the

machine! Then contact our service department or ask a qualified expert how the operation should

be performed.

Operating this equipment has the potential

for flying debris to cause eye injury. Always

wear safety glasses or goggles when operat-

ing equipment. Everyday glasses or reading

glasses only have impact resistant lenses,

they are not safety glasses. Be certain the

safety glasses you wear meet the appropri-

ate standards of the American National

Standards Institute (ANSI).

Length And Gauge

Amp Rating 25ft 50ft 100ft

0-6 #18 #16 #16

7-10 #18 #16 #14

11-12 #16 #16 #14

13-16 #14 #12 #12

17-20 #12 #12 #10

21-30 #10 #10 No

Extension Cord Requirements

SAFETY

-6-

Additional Safety Instructions For Sanders

1. Spindle Rotation: Always brace workpiece against the rotation of the sanding spindle.

2. Finger Safety: Always keep fingertips away from the moving spindle.

3. Sanding Rate: Always use light pressure when holding the workpiece against the sanding spindle.

5. Personal Safety Equipment: Always wear ANSI-approved safety glasses, ear plugs and dust mask.

6. Sand Safe Stock: Always sand stock that is clean and free of defects.

7. Sanding Sleeves: Always replace sanding sleeves that are damaged or worn out.

8. Develop Good Habits: Always follow directions and safety warning to develop good habits.

9. Air Quality: Make sure there is good ventilation and a constant source of fresh air near the operat-

ing sander and always use a dust collector.

10.Allergic Reactions: The saw dust from some species of wood can be toxic to some people. Be sure

to research the dangers of the specific species of wood you are sanding.

INSTRUCTION MANUAL

MODEL W1686

SPINDLE SANDER

Phone: 1-360-734-3482 • On-Line Technical Support: [email protected]

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in Taiwan

Use this and other machinery with caution

and respect and always consider safety

first, as it applies to your individual working

conditions. Remember, no list of safety

guidelines can be complete and every shop

environment is different. Failure to follow

guidelines can result in serious personal

injury, damage to equipment and/or poor

work results.

Read and understand this

entire instruction manual

before using this machine.

Serious personal injury may

occur if safety and opera-

tional information is not

understood and followed.

Do not risk your safety by

not reading!

SAFETY

-7-

Avoiding Potential Injuries

Figure B. Never touch a moving spindle.

Figure A. Never sand a workpiece while holding it

off the table surface.

ELECTRICAL

-8-

ELECTRICAL REQUIREMENTS

Figure 1. Typical 110V 3-prong plug and

receptacle.

Extension Cords

When it is necessary to use an extension cord,

use the following guidelines:

• Use cords rated for Hard Service

• Never exceed a length of 100 feet

• Use cords with 14 ga. wire or bigger

(12 ga., 10 ga., etc.)

• Ensure cord has a ground wire and pin

• Do not use cords in need of repair

Grounding

This machine must be grounded! The electrical

plug supplied with the Model W1686 comes with

a grounding pin as shown in Figure 1. Do not

remove it. If your receptacle does not accom-

modate a ground pin, have it replaced by a qual-

ified electrician or have an appropriate adapter

installed. Please note: when using an adapter,

the adapter must be grounded. An adapter with

a grounding wire does not guarantee the

machine will be grounded. A ground source must

be verified.

110V Operation

The SHOP FOX

W1686 is prewired for 110 volts.

The motor supplied with your new machine is

rated at 1 HP and will draw approximately 14

amps. When choosing a circuit for this machine,

consider using one with a 15 amp circuit break-

er or fuse. Keep in mind that a circuit being used

by other machines or tools at the same time will

add to the electrical load being applied by the

machine. Add up the load ratings of all machines

on the circuit. If this number exceeds the rating

of the circuit wires or circuit breaker/fuse, use

a different circuit.

Verify that your current household circuit wiring

is capable of handling the current load of this

machine. A qualified electrician may need to

install a new circuit with wiring capable of han-

dling a 14 amperage draw. Do not attempt to

modify an existing circuit by replacing the cir-

cuit breaker with one rated for a higher amper-

age.

Any electrical outlet and cir-

cuit that you plug your

machine into must be

grounded. Never remove

the grounding pin from any

plug and always make sure

all wiring to the machine is

grounded before operating.

Serious injury make occur if

this warning is ignored!

ELECTRICAL

-9-

Extension Cords

We do not recommend using an extension cord

with 220V equipment. Instead, arrange the

placement of your machinery and installed

wiring to eliminate the need for extension

cords. If you must use an extension cord, make

sure it is rated Hard Service (grade S) or better.

The extension cord must always contain a

ground wire and plug pin. Always repair or

replace extension cords when they become

worn or damaged.

Grounding

This machine must be grounded! The electrical

cord supplied with the Model W1686 does not

come with a 220 volt plug. Use a plug with a

ground pin as shown in Figure 2. If your recep-

tacle does not accommodate a ground pin, have

it replaced by a qualified electrician or have an

appropriate adapter installed and grounded

properly. An adapter with a grounding wire

does not guarantee the machine will be ground-

ed. A ground source must be verified.

220V Operation

The SHOP FOX

W1686 can also be operated at

220 volts. To do this, consult with the wiring

diagram in the back of this manual. Also, you

will need a NEMA-style 6-15 plug and recepta-

cle as shown in Figure 2.

The motor supplied with your new machine is

rated at 1 HP and will draw approximately 7

amps during 220 volt operation. When choosing

a circuit for this machine, consider using one

with a 10 amp double-pole circuit breaker or

fuse. Keep in mind that a circuit being used by

other machines or tools at the same time will

add to the total load being applied to the cir-

cuit. Add up the load ratings of all machines on

the circuit. If this number exceeds the rating of

the circuit wires or circuit breaker/fuse, use a

different circuit.

6-15P 6-15R

Figure 2. NEMA-style 6-15 plug and

receptacle.

NOTICE

Never replace the circuit breaker with one

rated at a higher amperage or damage to the

circuit may occur.

Any electrical outlet and cir-

cuit that you plug your

machine into must be

grounded. Never remove

the grounding pin from any

plug and always make sure

all wiring to the machine is

grounded before operating.

Serious injury make occur if

this warning is ignored!

ASSEMBLY

-10-

INSTRUCTION MANUAL

MODEL W1686

SPINDLE SANDER

Phone: 1-360-734-3482 • On-Line Technical Support: [email protected]

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in Taiwan

ASSEMBLY INSTRUCTIONS

Unpacking

The Model W1686 has been carefully packaged

for safe transporting. If you notice the machine

has been damaged or is missing any parts,

please contact Woodstock International Service

and Support at 1-360-734-3482 or send e-mail

to: [email protected]

It is absolutely critical that

you read and understand

this entire instruction

manual before performing

any operations with your

machine. Serious personal

injury may occur if safety

and operational informa-

tion is not understood and

followed. Do not risk your

safety by not reading!

The W1686 represents a

heavy load. Seek assis-

tance before moving into

position.

Always make sure that all

entrances to your shop are

locked or that machines

are equipped with safety

lock-out devices to protect

curious children or visitors

from serious injury. Never

allow unsupervised people

in your shop who have not

been fully trained!

ASSEMBLY

-11-

Spindle Sander Base 1

Spindle Sander Table 1

Sanding Spindles 10

Table Inserts 4

Spindle Wrench 1

Hardware Bag 1

Item Qty.

The following is a description of the components shipped with the SHOP FOX

W1688. We recommended

that the components be laid out in a similar fashion to those in Figure 3. This will help in identification

before beginning assembly. Should any parts appear to be missing, examine the packaging carefully. If

any key parts are missing, call Woodstock International, Inc. at 360-734-3482 or e-mail:

[email protected]

Figure 3. Component layout.

ASSEMBLY

-12-

Clean Up

The exposed, unpainted surfaces of the machine

have been coated with an oil to prevent rust

during shipment. This oil needs to be removed

before operation. Use a solvent based degreaser

to remove the oil.

Never use flammables

such as gas or other petro-

leum-based solvents to

clean your machine.

These products have low

flash points and present

the risk of explosion and

severe personal injury!

Most solvents used to

clean machinery are

toxic when inhaled or

ingested. When using

these products, work in

a well ventilated area

and keep away from any

potential ignition

sources (pilot lights).

Always dispose of any

waste rags in a sealed

container to make sure

they do not cause fire or

environmental hazards.

Never smoke while using

any cleaning solvents.

Smoking may cause explo-

sion or risk of fire when

exposed to these products!

NOTICE

Avoid using any chlorine based solutions

because they will damage the painted sur-

faces. Always follow the instruction of the

product being used.

Page is loading ...

Woodstock 1 HP Oscillating Spindle Sander W1686 Owner's manual

Brand: Woodstock

Model: 1 HP Oscillating Spindle Sander W1686

Type: Owner's manual

This manual is also suitable for

W1686

Download PDF

report

Woodstock 1 HP Oscillating Spindle Sander W1686 Owner's manual

This manual is also suitable for

Woodstock 1 HP Oscillating Spindle Sander W1686 Owner's manual

Related papers

Other documents